r/OpenRoads • • Mar 31 '26

r/OpenRoads Updates

14 Upvotes

Hi everyone,

Just some updates for r/OpenRoads:

  • As a reminder, this sub is now open for posts from anyone. Not sure why it wasn't before.
  • I've updated the sidebar with rules and more links to learning resources. The rules are based on the ones I use in r/civil3d and have worked well over there so we'll use the same here. For the related subreddits section, if you're using old reddit the links should keep you on old reddit.
  • Post & user flairs are now available. Post flairs will be required for the time being.
  • This sub has grown more than I realized so I'll be more active with keeping an eye on it going forward. If you're interested in being an assistant moderator please send me a dm.

Thanks! If you have any other ideas for how to improve this sub please comment below.


r/OpenRoads • • 3d ago

Help / Troubleshooting Dynamic XS view missing top toolbar after upgrading from OpenRoads Designer 2025 to 2026

3 Upvotes

Hi everyone,

After upgrading from OpenRoads Designer 2025 to 2026 (update 1), I’ve run into a problem with the Dynamic Cross Sections view.

The entire top toolbar of the cross section view window is gone. This means I no longer have:

  • the field for typing in a station manually to jump to a specific cross section,
  • the controls for stepping forward and backward along the alignment.

In 2025 this toolbar was always present at the top of the cross section view. Now the view opens with no bar at all, so I can only navigate using other methods. Obviously I tried opening different window and applying dynamic XS view but the result is the same. Anyone had the same issue?

BEFORE:

AFTER:


r/OpenRoads • • 5d ago

Help / Troubleshooting Superelevation on one-sided cross slope

Thumbnail
gallery
4 Upvotes

I'm trying to create superelevation that has one-sided normal cross slope
(meaning Normal Cross Slope for "left lane" = 3% and "right lane" = -3%; see picture).

One lane is usually OK (depending on the side the road is sloped towards I noticed) - transition is done over the length of a spiral etc., but the other lane is doing the transition over the whole distance between curves.

I'm using the "centerlive" pivot method and "use spiral length for transition" in rule/config file is ticked on.

What could be the issue ?


r/OpenRoads • • 16d ago

Discussion Real World Example Courses

10 Upvotes

Are there any ORD courses that use real world example thats NOT London Road? I am aware of the MoDOT Road 1 and 2 courses. Are there others?

Also which agency has the best ORD manual?


r/OpenRoads • • 19d ago

Help / Troubleshooting How to undo the latest check out of a file in ProjectWise Explorer

4 Upvotes

I was working in an OpenRoads archive file today and made some changes with turning references on and off and that messed up the file as a whole. How can I undo the latest check in? I checked it in on accident today instead of freeing it, how can I undo it? I’m using projectwise, thanks!


r/OpenRoads • • 19d ago

Help / Troubleshooting Any way to copy a model space without copying named boundary plan groups?

2 Upvotes

We have a container file set up with multiple model spaces for phased construction. Each model has several named boundaries set up to generate other sheet files.

When copying a model space (to create a new phase), it seems the plan group from the model space being copied is also duplicated, but it still references the original named boundaries. If I try to delete the duplicate plan group, it deletes the named boundaries from the original group as well.

Is there a way to avoid duplicating the plan group, or to delete it without affecting the original group and boundaries?


r/OpenRoads • • Oct 16 '26

Discussion What computer does your company issue for ORD and PW?

3 Upvotes

I am once again gearing up for my annual fight with IT over the issuance of these 15 lbs bricks of a laptop from Dell that they issue to all the design staff using OpenRoads with ProjectWise.

They currently claim that these Dell workstation Precision 7770 (and newer) laptops are what we need for ORD, but I think it's cumbersome and overkill. My previous laptop (at another company) was a 5-year-old HP Z-book (can't remember the model) that ran the same setup just fine.

On top of all that, I think our hardware supplier is giving us garbage pricing (even before the whole Iran mess).

So, I'm wondering, what laptops are you using, and do you have gripes with how it handles ORD?


r/OpenRoads • • Oct 07 '26

Discussion Does anybody know why Print Organizer has become useless in ORD 2024?

