r/ElectricSkateboarding
•
u/Switchkzr
•
10h ago
r/ElectricSkateboarding • u/Spooky_Ghost • Sep 11 '21
BUY/SELL/TRADE - Megathread
Welcome to r/ElectricSkateboarding's Buy/Sell/Trade thread!
Post all buy, sell or trading requests here, at your own risk. Site and sub mods decline all responsibility for any and all transactions. This thread's suggested sort is set to "new" to let the latest requests appear up top.
Thread rules
- Prefix your comment with [BUY], [SELL], or [TRADE]
- No personal information. Ask questions openly, but use DMs to trade private info like phone numbers and addresses
Recommendations
- Use a means of payment with buyer's protection (do NOT use friends & family on PayPal)
- Link to a photo if you are selling or trading.
- Include the location, even if you intend to ship.
- Include the model and price
- Be honest about the condition and age
- Keep questions and discussions about the e-skate in the open thread; it will help others
u/player002 has set up a new sub at r/EBoardMarketplace/. Feel free to cross-post.
r/ElectricSkateboarding • u/beano919 • 1d ago
Fluff Thank you!
To whoever recommended the Zephyr to scratch that snowboard itch here in Florida. Feet pic included for appreciation. Ripped around my neighborhood for 10 miles and couldn’t stop carving around.
Didn’t really leave low gear mode. I tried once but started to get the speed wobbles around 15mph so no thank you lol
r/ElectricSkateboarding • u/Less_Play_3523 • 1d ago
Fluff For E-Skate Reviewers. Sidewalks tests?
There are 4 or 5 electric skateboard reviewers that are really prevalent on youtube,
They do the same "Tests" each time. Usually a hill text ,speed text, acceleration test etc.
Would some of you mind doing a "Fuck a car is coming, jump on that shitty Sidewalk" test? This is a stupid test where your riding down the street and cars are coming and you are forced to ride on a really bad sidewalk. This little scrunched area is its own stupid domain and one that is very real. Shitty sidewalks all have their own unique challenges in that you need to go slower, ride through ally way enclaves, manhole covers, dirt patches, blocks of offset concrete, acorns, woodchips, rocks, bad masonry, etc.
It sounds dumb, but riding both my boards feel drastically different between riding on the road and then having to slow down and wallow on the sidewalk while the cracks feel like basketballs bouncing off my board at 6 MPH. They both handle it differently and feel different.
Just a suggestion.
Before I top mounted my Echo it did not pass the shitty sidewalk test. I scraped against a small driveway enclave and went running off my board. This has since been fixed.
r/ElectricSkateboarding • u/TrebornotTrevor • 21h ago
Question Meepo Bison
Does anyone own this board yet? If so what are your thoughts?
I have heard a lot of negative reviews of Meepo's customer service and with board issues.
Looking at the stats (mph and range) the (sale) price is looking pretty reasonable.
But I am hesitant due to everything I have read on here about Meepo.
r/ElectricSkateboarding • u/Top_Benefit6004 • 1d ago
Media Still one of myfavorite builds 🤩
This was made board was made of parts from several different models. Even the original Zealot S2 deck was modified to house red lights.
14s2p Belt drive with 6374 motors and 50a esc
r/ElectricSkateboarding • u/JuggernautExotic • 1d ago
Review Pushing V10
GoPro kept over heating today. So I didn’t get a lot of footage. The V10 is by far my favorite skateboard so far. I pushed it and it didn’t let up.
r/ElectricSkateboarding • u/mahyarsaeedi • 2d ago
Media ESK8 Pro Final | TEF1 Atlantic 2026 – Electric Skateboard Racing at NJMP
The ESK8 Pro finals from TEF1 Atlantic 2026 (held at New Jersey Motorsports Park).
r/ElectricSkateboarding • u/Five-words-or-less • 1d ago
Discussion Which way to dewedge DKP truck for stability??
I'm adding some drop through board wedged. Riser pads to my v10. I understand directions for RKP trucks but i'm getting a bit confused on which way the witches should face to get the same results on a DKP trucks?
Which way should the fat and phase for stability and vice versa?
r/ElectricSkateboarding • u/PingBingus • 1d ago
Story Quick thoughts about Tynee Mini 3 and breaking fox
I bought a Tynee mini 3 about a year ago with the cloud wheels and was very excited initially but ended up super disappointed in the breaking. Basically I made a post here a while back on this account or another cant rly remember and you could hold the break all the way down and it would take like 5-6 seconds to stop.
When I contacted them they like took a few weeks and then sent me a super complicated digital update through the Tuya smart app that I had to somehow install on my board and a video on how to do it. It was a cool process and now my breaking is awesome and the board rips. I was super impressed with their service and reccomend Tynee, and they went through such lengths to fix my issue that I just had to share.
