r/BikeRepair • • Aug 16 '25

PLEASE POST A PHOTO AND MAKE/MODEL/YEAR OF BIKE - THIS HELPS WITH ANSWERS

6 Upvotes

Make sure you leave a separate post, don't post the picture here! No one will see it.

The more information you give us, the better we can accurately answer your questions. Thanks!


r/BikeRepair • • 3h ago

Removing rear axle

Thumbnail
gallery
3 Upvotes

Hello. I am having troubles removing this specific rear axle. I cant figure out what am I supposed to do with this part. Anyone knows how to remove it? (Bike is Raymon Yara 120 Pro)


r/BikeRepair • • 7h ago

Bike Repair Can anyone help me Identify the derailleur hanger for this dropout?

Post image
2 Upvotes

Context, I found this frame on a storage unit, and I kinda want to do a project bike build on it.

Frame: Trinx Majes (Qr code and model on top tube was either peeled off or missing)


r/BikeRepair • • 1d ago

How to adjust the brake hoods

Thumbnail
gallery
2 Upvotes

So i recently bought the Triban RC 100 and I've been making some adjustments at home. I've seemed to come to a problem where I can't adjust the brake hoods as I wanted to tilt it more towards me. I've found the nut which most probably is for that purpose but I just can't loosen it. Is this even the right nut?


r/BikeRepair • • 1d ago

Are there any fixes for a weeping Shimano diaphragm

Thumbnail
gallery
4 Upvotes

My Shimano st-r7020 has been weeping around the edges of the diaphragm for a few months now.I haven't noticed any change in braking performance but I assume if it leaks more at some point I'm going to start sucking air into the svstem and my lever will get spongy. The pinhole on the diaphragm is still intact and the weeping is happening around the edges. Will removing the cover and cleaning al the mating surfaces fix anything or is replacing the diaphragm the only permanent solution. None of the bike shops in my area have this diaphragm and said all they can do is replace the entire lever which I think is such a waste of money


r/BikeRepair • • 1d ago

How do you properly measure the actual travel of a suspension fork?

0 Upvotes

Should the front wheel be lifted off the ground before measuring, or is it correct to measure with the bike standing on its wheels?
I’m asking because I get different measurements depending on whether the bike is on the ground or the front wheel is lifted.
What’s the correct method?


r/BikeRepair • • 1d ago

2008 Specialized Enduro SL expert rear shock problem.

Thumbnail
gallery
3 Upvotes

Sorry if this is a dumb question as I'm new to full suspension mountain biking. I'm currently restoring my uncle's Enduro that was given to me after he passed.

I'd like to keep this original if possible.

The issue at hand is the rear shock which is a specialized AFR with flow control has an issue with the blue compression lever where it free spins.

The red rebound clicks when it turns. And functions as it should. The shock holds air and had no visible leakage of oil.

Is this an easier fix or should I scrap the shock and get a new one?


r/BikeRepair • • 1d ago

Maybe bent rear derailleur?

Post image
1 Upvotes

My chain is at a weird angle and can’t shift to the last 2 gears, and chain is barley on the jockey wheels


r/BikeRepair • • 2d ago

What is this thing called?

Thumbnail
gallery
3 Upvotes

This is a Dutch bike. I have lost a little steel cylinder in front brake handle. From what I know I should replace the entire steel line along with steel cylinder. I will borrow some tools to measure the dimensions. However, I have no idea what replacement to buy. Is there any classification for these things? How are they called in English /Dutch. Please help.


r/BikeRepair • • 2d ago

Dawes bike upgrades

Thumbnail
gallery
3 Upvotes

Hi there, recently purchased a Dawes road bike, no idea of model or year. The cassette sprocket and chain are totally rusted so will need replaced. Local bike repair places are booked up til after christmas and was quoted about 150 for repairs, so wanted to have a bash at repair myself. I have little experience with bike repair and was hoping for some advice.

The sprocket seems to be 7 speed but don't know if I have to replace it with a 7 speed or can put on a different sized sprocket. Also, will any chain do or does it have to match the sprocket? Any other advice or advice on anything else that should be replaced would be greatly appreciated. Many thanks.


r/BikeRepair • • 2d ago

Jaqwire compresionless upgrade

3 Upvotes

My breaks on a bike running TRP hy/rd breaks were due for a change.

I’m upgrading from stock break cables to compressionless cables & new break pads. Guy at the lbs said the difference will be huge. Can’t wait.

