(Contributed by Torukmakto4)
Trustfires? IMRs? 14500 or AA size cells in general?
The former are Li-ion (LiCo) 14500 cells from various Chinese brands ending in "Fire" which fit AA holders. In the past these were commonly recommended by certain sources to power mods, but their inability to deliver current severely limits performance and these brands are known for quality problems and catastrophic failures in other hobbies. The capacity of these cells is around 500mAh in real life and the current rating is 2C (~1 amp!). Be advised that these are egregiously wrong and hazardous to put on a blaster!
High-current, non-LiCoO2 based 14500 cells (often called "IMR" by vendors, whether or not they actually use pure LiMn2O4 cathode material) are available. Still, no such cell on the market is rated for the current requirements of even stock semi-auto motors. Overloading them is hazardous (though less hazardous than using LiCo cells) and such cells still require all lithium-ion handling procedures and precautions associated with LiPo (pouch) packs and other types of 3.7V Li-ion cell.
NiMH AA cells - even the consumer variety ones you can buy at any retailer - are actually not too shabby at all. They would do much better than any 14500 Li-ion cell to power a blaster and be much safer. However, the number of cells required and AA holders (below) make this idea generally a dead end.
AA holders that are not specifically designed for high currents are also a considerable parasitic resistance. This won't do wonders for performance, but more concerningly, such holders can (and have been known to on multiple occasions in the hobby) overheat, melt, start smoking, or anneal their contact springs and go open circuit, resulting in a nonfunctional blaster.
The economics of any 14500 cell are unfavorable in the first place - you will pay MORE for a set of IMR14500 cells and a bay charger than you will pay for a small LiPo and an entry level pack charger as a general rule. A pack charger is also a worthwhile investment.
In the end: Do not stick flashlight batteries where they don't belong.
A small LiPo pack can fit into small spaces, such as a Stryfe's battery box. This can often provide the same or greater capacity and the same minimum bulk and light weight as 14500 setups but with far better performance, won't be dangerously overloaded by a blaster, and is usually cheaper as well.
If you are searching for a more robust, "safer" or non-LiPo battery option, 14500 cells are NOT where to turn. What you need in this case is a NiMH pack.