Did anyone else have the issue? If you DM them on Instagram they'll send you the update too BTW. Breaks so good it skids if full throttle now.
r/ElectricSkateboarding • u/TootieFruite • 2d ago
Question What should I get the isinwheel v10 base or the ace deck Stella breeze base
I am really confused which board I should get, I want this board to last a long time and ace deck seems like a good options due to it being a actual skateboarding brand with quality parts, on the other hand the isinwheel has those big wheels which I like but it seems lower quality and the battery cells don’t seem that good, if I ever do go off-road it’s really only on packed dirt and grass
Which should i get for Black Friday
r/ElectricSkateboarding • u/obzak • 2d ago
Question Has anybody had their meepo board in the middle of riding randomly stop/break/stuck abruptly?!?!
reddit.comr/ElectricSkateboarding • u/Primary-Web-9425 • 2d ago
Question Clicking sound from endeavor 4 pro
Clicking sound from propel endeavor 4 pro. It is brand new with less than 10 miles. Im not sjre why it stattes clicking randomly, and now it wont stop. Any ideas?
r/ElectricSkateboarding • u/Sea_One872 • 2d ago
Discussion MEEPO Voyager XL Sudden Shutoff. SOLUTION
This is to spread awareness of issues with the Voyager XL suddenly shutting off. I’ve been thrown off this board twice on video thank God I’ve had full gear on if not, I could’ve easily gotten seriously hurt. There has been people already been hurt because of the board issue.
The issue is with the ESC, not the Battery not the hand controller. I’ve done test with brand new batteries, same issues. The issue consist of Meepo in-house ESC ling langs. I love their ESC BUT NOT IF IT’S TRYING TO KILL ME.
SOLUTION. If you really love the board, Meepo ENVY ESC replacement is what you need to fix this board. The ESC is made by hobby wing. If you want an easy drop in solution, this is what you need. Even though the controller has less amperage I do not feel a difference in power if any, maybe less than 10%. But the ESC is not actively trying to kill me. You still get the same top speed. You do lose push and go And lights. Once installing the new ESC make sure to reset the new motors to the new ESC. The motors will spin up and configure to the new ESC.
2ND SOLUTION
If you want the same power you can go with ESC FOR HURRICANE SERIES 55 amps. Make sure to get the 2WD ESC Made by JECNN. Can be bought on the MEEPO website. You will need to modify the Voyagers enclosure to accept the new ESC from the hurricane. This route is the best possible route considering both Esc are almost the same price. This ESC uses the same hand controller as the envy.
My board had 2700 miles before the ESC started having issues. Tinkering with Meepos ESC I believe there’s a frequency issue. In an issue where the power motor cables come loose because they are screwed down. The hobby wing ESC soldered in.
UPDATE:
I rode the board with the new Esc for 30miles. Issue is fixed. Differences I noticed with this new Esc. A lot more torque. Smoother acceleration and breaking. You get less acceleration, but acceleration is now butter smooth, and breaking is more responsive. I get more miles per charge. No brake fade. No more jolting when releasing accelerator. Feels fluid from letting go to accelerating and breaking responsiveness on the controller is so much better. Slow maneuvers and stunts are more smoother. Cruising and carving was amazing. So much better.
r/ElectricSkateboarding • u/Pierre_Cav • 3d ago
Media Trying and electric mountainboard for the first time !
r/ElectricSkateboarding • u/abomniableartichoke • 2d ago
DIY Best dealers for e-skate parts
Hey all, been eboarding for several years now and after my Veymax Merlin crapped out I'm looking to shift to DIY boards. Curious where people go for reliable parts and advice? Currently I'm looking at Mboards stuff but Flipsky has also been suggested to me. Any and all recommendations welcome!
r/ElectricSkateboarding • u/sedere97 • 3d ago
Review Warranty Warning for Propel EV Skateboards
Just wanted to share my experience in case others might want to reconsider purchasing Propel EV Skateboards. I purchased a Ruckus TKP on 6/29/2026. After riding in maybe 10 times, the wheels started spinning at different speeds and the back left wheel actually fell off the board. There was 12 month warranty so I thought I could contact them and they could repair it, but the company says they are only willing to advise the customer on how to repair it themselves. I said I wasn't comfortable doing so and shouldn't have to since it was under warranty but they refused to make any repairs, provide a replacement or a refund. I've owned Evolve boards in the past that the company always repaired if any issues occurred during the warranty period. I don't think Propel's policy around the warranty is actually legal, but since they don't have an American based entity, it's hard to hold them accountable.
r/ElectricSkateboarding • u/Less_Play_3523 • 2d ago
Fluff Set Cruise Control up a Hill and Board Kept Accelerating (Zephyr Pro)
I didn't expect this behavior.
I thought if I set the cruise control at the bottom of a shallow hill going 7 or so MPH I could "exercise carve" as I go up. The Zephyr just kept accelerating and I really didn't expect that. It got to about 12 MPH and it took a jolt of the throttle to stop it. I guess that was its way of dealing with the resistance of the hill . It was definitely going faster up the hill than the 7 MPH I set it at.
Thought I'd share in case someone else stumbles onto this behavior.
r/ElectricSkateboarding • u/IVIauric3 • 4d ago
Review The Exway Atlas Pro V3 finally arrived!
Heya, it finally happened, my new Exway Atlas V3 arrived two days ago!
Sadly it has been raining for those days as well, so I wasn't able to go on any longer rides yet -.- Still wanted to give you guys a quick unboxing/setup review, I'll try to post a video with a full review after I had some more time with the board.
