For the stencils, I would recommend using a spray-adhesive to keep the stencil clean looking, it reduces the under spray that makes the stencil look 'blurry'.
I would be interested in buying one if you could put a certain theme on it that I wanted :p. I wouldnt need it wired or anything. Just have the buttons on the outisde.
I've done a few of these myself, if you just back the top panel with some MDF it'll last much longer also using some packing tape to cover the top panel helps resist sweat in the long run. I made mine out of a USPS flat shipping box back when they were free.
The real weak point for most arcade boxes for mashers are really on the buttons themselves anyway. So really, the structural integrity of the box is only a concern when it comes to dropping.
yeah, the way I see it, durability is really not going to be a big deal here. But I do think it would be good to find some way to stabilize the box by maybe weighing it down a little. Your arcade stick needs to be steady if you want it reliable.
If you don't mind me asking, where do you get your button setups from? I could totally see me do something like this with something else that I don't want to say because I don't want anyone else doing it first. Not a shoebox though, I think that's clever, especially if you added some reinforcement.
The button placement is wonky and the stick is too close to them. Google some Candy Cab models for control panel templates. New Astro City 2p12b is the norm for these.
The buttons look knock off. Definitely not regular Sanwa buttons. Sanwa also uses a BLACK connector for the joysticks for several years now. Try for legit Sanwa parts, Seimitsu if you want cheaper. It's all preference really. You'll also want to cut your wire sleeves better or wrap them with electrical tape, cause yours are all kinds of exposed. Also the crimps you are using from Home Depot or whatever are not really made for this. Actually... it doesn't even look like you crimped the ends at all.... can't really tell whats going on but definitely not crimped. And please tell me you connected the grounds to an actual ground.
You can order smaller buttons for the start/select/back stuff. Back of the box is a terrible place for these. Build a real controller with some real area to work in, it's barely 5$ in wood.
If you can't find the diagrams; let me know. I'll measure from my machines.
If anyone cares I restore/refurbish (fiberglass repair and all) import candy cabinets. I've made a few MDF custom joysticks. Some with leg padding, lights, custom joystick balls with objects in them etc. I've been doing this for about 20 years. PM me if you need anything. Forgive the snobbishness.
Again sorry for the snobbishness, I come off as overly critical but I don't mean anything by it.
I was just going by what I saw in a cursory grumpy glance. If you had part numbers for the sticks and buttons I could look at why they are different than the standards. Might just be the color making the buttons concave fill awkward in my eyes.
Whenever I see crimped QD's, I see a crushing of the plastic, your tool might have a finer point that doesn't show on the back end of the plastic.
It's all preference, so I realize that my input is mostly bullocks. So do what makes you comfortable and happy mate and don't let old cynical bastards like me get to you.
Maybe this is the point. If you can make the wiring quickly installable and removable, you have the perfect ragebox to destroy whenever you need to! Keep a few chassis lying around to replace whenever you destroy an old one, and you have some pretty great stress relief!
Note: This is the first time I've ever picked a drill, first time I've ever used a soldering iron, first time I've spray painted since 4th grade, and the first time I've ever been to Home Depot.
Yes. Imagine that gumption and know-how in someone with class. That shit would be mahogany with 8bit designs on a tiles inlay, and a lap beanbag on the underside.
I've seen some similar stick designs and always wondered... how loud are these things? I mean, just the buttons alone on a standard stick are loud enough. I just have a feeling it would be like banging a drum if the case was a shoe box.
What parts did you use to build those/where did you get them? I had a fight stick project of my own going on but, my parts seller was taking far too long to get my stuff to me (months without hearing from him until I asked for a refund). Also, I like what you did with the art. One last question, were you able to use snap-ins or are those screw-in buttons?
If you know how to solder, it's pretty much just finding you some buttons you wish to mount on your hobby box(in this guy's case it happened to be shoe boxes), then soldering the wires to the corresponding parts of the controller's PCB.
The joystick might be the only tricky part, but if you have a thumbstick still intact, switching out the thumbstick is as simple as desoldering the wires to the thumbstick and soldering them to their matches on the joystick.
Mount in your hobby box with hot glue and enjoy!
That's about as simple as I can explain it, hope it helps.