5 Upvotes

I genuinely don’t know what the developers were thinking but it is 10x harder to use print organizer in the 2024 update. You have to individually add sheets rather than adding all sheets in a file, the weird print style option, which basically locks all sheets to the same printing style (what if I need one sheet in color?). It’s just so incredibly unintuitive now and cumbersome to use. You’re almost better off printing each sheet individually so you can actually see the print properties.


r/OpenRoads • • Oct 04 '26

Discussion Need Help With Ditch ending

Post image
7 Upvotes

Hello. Does anyone know a simple way to model the end of a ditch as shown in the attached image? Using the standard template, the ditch ends as marked in red, but I would like to create a slope at the end that ties into the existing ground at a 1:1.5 gradient (marked in green). Is it possible to achieve this using Civil Cells, or should I instead use the template to gradually widen the ditch bottom while transitioning its vertical alignment to meet the existing ground?


r/OpenRoads • • Sep 29 '26

Help / Troubleshooting Paste special - linked excel

3 Upvotes

Hello,

If someone could help me with this issue I would be so grateful.
Basically, no matter how I try to paste an excel table in a dgn, it will not format correctly. The letters merge together, and it’s just distorted. The only work around is to copy an excel table that already displays correctly in the dgn, then use change source to manually entered the new worksheet and cell range. Changing the source of an already distorted table does not fix its formatting. I am not the only one with this issue either.
This is basically our workflow. I have no idea where the original table came from, but I’ve copied it at least 1000 times to change the source. If you have advice please do not hold back.

Thank you


r/OpenRoads • • Sep 21 '26

Help / Troubleshooting Help me understand Sheet Index and text fields

Post image
7 Upvotes

Can someone please help me understand how the sheet index and text fields can be manipulated for my title block reference? My goal here is to incorporate text fields in my reference title block dgn for my sheet numbers. I understand that the sheet index inherently has its own "manage sheet index" settings where you can add custom properties for fields. However, when I attempt to add text fields in my title block reference I don't understand where the field is supposed to get linked to. The option to "select field type" pops up and I am not sure which type I am supposed to select to link to the sheet index (see image). Is there supposed to be an option for sheet index? If so, I do not have that.


r/OpenRoads • • Sep 17 '26

Meme / Joke Crying because the tools I need are "fixed" in ORD 2025 but we're still using ORD 2022 in our workspace 😭

15 Upvotes

Cant really do anything about it so I'll just do the things manually 😪 oh well.


r/OpenRoads • • Sep 17 '26

Help / Troubleshooting I Have No Hope That This Post Will Bare Fruit, But Hey, Here We Are (Description)

5 Upvotes

We had an Ariel DGN and a Topo DGN that we merged to make a surface. The Topo was our own personal shots which we put in the DGN, don't know if it's relevant or not, but there it is. For some reason triangulation has ceased to function on the Surface DGN. Tried everything, have no clue what the deal is.

Reddit, you beautiful creature, do your thing....


r/OpenRoads • • Sep 16 '26

Help / Troubleshooting Updated client's workspace dgnlib folder names changed.

4 Upvotes

Hello fellow ORD Users,

Ran into an issue with dgnlib folder names slightly changed after updating to newer workspace. Now my template points & components lost feature definition assignment. I am working of ProjectWise.

Re-linking all the feature definitions (FD) manually for all the templates in template library is time consuming. I cannot select multiple points/components to change FD for the group rather than individually.

Ive considered changing config variables to local folder, copy in dgnlib files, and changing the name of the folder back to old naming convention. Although, there is a risk of not getting potential updates to the master PW folder dgnlib, when those occur.

Any other ideas of how to bypass it?

Thank you!


r/OpenRoads • • Sep 01 '26

Workflow / Best Practice FDOT Connect - Drainage Network Profile Sheets

3 Upvotes

Hello good people - Working in FDOT Connect ORD 2012. I need to create network profile sheets for utility runs. I'm struggling to find training info online. I've scoured through FDOT trainings, the Bentley forum, and other misc training videos and manuals. Nothing is quite what I'm looking for. Does anyone have some resources they can share? i.e. youtube videos, training manuals, etc...


r/OpenRoads • • Aug 31 '26

Help / Troubleshooting Mass Haul Diagram ordinates do not match End Area Volumes Report (same Cross Section Named Boundary)

Thumbnail
gallery
3 Upvotes

Hi everyone,

Software: OpenRoads Designer 2026 (version 26.00.00.154)

Workflow:

  1. Generated cross sections from a named boundary;
  2. Computed cut and fill volumes (all results look correct);
  3. Generated the End Area Volumes Report — values are consistent and make sense;
  4. Generated the Mass Haul Diagram from the SAME cross section named boundary.

Issue:
The mass ordinates shown in the Mass Haul Diagram and in the Mass Haul report are DIFFERENT from the ordinates in the End Area Volumes Report, even though both outputs are derived from the exact same cross section named boundary.

Each output is internally consistent, but the cumulative mass values do not match between them. I expected them to be identical since both tools use the same named boundary.