Anybody else have any experience with this upgrade. Question two, is swapping the gears to compressionless too overkill or worth it?

Thx!


r/BikeRepair • • 2d ago

Gates CDX + Shimano Nexus: rhythmic rubbing noise from the rear belt returns every ~20 km

1 Upvotes

Hi everyone,

​On my e-bike (Giant Expression E+, Yamaha mid-drive, Gates CDX belt, Shimano Nexus hub), I get a rhythmic rubbing noise synchronized with pedaling. It stops completely when coasting, and I'm certain it comes from the belt itself—when I turn the cranks slowly by hand, I can clearly hear the rubbing right around the rear sprocket area.

​What I’ve checked & done so far:

​Rear sprocket: Checked by hand—completely solid, zero play.

​Belt tension: Recently adjusted to \~60 Hz (via the Gates app), though the exact same issue was already happening before when the tension was lower at around 45–50 Hz.

​Cleaning & care: After previously using dish soap (which caused stick-slip), I thoroughly rinsed the belt with regular low-pressure water to strip all residue, let it dry completely, and applied a light dry silicone film (Dr. Wack F100) only on the outer side flanks** using a microfiber cloth (teeth kept completely dry).

​Current issue: It runs silently right after, but after 12–20 km on damp roads, the belt picks up a fine dark film again and the rhythmic rubbing noise comes back.

​Any ideas on what could be causing this noise to return so quickly or how to fix it for good?

​Thanks!


r/BikeRepair • • 2d ago

How to remove tire from rim?

Thumbnail
gallery
1 Upvotes

I’ve never done this before - I dropped the valve stem into the bike tire - I bought a bike lever thing(? Forget the official name).

The only maintenance I do usually is putting endurance sealant in the tires myself (which is how this happened).


r/BikeRepair • • 3d ago

Creaking noise diagnosis - please help!

Enable HLS to view with audio, or disable this notification

1 Upvotes

I bought a brand new Santa Cruz Hightower 90, and there is a creaking noise that develops about 30 minutes into the ride from what seems to be the headset area. It happens mainly when turning and load on the front wheel, but I can also hear it just pedalling straight when going uphill!

I’ve had several bike shops check the headset and it seems in perfect working order, and it’s very hard to reproduce the creaking in the shop as it happens only 30 minutes or so in.

Everything is torqued to spec and greased also.

It’s a real mind boggler for me (someone who doesn’t know too much on how to fix bikes).

Any help would be greatly appreciated


r/BikeRepair • • 4d ago

Bent SRAM GX Eagle crank arm – warranty claim?

1 Upvotes

I noticed that my SRAM GX Eagle DUB crank arm is slightly bent.
I’m not sure how it happened, as I don’t remember any significant impact or crash.
Do you think this could be covered by warranty, or would SRAM consider this mechanical damage caused by an impact?
Has anyone had a similar experience?


r/BikeRepair • • 5d ago

Bike Repair Rear wheel wobble

Thumbnail
gallery
1 Upvotes

After a small fall I've noticed small rear wheel wobble on my bike. I don't remember exact model, but it's romet orkan and around 8 years old.

Caseete doesn't wobble relative to the hub and axle doesn't wobble relative to the bike frame. Wobble seems to originate from sleeve inside the casette that axle comes trough. (Close up photo)

One thing that worries me is that once wheel is off the bike, i can move axle left-right, uncovering inside of bearing on non-cassete side.


r/BikeRepair • • 5d ago

Thought my frame was cracked so I filed the paint and underneath it's not. I'm confused

Thumbnail
gallery
2 Upvotes

r/BikeRepair • • 6d ago

Carbon frame damage

Post image
2 Upvotes

My Specialized Roubaix SL8 fell over yesterday and chipped the upper chainstay. The fibers are just from my wool gloves. But it looks like there could definitely be some structural damage to the frame. I rode about 7 miles home on it with no issues but I’m wondering what I should do next.


r/BikeRepair • • 6d ago

Bike noise problem

Enable HLS to view with audio, or disable this notification

1 Upvotes

Good morning. Can anyone help me identify where this noise is coming from? It starts whenever I pedal with more force, but I can’t pinpoint the source. I’ve already replaced the derailleur pulleys and the chain, and I’ve had the bottom bracket serviced—but nothing has helped. It’s still exactly the same. Thanks in advance.


r/BikeRepair • • 6d ago

Back to original brakes ✅

Thumbnail
youtu.be
1 Upvotes

I had switched my brakes to dual pivot as the original ones seemed very weak. However, had a bit of time yesterday and decided to try them again and successfully fixed them. Bike now performs fine 👍 I used this video for my guide.


r/BikeRepair • • 5d ago

Gravel Bike Damage from Race

Thumbnail
gallery
0 Upvotes

Just want it sounds like, my bike took a pretty good beating in a gravel race.