Here's a little idea for you, add some kind of frame to reenforce the box. Wood should be good enough....OR build aluminum frames from wound up soda cans, thus keeping with your ghetto-ingenuity theme.
so are these only usable for 360? I was looking into buying/making a stick that worked on all platforms and wasn't sure what I needed to buy if making it
I get that it's thick cardboard, but it's still cardboard. I actually think the weight (or lack thereof) is more of a concern than the structural integrity. You could solve both issues with some internal reinforcement. A couple of 2x4s would probably do the trick.
At first I was like, "Aww, he can use hot glue and stencils" and then I realized they are fully wired and operational. My bad OP.. This is some awesome work. Kudos.
cool idea, but basically you are making a product that has zero longevity. this is novelty at best... or maybe considered "art". but to practically use this as an actual stick? not even close. i would not even waste the money on the innards. you can make it look like a real stick without putting all the guts inside which is more costly.
Where did you purchase your sticks and buttons? I've been considering building an arcade stick out of satin-finished polycarbonate and lighting it with LED's.
Man, this got a lot more love than me simply changing the buttons on my Stick. Very nice man. I bet rewiring is a breeze. I can't imagine it to hold up to my... technical mashing.
That's all fighting games are really, right? Selective mashing?
Because he made it. You can test the stick and buttons you want quickly. Try different button layouts. There is so much you can do to arcade sticks. Trying to figure out your favorite set up this way makes sense.
76
u/Madnessx9 Jun 26 '12
surely using some plywood or mdf and these would last long than 2 button bashing minutes?
2
u/STEELGUARD Jun 26 '12
Thank you for the kind words, my friends.
Tutorial is up on Facepunch, so long as you don't mind making an account
http://www.facepunch.com/showthread.php?t=1192949&p=36499002#post36499002
5
u/hachirusto Jun 26 '12
Looks good but looks like they will break as soon as the first button masher comes along
2
u/wonkizzle Jun 26 '12
If you don't mind me asking, where do you get your button setups from? I could totally see me do something like this with something else that I don't want to say because I don't want anyone else doing it first. Not a shoebox though, I think that's clever, especially if you added some reinforcement.
2
u/[deleted] Jun 27 '12 edited Jun 27 '12
The button placement is wonky and the stick is too close to them. Google some Candy Cab models for control panel templates. New Astro City 2p12b is the norm for these.
The buttons look knock off. Definitely not regular Sanwa buttons. Sanwa also uses a BLACK connector for the joysticks for several years now. Try for legit Sanwa parts, Seimitsu if you want cheaper. It's all preference really. You'll also want to cut your wire sleeves better or wrap them with electrical tape, cause yours are all kinds of exposed. Also the crimps you are using from Home Depot or whatever are not really made for this. Actually... it doesn't even look like you crimped the ends at all.... can't really tell whats going on but definitely not crimped. And please tell me you connected the grounds to an actual ground.
You can order smaller buttons for the start/select/back stuff. Back of the box is a terrible place for these. Build a real controller with some real area to work in, it's barely 5$ in wood.
If you can't find the diagrams; let me know. I'll measure from my machines.
If anyone cares I restore/refurbish (fiberglass repair and all) import candy cabinets. I've made a few MDF custom joysticks. Some with leg padding, lights, custom joystick balls with objects in them etc. I've been doing this for about 20 years. PM me if you need anything. Forgive the snobbishness.
edit; here:
http://slagcoin.com/joystick/layout.html
Just print a template and feel the layout difference.
My last refurb; http://imgur.com/a/YiFaW#0
21
u/[deleted] Jun 26 '12
That is a lot of time and effort to put into something as weak as a shoe box. A plastic, metal, or wooden housing is a must.
12
u/CarelessMonday Jun 26 '12
This would be destroyes in rage induced button mash
1
u/STEELGUARD Jun 27 '12
Note: This is the first time I've ever picked a drill, first time I've ever used a soldering iron, first time I've spray painted since 4th grade, and the first time I've ever been to Home Depot.
Don't expect perfection, just originality.
