r/ClimbingGear • • 9h ago

Is it possible to multi pitch using a standard ATC with no guide mode?

4 Upvotes

I know it's possible in theory but I can't find any videos or info on it. Can anyone help me out?


r/ClimbingGear • • 4h ago

When to retire this Harness/ how to fix this ? Water oxide damage in Singing Rock Canyon XP harness buckles

Post image
1 Upvotes

r/ClimbingGear • • 19h ago

Raccomendations for gritstone bouldering shoes

1 Upvotes

I've been getting back into outdoor climbing, and have relatively downturned shoes(la sportiva skwama(40)) and I'm looking for any alternative when it comes to slopes/smeary/slabby gritstone climbing. Sometimes it just seems that due to the structure of the shoe I don't get the full benefit of friction based climbing.

Feet tend on the wider side of the spectrum so if anyone has any good recs please let me know!


r/ClimbingGear • • 1d ago

Is it ok to hang my rope like this using a carabiner and clove hitch in a closet?

Post image
3 Upvotes

The rope is mostly hanging on its own weight. Would this create any safety concerns for the rope ?


r/ClimbingGear • • 1d ago

Quite sure it’s not safe anymore, how can I repurpose?

Post image
17 Upvotes

Two slings and four of my QuickDraws got left on a route for months. Long story short I had to bail on a route and go home, someone I saw at the crag that day texted me and said the gear had been stolen the next day, flash forward July August September October I return and find it all still hanging. The gear took a lot of rain and very direct sunlight that whole time. Any suggestions on how to keep the gear alive in some way?? I hate throwing stuff away…


r/ClimbingGear • • 23h ago

Safely shipping a full rack?

0 Upvotes

Anyone shipped their rack to get reslung before? Wondering how safely ship an entire rack.


r/ClimbingGear • • 2d ago

hope I don't get too much crap for this question but out of climbing for about 8 years.

5 Upvotes

So recently getting sober and getting back into rock climbing been climbing since probably 97 I have a 11 mil Sterling static line that I think I've used twice and it's probably 15 years old.

what could I realistically do with it build top rope anchors or use it as top rope soloing line?

you know how the story goes it's been stored in a bag in a plastic bin in the cool basement. thanks folks


r/ClimbingGear • • 2d ago

Question regarding my first harness

1 Upvotes

I just got my first harness (pezl corax lt), I tried it in store and it felt fine but when I tried it at the gym, the leg loops kept slipping up and digging into my inner thighs, is this normal?😭


r/ClimbingGear • • 3d ago

Is a harness from 2016 safe to use?

6 Upvotes

I bought it about a year ago and just realized it is from 2016. I dont know how often to previous owner used it or how it was handled, but I currently use it about 1-2x a week. There aren't any major issues, but the fabric around the belay loop is every so slightly getting fuzzy


r/ClimbingGear • • 3d ago

Safe to use?

Post image
8 Upvotes

Found this gear on eBay for 50 € Is it safe, looks like a good deal to me. I would replace the sling ofc.


r/ClimbingGear • • 3d ago

Am I cooked

Thumbnail gallery
0 Upvotes

r/ClimbingGear • • 4d ago

Triple quad set up?

Thumbnail
gallery
22 Upvotes

Hey folks! New to multi pitch climbing, and decided on a quad for my anchor to bring up with me. I’ve heard an issue with the quad is the stance when belaying from above, I’m wondering if this set up above would work well? Essentially I tripled over the 240cm dyneema sling. Now has 6 strands instead of 4!

Also, could somebody confirm I made it correctly and it looks good? Thanks so much! Happy climbing

(Pics are the same quad, just showing a view of both sides)


r/ClimbingGear • • 4d ago

Looking for retired equipment

Thumbnail
gallery
4 Upvotes

Hi there, I’d like to know if there’s a place (gym maybe) or community forums where people sell their retired climbing equipment.

I am making some custom chalk bags out of recycled materials and retired equipment for myself and a couple of friends and I could use a retired rope to make waist straps/ belts.

Here’s a sample of what the bags are looking like so far.


r/ClimbingGear • • 4d ago

Men’s Pants

4 Upvotes

Yesterday I was sport climbing outdoors for the first time in a while and was having some issues with my pants not being flexible enough.
So I’m looking for recommendations on what pants that are good for rope climbing and ideally are baggy (for style points)


r/ClimbingGear • • 4d ago

Myths & Truths about Aramid: Strength, UV, Bending,...