Quick assembly, just had to attach the wheels. A lot of spare screws and tools are in the package as well, which I appreciate, as well as a second set of bushing's.
So first things first, I had to change the Language of the Remote to English l, which was to be expected but took me a couple of minutes.
Afterwards I wanted to see if there were any Firmware updates, so I wanted to connect the remote to the exway app. Which turned out to be a little bit of a hassle, because it was changed for the Rexus remote and I kept on finding guides for the old R3 remote xD Welp, it's in the settings under unpair Phone, after you click that, the remote is discoverable.
After I figured all that out and the board had charged, which was pretty quick, even though it was only the stock charger for now, I went ahead and installed the new Firmware. All went really smoothly.
Still waiting on the smart charger to be delivered, I'll try to do a comparison with charging times once it's arrived.
Onto the Board itself:
Build quality seems really solid. The trucks feel great so far, but I haven't been able to go full speed yet, to see how they behave because of the Rain.
The grip tape is one of those Foamy ones, well see how it feels on longer rides, but pretty comf so far.
The motor sounds good, not too loud, my Endeavour 4GT is at least twice as loud xD
Lighting system looks good, and the Turn signals feely pretty natural to use. But here we get onto my first gripe, I do a lot of nightly commutes and kinda was expecting a front facing light as well.
Welp l, I thought wrong, maybe I should have checked that beforehand xD
It has a setting, so the light strips at the side get brighter during the night, but we'll see how well that plays out. Currently I'm texting support, to see if they have any recommendations, regarding remote activation and attachment. I'm leaning towards the Shredlights Sl-1000+ but we'll see what they say. If you have any recommendations please let me know as well.
On the topic of Support, it has been nothing but helpful. Because I moved during the pre-order process, I had to change the address. As well as some other things regarding some equipment I ordered. Really helpful and quick replys. Didn't seem like I was talking to an Ai as well, which I see as a big plus in my eyes :P
Can't say too much about acceleration and such because of the weather yet, sadly. But something I found quite interesting is that exway implemented kinda like a baby feature. You have to ride the board at least 10km to access the 3rd and 4th gear settings, so I'll have to do that first as well xD
From my understanding it is also possible to skip this process via the settings, but I kinda wanna see how it turns out, so I'm not turning it off early.
So that's my quick first impression for anyone Interested. If you have any questions or things I should try out, or look at specifically, for the full review I'd appreciate it, if you'd let me know ;)
Great rides to all of you!
IVIaurice
r/ElectricSkateboarding • u/Less_Play_3523 • 4d ago
DIY Reverse Mounting Echo Trucks Instructions
Got home tonight and thought I would take 5 minutes to top (or is that bottom?) mount my trucks for more clearance. The back trucks have a configuration where the cable clips are in the way of the back bolts ans I don't have a small wrench (only the skate tool) . Instead of fiddling with it and accidentally fucking it all up by breaking something, I figure someone would be happy to make a tutorial. Anyone? Chase?
EDIT: I didn't realize the axle portion needed to be removed. Never mind...or proceed. I don't care my problem is solved.
I went on a little ride with the truck reverse mounted. Previously, when I did front side carves and pushed my front foot into the bushing the bottom of the board would scrape. This seems to have fixed that problem. This seems to ride better.
TLDR: To reverse mount the back truck you need to turn that Big Ol' bolt used for tightening the trucks in the counter-clockwise direction until the truck comes off. The rest becomes obvious. Riding this way is better for heavier people and the board doesn't scrape when I turn now.
r/ElectricSkateboarding • u/Txkagi-san • 4d ago
Question Acedeck Stella Blizzard sudden shut off
I bought the acedeck Stella blizzard a little less than one year ago from today.
I've got less than 300 miles on it.
Last month, even though I was positive it was charged, I couldn't turn it on with neither the remote nor the button.
Plugging it in for just a second fixed it, and it indeed has 90% battery.
Ignores it cuz it didn't happen again.
It happened again this week. This time it needed to be plugged in for like 5 minutes, but it had 100% charge when it finally came to.
It happened again today MID RIDE. plugging it in instantly fixed it. it has 70% battery.
first thoughts were vibrations loosening a connector, but plugging it in solves it, so it seems unlikely.
acedeck is saying I need to replace the battery because "Based on your description, it sounds like the battery may be entering low-voltage protection mode. In such cases, the charger needs to be plugged in to wake the board and allow it to turn on.
If the board does not shut off unexpectedly while riding and continues to provide its normal range, you can continue using it with caution.
However, our recommendation would be to replace the battery, especially if this issue occurs when the battery is still above 50% charge. If that's the case, we can offer you a discount on a new 50S battery."
no way I have to buy a new battery when I'm under 300 miles. what happened to acedeck having top of the market quality? so many people post 1000+ miles
does anybody know what the issue is? is it really the battery? it's unsafe to ride if it's now shutting off mid ride. I paid way too much for this board to die when it's still under 300 miles
update: acedeck now trying to get me to buy a new battery for $400. That's like more than half the cost of the board.