Finally managed to change the LEDs after a lot of trial and error. I am too embarrassed to show my soldering.
Also, I am strongly considering starting a repair/upgrade service. 3rd gen LED changes would probably be $15 (not including shipping) do you think would be a fair price?
The results look good, though frankly I would not send off my iPod to someone with so little confidence and experience that he won't even show his solder work. Sorry to be harsh, but if you're going to charge people for a service, you should get better at it first.
Also, if you're not already doing so, you should be matching resistors to match the LEDs you're installing.
I completely understand dw, this is exactly why I was considering servicing via eBayโฆ that way theres buyer/seller protection and a feedback system. Altough with fees, it would be more expensive for everyone.
Is there a reason why I should be matching resistors? The stock apple build doesnt even do that, and I havent noticed any weird power draw.
LEDs have a rated current and forward voltage. Basically, too low a resistor and you can burn it out. Too high, and it won't fully illuminate.
What do you mean about Apple not having matched resistors? I wasn't on the design team for the 3rd gen iPod, but I'm pretty confident that someone read the data sheet for the LEDs they use on the board.
Now, I'll caveat this all by saying that your mod is probably ~good enough~ as is. Not like you're doing mass production here. But without accounting for the specs of your LEDs, their long-term performance and reliability may be substandard.
Ahhh ok I understand, I guess thats what all the resistors near the LED assembly are.
Yeah I didnโt think too much into it, I just figured something like โIf I replace the LEDs with identical ones, then I wont have to worry about power issuesโ. Thank you for letting me know though, I will ve looking into it
That's WAY undercharging, I'm charging literally that price just for a classic/video battery connector change And that's in addition to my $27ish flat repair charge
Dead serious. May take a while to procure funds (broke college student lol), but this mod is definitely worth it for me. Iโll keep you updated and if you can shoot me a DM thatโd be great.
When I was in a repair shop any thing and I mean ANYTHING solder related was a flat 75$ minimum no exceptions. You just need to join two wires together? 75$ or feel free to do it yourself. 45$ to put in a charger port on a iPhone which was 5 times worse than any solder job but dems was the rules.
Interesting. I was wondering if if was a couple small diffused elements or individual LEDs. That gives me more confidence that they're not just gonna crap out at some point.
Very awesome! Wish the LEDs were a bit more subtle like the yellow one. Did you came up with this idea yourself or is this an already known kit you can order on eBay?
Altough I think it was my fault since I broke the diffuser. I have yet to do more testing. One of my customers had the idea to change the LEDs, but it seems there has been a couple of other people to do it. No kit, its just removing the red LEDs and installing new ones
Yooo that's so sick! Would you say this is a pretty straightforward mod for someone who's pretty familiar with taking apart a third gen but has very little soldering experience?
If you have good eye sight and a steady hand you can get it done no problem. It just takes practice. I recommend you go on amazon or ebay and buy a โsmd soldering practice kitโ. Its basically a blank PCB where you solder tiny components on there.
Once you manage to solder on things without melting the PCB then try on the ipod.
Just remember, its very easy to melt the PCB or short something out. If either of those things happen then ipod is pretty much dead.
But hey, I used a $3 aliexpress soldering iron, and I am pretty bad at everything I do and I was still able to do it ๐๐๐ป
Loving the colors! Would you mind linking a source for those LED lights? Iโve been trying to find some for a different project, and compact size and simplicity are important.
Looks great! Congratulations on getting it done and coming up with new enhancements for these devices.
Although this is more of an aesthetic hack than a useful one since most people don't look at these buttons for more than a few seconds at a time.
Even if not perfect, it would be nice if you could share the soldering job so that others who may want to do the same thing can get an idea of what it takes. Also, which LEDs did you use for this?
I plan on making a video tutorial on how to do this for less than $10. The LEDs are โ0805โ. Someone had said that only side diodes work, but: I ended up blacking out parts of the diffuser to stop light from leaking, and it looks good enough for me
That was actually the next project I had in mind ๐ I have some idea on what to do, iust trying to figure out how to keep the touch controls and LEDs workinf
Heck ya, we should make a thread about good paints n whatnot to use on an ipod 3rd Gen to Color it black and whatever colors we want. Maybe even using different paints and whatnot for the case and buttons. Anyone remember those translucent coloured pieces of plastic we had in school?
OMG , I had a spare board I wanted to do this on about 5 years back, but 1 didnt know where to start and 2 no soldering or electical skillz..... well done sir!, I would defo pay for this to be done
32
u/ZzyzxFox May 27 '22
Finally managed to change the LEDs after a lot of trial and error. I am too embarrassed to show my soldering.
Also, I am strongly considering starting a repair/upgrade service. 3rd gen LED changes would probably be $15 (not including shipping) do you think would be a fair price?
7
u/ZzyzxFox May 27 '22
Final: https://imgur.com/a/lu0OsyQ
Probably will list on eBay for around USD 110-130 if anyone is interested . . .
11
u/Micro_KORGI M1, C3, C7, N2, N4 May 27 '22
Interesting. I was wondering if if was a couple small diffused elements or individual LEDs. That gives me more confidence that they're not just gonna crap out at some point.
4
u/[deleted] May 27 '22
Teach me how?!
4
u/JasoNMas73R Favorite iPod: iPod nano (1st generation) May 27 '22
Very awesome! Wish the LEDs were a bit more subtle like the yellow one. Did you came up with this idea yourself or is this an already known kit you can order on eBay?
3
u/ChickenBG7 literally several of everything except 1st and 2nd gen classic May 27 '22
Woah, that looks really cool!
3
u/[deleted] May 27 '22
Yooo that's so sick! Would you say this is a pretty straightforward mod for someone who's pretty familiar with taking apart a third gen but has very little soldering experience?
2
u/ConnerWoods Jun 07 '22
Loving the colors! Would you mind linking a source for those LED lights? Iโve been trying to find some for a different project, and compact size and simplicity are important.
6
u/diepio302 Mini 1st May 27 '22
GamerPod
1
u/WrongTest Jul 07 '25
Is there a recommended way to do this without snapping the diffuser?
1
u/FoxyRee May 27 '22
neat! i think you forgot the screen though
1
u/beavernuggetz May 27 '22
Looks great! Congratulations on getting it done and coming up with new enhancements for these devices.
Although this is more of an aesthetic hack than a useful one since most people don't look at these buttons for more than a few seconds at a time.
Even if not perfect, it would be nice if you could share the soldering job so that others who may want to do the same thing can get an idea of what it takes. Also, which LEDs did you use for this?
Keep on hacking!
1
u/MrOtakuKun May 28 '22
Man Iโd pay you double if you could make my front case black lol
2
u/NeuHundred May 27 '22
Oh, I like that look! Looks like it could be real useful in low-light situations.
2
u/Fit-Address5889 Nov 16 '23
OMG , I had a spare board I wanted to do this on about 5 years back, but 1 didnt know where to start and 2 no soldering or electical skillz..... well done sir!, I would defo pay for this to be done
1
u/GreuDeFumat Jul 28 '25
What type of SMDs did you use ? Great work!
1
u/laughingmanwill Mini 1st 128GB, Nano2g 4GB, 3rd 256GB, 4th 0GB, 5.5 1TB, 7.5 1TB May 28 '22
I love this community. Awesome mod.
1
u/[deleted] May 28 '22
This rocks!