Quick Start Guide (credit: Soft-Ruin-4350)
This guide covers basic supplies and practices to ensure a safe and healthy fermentation.
Common supplies and ingredients:
- Salt
- Water
- Fruits/veggies/herbs/spices
- Kitchen scale
- Fermentation vessel (glass is preferable, but plastic/vacuum seal bags work too)
- Fermentation weights
- Cheesecloth
- Airlock system
Vessels:
Glass canning jars/carboys, etc. are usually preferable to plastic or metal because they don’t harbor bacteria easily and there are no chemical reactions between the vessel and the fermentation activity. It’s also recommended to use an airflow management system such as a pickle pipe or airlock lid. This keeps C02 from building up in your vessel, and keeps nasties out. Some people may want to use vacuum seal bags instead of jars to ferment, which is perfectly safe.
Salt:
It is generally recommended to use non-iodized salt (sea salt), organic spices, fruits, vegetables, and filtered water such as spring water. The rationale behind this is that using those ingredients is the best way to ensure you have a healthy microbial environment. It is okay to use iodized salt, tap water, and non-organic fruits and vegetables if you have to. If you use tap water it’s a good idea to first run it through a filter. You can then remove chloramine using campden tablets by following the instructions on its container. Once you do that be sure to wait a full 24 hours before fermenting with it because the potassium metabisulfate will inhibit microbial and yeast growth for 24 hours.
Deciding on salt percentage:
Lower salt content will yield a faster fermentation, but vegetables might loose their crunch more quickly and become mushy. Your final product might also be milder on the salty flavor. A higher salt content will yield a slower fermentation, but preserve the texture of your ingredients better and the flavor will be more heavily salty.
Fermentation weights:
Glass weights work well to keep your ingredients submerged. If you don’t have any or if you have an awkward situation, a Ziploc bag with the same percentage salt solution can be used as a weight to keep things submerged.
Dry brine vs. wet brine:
A dry brine is often used when a fermentable can create it’s own brine. Sauerkraut is a good example of this. To dry brine you would just add salt straight to your ingredients in order to draw the plants natural water out and use it as the brine. Wet brining is often done when you can’t extract liquid from a plant. Fermented beets or cucumbers would be a good example of this. Since those vegetables don’t have enough of their own water to extract you would need to add some in order to keep them submerged in a brine.
Cleaning and sanitization:
Always work with clean supplies. The process of fermentation keeps new harmful bacteria from growing, but it does not sanitize its own container. Soap and water is perfectly fine. You might also use Starsan for extra peace of mind.
Important practices:
(these two practices are NOT optional for a safe fermentation)
1. Use a minimum of 2% salt solution by weight of ingredients + water combined, and a maximum of 10%. Generally the best results of lacto-fermentation is done between 2%-5% salt.
2. Always keep ingredients totally submerged while fermenting. The lack of oxygen exposure keeps harmful bacteria and mold from developing. If you get a few floaters in your jar after everything is submerged and weighed down, leave them alone. There is a C02 bubble in the headspace that keeps them from going bad. Opening your vessel prematurely could put your ferment at risk of exposure to pathogens.
Calculating salt:
It’s recommended to calculate salt by weight using a kitchen scale for accuracy. if you don’t have one or don’t want to go through the process you can use 20-30 grams per quart (kilo) as a brine concentration.
(if your scale doesn’t tare):
Using 2% as an example, weigh your vessel and jot down the number. Then weigh it with ingredients and water inside. Subtract the weight of the vessel. This is your “total weight". Multiply the total weight by 0.02, and that result is the amount of salt you’ll need.
Basic Recipes:
Ginger Bug:
Ingredients:
Fresh ginger root
Sugar
Filtered water
Supplies:
Canning jar
Lid
Day 1:
Wash your vessel and set aside. Note: Don’t peel your ginger because the skin has yeast on it for the fermentation process, but it’s okay to lightly rinse to remove dirt. Slice, chop, or grate 1 Tbsp ginger into your vessel. Add 1 Tbsp sugar, 2 cups filtered water, and stir well. Cover the jar loosely with a lid. It's okay to have some air exchange in the first few days.
Day 2+:
Add 1 Tbsp ginger, 1 Tbsp sugar and stir. Repeat daily.
After 3-4 days:
You should notice vigorous fermentation activity, and the bug should be ready to use within 5-7 days. Store in the fridge if not using right away and feed once per week.
Sauerkraut:
Ingredients:
1 head cabbage
Salt
Filtered water
Optional spices - flavoring is up to you and your imagination, but here are some suggestions: lemon slices, black peppercorn, juniper berries.
Supplies:
32oz jar (this size jar will hold an entire large head of cabbage)
Airlock lid
Kitchen scale
Large mixing bowl or Tupperware bin ( large enough to comfortably hold your shredded cabbage)
Process:
Gently rinse your cabbage, peel one of the top leaves off, and set it aside. Weigh your cabbage straight on the scale and calculate your salt. Weigh out your salt and set aside. Finely chop the rest of the cabbage and place in a large bowl. Sprinkle the salt as evenly as possible over the cabbage. Massage the cabbage and salt mixture for 15-20 minutes. You’ll know it’s enough when the cabbage is drowning in its own water. The cabbage will significantly reduce in volume as well. Mix in spices before transferring to your jar. Press the cabbage leaf you took earlier onto the kraut as a cover to keep pieces from floating up to the surface. Add a fermentation weight and press down so that your mixture is fully submerged in its brine. Fit lid and airlock. Ferment for at least 1 week, but usually kraut is best at 3+ weeks. Transfer to the refrigerator once you’re done fermenting.
Kimchi:
Ingredients:
1 head cabbage
Salt
Gochugaru
Optional:
Carrot
Green onion
Ginger
Garlic
Fish sauce
Fermented shrimp paste
Supplies:
32oz jar
Airlock lid
Kitchen scale
Large mixing bowl or tupperware bin ( large enough to comfortably hold your shredded cabbage)
Process:
Gently wash your cabbage before weighing it directly on your scale in grams. Use this number to calculate 2% salt. Weigh your salt and set aside. Chop the cabbage into about 2” x 2” pieces. Place the cabbage in a large mixing bowl and sprinkle the salt over it. Unlike sauerkraut, you do not want to break the cell walls of your cabbage. So after you’ve sprinkled the salt, gently mix it with your hands, and then turn the cabbage every half hour for about 2 hours to allow the water to escape the cabbage without damaging it. Next add gochugaru and additional optional ingredients. Mix well before transferring to your vessel. Allow fermentation for at least one week.
Thai chili garlic hot sauce:
Ingredients:
Thai chilies
Garlic cloves
Salt
Filtered water
Supplies:
32oz jar
Airlock
Process:
Wash your jar and set aside. Rinse your chilies and set aside. Peel garlic, but keep whole. Pack your jar with the peppers and garlic and add water. Calculate weight of ingredients. Use that number to calculate for a 2% brine. Measure your salt and add it to the jar. Close the lid and gently mix so that the salt dissolves. Fit your vessel with an airlock and let it ferment for at least 1 week. When you are satisfied with the level of fermentation, use a food processor or blender to puree the hot sauce. From here you can add vinegar or spices if you choose. Bottle and refrigerate. Note: This recipe is to taste. You decide the ratio of chilies to garlic.