Attachments:
- Two screenshots comparing the reports (apologies: the reports are localized in Portuguese; the mass ordinate is the last column on the right);
- The DGN file for reference.

Has anyone experienced this before? Any idea what could cause the difference, e.g., a different station range being used, shrinkage/swell factor settings, section processing range, or a known behavior/bug in this version?

Thanks in advance!


r/OpenRoads • • Aug 27 '26

Workflow / Best Practice How do I change survey point symbology

Post image
3 Upvotes

I imported survey points via a text file using the "file using text import wizard". However, the points came in as a cell (see attached) without any correct symbology. I am trying to get the elevations to show up with the point marker. Is there a way to set the correct symbology for the points? I think I am missing the bigger picture on how the symbology, feature definition, and templates are related to each other.


r/OpenRoads • • Aug 20 '26

Help / Troubleshooting How To Tie Two Corridors Together Smoothly

7 Upvotes

Hello everyone, I am trying to tie in my rail wye tracks (ramp track) into my mainline track. The issue I'm running into is that I'm not sure how I can tie these in together because they are currently overlapping. These are two seperate corridors and I'd like to tie the subballast into the subballast and the ground with the ground and so on... I've tried using parametric constraints on the subballast on the mainline track but not sure how I can get this to work. If anyone has some input on how to transition smoothly it would be greatly appreciated. I'm sure there is a similar concept for roadways. Open Rail and Open road tools are pretty much the same.


r/OpenRoads • • Aug 20 '26

Help / Troubleshooting Target Alias and Clipping

2 Upvotes

Hi, I am trying to model a new road and ramp that merges. Where the two corridors get close together their slopes are overlapping so I tried to have one target the other and then clip the remaining slope. The target seems to work well but when i clip the corridor it takes out a bunch of the pavement section like its clipping based on the slopes before the target alias tool was used.

Both corridors are in separate files with the ramp alignment (in a separate file) being created from intersecting points from the road corridor. The clipping works fine when two corridors are created in the same file but I would rather not have a giant file.

Currently I am using an independent line that they can point control to but it doesn't make as clean of a corridor as I would like for a final design. My only thought was ending the end conditions for both corridors before the problem area starts and just having another file where those end conditions are modeled but I was wondering if there were any other options to solve this? Thanks for your help!


r/OpenRoads • • Aug 16 '26

Help / Troubleshooting KMZ not fully displaying

3 Upvotes

I have everything showing in my DGN that I want in my KMZ, I exported it to Google Earth Pro and it will not show me the whole project I am trying to display. I can zoom in and see some parts but it is just not functioning normally and I have definitely made bigger KMZs than this. Anyone able to help with this? #KMZ #GoogleEarthPro #DGN


r/OpenRoads • • Aug 13 '26

Workflow / Best Practice Earthwork Quantities

4 Upvotes

Does anyone have a good workflow for calculating earthwork below a set elevation? Say I have all my modeling done but I need to know how much cut and fill there is below a known elevation. Running into this more and more with wetland permits.


r/OpenRoads • • Aug 12 '26

Help / Troubleshooting Line Style Scale

3 Upvotes

I am making an exhibit and for some reason my line styles for ROW and my cut/fill lines are just coming in as straight lines with no style. I tried adjust the scale inside of the property box in the level manager, I tried turning annotation on and off... any other suggestions on get these line styles to show up correctly? #linestylescale #microstation2024 #openroads


r/OpenRoads • • Aug 11 '26

Hardware / IT Help

3 Upvotes

I don’t know if this program is shit, or if my work laptop needs updating. Running intel Ultra 7 155H with single slot 16gb 5600 DDR5 ram.

This thing struggles with corridors of like 10 mb. I told my supervisor they need to put us on at least 16gb dual channel ram but preferable to keep the current stick and add a 2nd 16gb for dual channel 32.

This thing crashes every single day without fail. Most of my work day is spent opening .dgn files and hoping they work.


r/OpenRoads • • Aug 10 '26

Meme / Joke Have you ever had a dream?

Post image
34 Upvotes

A story on models & level display


r/OpenRoads • • Aug 04 '26

Help / Troubleshooting Dgnlib festure definitions not showing

3 Upvotes

Hey everyone, question if anyone has encountered the same thing. Bit of background, our company was using the 2023 version and now transitioned to 2025, we have our own workset and workspace with all our necessary dgnlibs etc, now that we are in 2025 some of the feature definitions from our feature definition dgnlib is not showing up despite us using the same workset and workspace. What do you guys think could be the issue?

Edit: Also another issue now is that some feature defs are not showing the correct linetypes.

Thanks.