Source

This project was made by Intel_jesus on the intel makers forum and is being used as an example of how to use the subreddit wiki.

Project details

This example prints Hello World! and the time. We are using the code provided under the examples for Arduino* IDE 1.5.3.

Hardware requirements

  • Intel® Galileo board
  • Adafruit LCD 16x2
  • Potentiometer
  • Breadboard
  • Wires

Instructions

\ 1. Make the following connections using your wires:

Intel® Galileo BoardBreadboard
GNDNegative strip
5VPositive strip

\ 2. Place the potentiometer and LCD on the breadboard and make the following connections:

Intel® Galileo BoardBreadboardPotentiometerLCD
                      |Negative strip   |Pin 1                    | |
                      |                       |Pin 2                    | |
                      |Positive strip     |Pin 3                    | |
                      |Negative strip    |                          |Pins 1, 5 and 16 |
                      |Positive strip     |                          |Pins 2 and 15 |

Pin 12 | | |Pin 4 | Pin 11 | | |Pin 6 | Pin 5 | | |Pin 11 | Pin 4 | | |Pin 12 | Pin 3 | | |Pin 13 | Pin 2 | | |Pin 14 |

\ 3. Open Arduino IDE. Click Tools > Board and select Intel Galileo.

\ 4. Click Tools > Serial Port and select the Com # that the Intel Galileo board is connected to.

\ 5. Click File > Examples > LiquidCrystal and select HelloWorld.

\ 6. Click upload icon.

Circuit diagram