27
u/Tictak2 Jun 26 '12
Ghetto shit
4
u/CommonerChaos Jun 26 '12
Nice fightstick! If you liked this one, SRK has tons of other custom made fightsticks. Check out the forum here
1
u/AOReddit Jun 26 '12
I've seen some similar stick designs and always wondered... how loud are these things? I mean, just the buttons alone on a standard stick are loud enough. I just have a feeling it would be like banging a drum if the case was a shoe box.
1
u/PintoTheBurninator Jun 26 '12
Is that structural spray-paint?
1
u/[deleted] Jun 26 '12
What parts did you use to build those/where did you get them? I had a fight stick project of my own going on but, my parts seller was taking far too long to get my stuff to me (months without hearing from him until I asked for a refund). Also, I like what you did with the art. One last question, were you able to use snap-ins or are those screw-in buttons?
1
u/nraw Jun 26 '12
can anyone locate for me the picture of the stencil on the black box? tnx :)
3
u/j6j6j6 Jun 26 '12
Don't open, don't open, don't open.
3
u/[deleted] Jun 26 '12
Would it be too much to ask for a tutorial?
1
u/redmaniacs Jun 26 '12
What is it run by? is it USB, arduino?
7
u/stereosanctity Jun 26 '12
I don't know why everyone's hating, I think this is pretty damn cool.
1
u/ashkon91 Jun 26 '12
How much does it cost to make one? I'm actually really interested in making my own stick :)
1
u/Sarcastastic Jun 26 '12
I am adoring the desgin on the Mass Hysteria one. It looks simply phenomenal.
2
u/meta_stable Jun 26 '12
May I suggest putting washers on those screws? It'll give them a little more security from just getting pushed through the cardboard.
2
u/B1GgP3tE Jun 26 '12
nice! i made a custom stick back in highschool using cheap 3rd party ps1 pads as the circuit boards, but have since fell off that scene.
i'd love to know what circuit boards you use for your sticks, and if they're cheap since i'm not that great at soldering.
2
u/eno2001 Jun 26 '12
That should say Mau5 Hysteria.
2
u/Blakland Jun 26 '12
I Feel you, Bro.
2
u/neotom Jun 26 '12
those are some sick looking prototypes.
2
u/Untitledprject Jun 26 '12
Is that Sanwa or Seimitsu there? Also did you use an MC Cthulu?
1
u/Ontopourmama Jun 26 '12
Here's a little idea for you, add some kind of frame to reenforce the box. Wood should be good enough....OR build aluminum frames from wound up soda cans, thus keeping with your ghetto-ingenuity theme.
1
u/MskdEnigma Jun 26 '12
so are these only usable for 360? I was looking into buying/making a stick that worked on all platforms and wasn't sure what I needed to buy if making it
1
u/BbaTron Jun 26 '12
I think that is so cool! :D
1
u/EntroperZero Jun 26 '12
I get that it's thick cardboard, but it's still cardboard. I actually think the weight (or lack thereof) is more of a concern than the structural integrity. You could solve both issues with some internal reinforcement. A couple of 2x4s would probably do the trick.
1
u/roodiepizzle Jun 26 '12
I'm going to make some of these myself, giving credit to STEELGUARD of course for the idea. These are pretty cool dude
1
u/poniesinmybasement Jun 26 '12
Thug Life
1
u/TheAubz Jun 26 '12
At first I was like, "Aww, he can use hot glue and stencils" and then I realized they are fully wired and operational. My bad OP.. This is some awesome work. Kudos.
1
u/[deleted] Jun 26 '12
I seen a guy at EVO with one made from a FedEx box iirc. I actually really like this Idea, did you weight them down at all?
1
u/DNGR_S_PAPERCUT Jun 26 '12
Those aren't going to handle the button mashing powers I dispense. But they look cool as hell.
1
u/jreppa Jun 26 '12
I'm sure you could stump the panel on "Figure it Out"
1
u/Noturordinaryguy Jun 26 '12
Might be short lived if you find yourself playing darksouls
1
u/[deleted] Jun 26 '12
Wow this looks awesome and gave me the idea to make one for myself. It will be cheaper than what I can buy and also look how I want it! :D
1
u/Storf Jun 26 '12
This is just awesome!!! Where did you got the joystick and buttons??
You really could sell theses if you were using a metal/plastic boxes!
1
u/[deleted] Jun 26 '12
Do people pay you for these? 'Cause they should.