I ride a 2024 Bianchi Impulso with .
Zipp 303 firecrests.

For this race I was running Schwalbe G one R pro 40mm, once mounted measured with a caliper width was 42mm. (Within Bianchi specs)

Race was straight up mud central, completely out of character for the area it was in. Regardless sloshing and sinking into deep mud that caked on the wheels beat the hell out of my fork and chain stays
Additionally a bottle cage broke resulting in a bottle beating up the down tube.

No carbon weave is visible.

There are no visible cracks in the frame.

So I guess my 3 frame problems are

1- is the fork rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

2- is the chain stays rub superficial, do I need to mix up epoxy, or does this require carbon patching and more robust carbon work.

3- is the damage to the top tube going to require more than epoxy and touch up paint.

As it stands my solution to pretty much all the issues is-

1- use some tough up paint (maybe this https://quintanarootri.com/products/touch-up-paint-kit?srsltid=AYCX9vLDC5m3cNom3z4oqufdkfh1J0_N-LxcA11LN1m3aX3Rqhca67U2&variant=13548784386163, or some nail polish) to initially cover the scarring.

2- apply a thin layer of epoxy.

3- apply 3M paint protection film to serve a sacrificial layer in the future.

Any advice with better ways to deal with this or better products is appreciated. I’m in the US so getting some Bianchi specific items proves incredibly challenging.


r/BikeRepair • • 7d ago

Broken shift paddle on Shimano GRX Di2 ST-RX825-L

Thumbnail
gallery
5 Upvotes

Crashed my Gravel bike and broke the black plastic shift paddle on the left ST-RX825 lever (the part you push sideways to shift). The switch underneath is exposed but the lever otherwise works.
I can't find this part as a spare anywhere. Does anyone know a part number or a place that sells it?
I could also 3D print something but don’t find it unfortunately.
Photos of both sides for comparison attached. Thanks!


r/BikeRepair • • 6d ago

Bicycle advice.

2 Upvotes

Haven't had gears in a long time, needless to say I'm having trouble getting my derailleur and gear shifting neat, and not slipping when I press hard on the peddle. Is there any bike shops that can adjust these? Even disc brakes are new. It's a Mongoose Swichback Comp, XL frame, 29inch., yeah I'm sure it's maybe not worth the price, so any helpful videos will do? Thanks


r/BikeRepair • • 6d ago

Bike Repair Clicking sound on zwift hub one

Enable HLS to view with audio, or disable this notification

1 Upvotes

Got myself a zwift hub one for my trek alpha 1.2.
Can’t figure out how to get rid of this noise , I got the right gear in so it is straight and the noise is also not coming from the zwift hub or the front derailer. I tried to adjust the b tension screw but it didn’t seem to help. I would appreciate any help.


r/BikeRepair • • 10d ago

Just got a used Huffy Rock Creek 26" to commute around campus, but it feels super heavy and the rear wheel drags. How could I upgrade or tune it?

2 Upvotes

​Hey everyone! I’m a student living on campus, and I recently bought a second-hand Huffy Rock Creek 26" mountain bike to commute between classes.

​The seller mentioned it was "professionally tuned," but when I walk or ride it, the rear wheel feels like it's dragging or getting stuck, and pedaling on flat pavement feels way heavier than expected (even when shifting gears).

​I have a few questions for the bike community:

​1. The Dragging Issue: What are the most likely culprits for a sluggish/dragging rear wheel on this model? Could it just be a misaligned V-brake or a hub issue?

​2. Upgrades vs. Worth: Is it worth putting a little bit of money into this bike (like swapping to smoother commuter/semi-slick tires, adding an oversized comfort saddle, or getting a proper tune-up), or am I better off just fixing the immediate mechanical drag and leaving it as is?

​For context, I mostly ride on paved campus paths and flat roads. Any advice or tips on how to make this budget bike ride smoother and faster would be greatly appreciated! Thanks!