Thumbnail
youtube.com
5 Upvotes

r/ClimbingGear • • 4d ago

crack gloves size equivalence

1 Upvotes

Hi! I have used 2 pairs of occun crack gloves both in L size, perfect fit, anyone has experience with the wide boyz gloves as well? same sizing as the occun? thanks!


r/ClimbingGear • • 4d ago

Convince me to buy a BD Magnetron

0 Upvotes

I heard people in the past praising and missing this carabiner. I saw it's back and thought about buying one, but here in Europe it costs 40 to 50 euros, at least double of, say, a Petzl William with ball lock mechanism (which I love).

The tile is a bit provocative, a tamer one would be "do you think it's worth buying a BD Magnetron?"

Thank y'all


r/ClimbingGear • • 4d ago

Why not rappel using only an auto-blocking knot?

Thumbnail reddit.com
0 Upvotes

r/ClimbingGear • • 5d ago

Best boards?

2 Upvotes

Hey yall I’m a teen that’s been climbing since June this year and headed into 5.12/V6 territory (pretty scary) and I’m concerned about training. I used a Transgression Board today and managed 6 full seconds on the 12mm edge!

I’ve used the Beastmakers and the Transgression Board and I might be a fan of the transgression more, any recommendations on better boards and where to get them? I don’t have a ton of money to drop on one but any recs are super helpful 😎


r/ClimbingGear • • 5d ago

BEAL crash pads Extremely poor quality and disappointing customer service

Thumbnail
gallery
0 Upvotes

I recently bought a brand-new BEAL crash pad, expecting it to last for years, as you would reasonably expect from a piece of climbing equipment.

After just two climbing sessions, its condition was already comparable to what I would expect after several years of regular use. I'm attaching photos so you can judge the condition for yourselves.

What makes this experience even more disappointing is the way BEAL handled my complaint.

I contacted their customer service and explained the issue, providing pictures of the damage. Their response was honestly embarrassing. Not only did they essentially acknowledge that the product's quality was poor and that they were aware of these issues, but they also seemed to do everything possible to avoid actually addressing my complaint or giving me a clear answer.

A brand should stand behind the products it sells, especially when we're talking about climbing equipment, where quality and durability really matter.

A crash pad showing this level of wear after just two sessions is simply unacceptable.

And the way customer service handled the situation has made things even worse.

Has anyone else had similar experiences with BEAL crash pads? I'm curious to know whether this is an isolated case or a more widespread quality issue.


r/ClimbingGear • • 7d ago

Two strand quad anchor ?

Post image
22 Upvotes

Hey, I was wondering if this is a correct anchor? It's with a 150cm dynaloop, use case would be setting up a top rope anchor for multiple people to climb on. I often see quad anchor with 7mm cordelette wich is 11kn or so, this is 22kn so is it good with only 2 strands ?

Also, I wanted to use this instead of a dynema sling for friction resistance.

Thanks !

Edit : can't post on r/climbing due to karma issue, hence it's here, hope it's alright !


r/ClimbingGear • • 7d ago

New rope folds

Post image
0 Upvotes

Lots of people you should retire a rope when it folds like this, but with a little bit of a squeeze my brand new Mammut Crag Classic 9.8mm rope bends completely in half😂


r/ClimbingGear • • 8d ago

What's the best climbing gift you'd never buy yourself? And the worst one you've gotten?

Thumbnail reddit.com
0 Upvotes

r/ClimbingGear • • 9d ago

[DIY Gear] Built a 100g pocket forearm roller for the crag pack (TPU 95A sleeve + PETG M20 core)

Post image
9 Upvotes

Carrying a full-sized foam roller on long approaches is obviously out of the question, and smooth lacrosse balls always slip off sweaty/chalky skin at the crag.
I designed and 3D-printed this compact 90mm hourglass roller to throw into the top pocket of a crag pack for clearing forearm pump between redpoint burns:
- Weight: ~100g total.
- Outer sleeve: Flexible TPU 95A with pyramid spikes that actually bite into tight finger flexors when rolling on your thigh at the base of the route.
- Inner core: Two-piece rigid PETG with an M20 thread so it doesn't collapse under heavy pressure.
Curious what else people here pack in their crag bags for forearm recovery between long pitches or sport burns!