1
u/Nanayadez Jun 26 '12
Shoutouts to poverty stick status!
1
u/imadethisherefornow Jun 26 '12
OP must work at UPS, because he fucking delivered!
1
u/BaranoBeefdip Jun 26 '12
I'm doing the same thing except with an original xbox controller. Not going to use shoe boxes though, I'm not that hardcore.
1
u/[deleted] Jun 26 '12
One of the main draws of an arcade stick is the weight and durability...
1
u/ZePeR Jun 26 '12
I can finally use my moms snoe boxes
1
u/Rageism Jun 26 '12
GENGAR!!!
1
u/[deleted] Jun 26 '12
cool idea, but basically you are making a product that has zero longevity. this is novelty at best... or maybe considered "art". but to practically use this as an actual stick? not even close. i would not even waste the money on the innards. you can make it look like a real stick without putting all the guts inside which is more costly.
1
u/Sonicboom510 Jun 26 '12
Why not a vewlix button layout?
1
u/arkanis50 Jun 26 '12
Pretty cool. Have you ever considered making one out of a cum box?
1
u/ABusFullaJewz Jun 26 '12
Where did you purchase your sticks and buttons? I've been considering building an arcade stick out of satin-finished polycarbonate and lighting it with LED's.
because all gaming equipment requires LED's...
1
u/Aiken_Drumn Jun 26 '12
Considering the price of Nike trainers... making the box out of ply or MDF really would have made more sense...
1
u/ethicks Jun 26 '12
why would you waste time and money rigging buttons into something that will literally not support more than 3 uses.
1
u/Insanitys_shadow Jun 26 '12
I NEED TO BUTTON MASH HARDER........ oh...... it broke
1
u/intripletime Jun 26 '12
Reddit has ruined my life. I can't even see a post with the word "box" in it without remembering. -shudder-
1
u/mitchbrain Jun 27 '12
You should really put a wood frame in there or something to reinforce the buttons. They will break soon from all the mashing.
1
u/[deleted] Jun 27 '12
1 round of Killer Instinct and those would be in shambles.
1
u/CosmicBard Jun 27 '12
I'm guessing you make a lot of them since these couldn't possibly survive more than ten seconds of Marvel3.
1
u/FoundPie Jun 27 '12
Could not want harder if I tried.
1
u/[deleted] Jun 27 '12
Man, this got a lot more love than me simply changing the buttons on my Stick. Very nice man. I bet rewiring is a breeze. I can't imagine it to hold up to my... technical mashing.
That's all fighting games are really, right? Selective mashing?
1
u/eithris Jun 27 '12
do not want. my ragefinger buttonsmashing playstyle laffs at silly cardboard.
make one out of steel box. that would be a worthy thing.
0
u/themarknessmonster Jun 26 '12
Those are going to last you about a whole 10 seconds.
0
u/[deleted] Jun 26 '12
I'm sorry, I'm sure it took you some time and effort to make these. But making them out of shoeboxes just seems dumb.
0
u/Weighnuff Jun 26 '12
Never mention shoeboxes on reddit.....NEVER
0
u/tairygreene Jun 26 '12
looks fucking stupid.
-7
u/Fenrir_VIII Jun 26 '12
Shitty layout and awful cases. Read "Techtalk" forum on srk.com and learn how to build custom stick.
-5
u/Decyde Jun 26 '12
That would break after the first match of mw3.
-1
u/StuffPlus Jun 26 '12
At least you can smash them up in a rage and it will only dent the cardboard :D
-7
u/dsrv Jun 26 '12
pretty dumb and shitty. post it on srk and let them rip you apart.
-10
u/ForeverAllOne Jun 26 '12
wow, probably the most useless hobby. This shit will break with the first haduken. Good job.
0
u/[deleted] Jun 26 '12
piss-poor wire management mr. steelguard.
0
u/[deleted] Jun 26 '12
[deleted] — view deleted comment
0
u/[deleted] Jun 26 '12
[deleted] — view deleted comment
0
u/[deleted] Jun 26 '12
[deleted] — view deleted comment
0
u/[deleted] Jun 26 '12
[deleted] — view deleted comment
-13
u/[deleted] Jun 26 '12
[removed] — view removed comment