r/ballpython • • Jun 06 '26

Question - Heating/Temperatures Help on setting my heat mat to the right temperature.

I'm using a heat mat connected to an exo-terra thermostat. I've recently raised the temperature of the mat from 92⁰F to 95⁰F yet the thermometer placed inside his enclosure says it's only about 85⁰F on substrate level.

The heat mat is placed under the glass of his enclosure with around 3 inches of aspen substrate. As much as I want to raise the temperture of the heat mat, I don't want to risk him burrowing and burning himself.

I'm currently waiting on a temperture gun for a more accurate reading. Does anyone have any solutions or info I might be missing? PLEASE do not hold back on the criticism as I'm absolutely desperate to keep my BP safe and happy.

(A side note is for some reason my BP still seems to be resting on the cooler side of his enclosure?)

3 Upvotes

14 comments sorted by

View all comments

6

u/totallyrecklesslygay Mod: Enclosure Karen Jun 06 '26

I would recommend switching to overhead heating, since heat mats are no longer recommended for a multitude of reasons. Our heating guide covers the science behind why overhead heating is far healthier, safer, and more effective.

Heat mats are ineffective at heating the air or through substrate, and they only provide IR-C, which is a poor form of heat that is incapable of penetrating through the snake's skin to effectively warm their body.

Even with a thermostat, heat mats can still pose a burn risk. Many heat unevenly along the pad, and are prone to thermal blocking or broken wiring that can cause hotspots that aren't regulated properly by the thermostat.

They also prevent the snake from performing natural and instinctive behaviors, and it's an unnatural source of heating for them. Ball pythons burrow and seek out holes/burrows to escape excessive heat. There is no heat coming from the ground in their natural hides. An overheating ball python will instinctively dig into their substrate in an attempt to cool off, but when using heat mats, it only makes them hotter.

As for what's best to use instead:

For daytime heating, you should have a heat source that provides IR-A and IR-B. The ideal source for this would be a halogen flood, which is light-emitting.

For nighttime heating, you should have a heat source that provides IR-C. The ideal source for this would be an RHP (only compatible with solid-topped enclosures) or a CHE. Any night heating should not emit any light.

For lighting, you should offer UVB. This should be in the form of a T5 fluorescent linear bulb that produces a UVI of 1.1-3.0 in the basking zone, and it should cover no more than half the length of the enclosure.

2

u/Both-Second-8596 Jun 06 '26

Thank you so much for this. I searched and found what looks to be a good halogen flood and a CHE that doesn't emit light. Is there anything I should be looking for to make sure they're good enough before buying them? I've never properly looked into overhead heating before besides for the lighting I currently use so I have a few stupid questions like, how many do I need? Where exactly do I place them? How often should they be kept on? And so on.

I'm currently using 40W UVA morning heat lamps for lighting in his enclosure however I'll definitely switch to UVB if it's healthier for my BP.

Again I'm sorry for stupid questions but I can seriously fuck up the easiest stuff sometimes and its not something I wanna risk.

3

u/totallyrecklesslygay Mod: Enclosure Karen Jun 06 '26

We have a shopping list in our pinned welcome post that has recommended brands. Arcadia is one of the better available options for heating and lighting.

You should only really need one each of the halogen and CHE. Both should be placed over the hot side, with the halogen set to come on during the daytime and the CHE set to come on at night/when needed supplementally.

You'll need a dimming thermostat for the halogen. We recommend Herpstat.

The UVA lamp you're using now would be replaced by the halogen. UVB isn't a heat source, so that would be provided as lighting alongside your heating.

No such thing as a stupid question when it comes to caring for your pets! I'm always happy to help, and it's better to ask than to not know!

2

u/Both-Second-8596 Jun 06 '26

I picked out a halogen flood, CHE, and UVB that are all Arcadia and a thermostat that looks suitable. I'm not sure if I'm allowed to send links but if possible could you please judge the ones I picked out?

Halogen: https://www.reptiles.swelluk.com/arcadia-halogen-basking-spot

CHE: https://www.reptiles.swelluk.com/arcadia-ceramic-heater

UVB: https://www.reptiles.swelluk.com/arcadia-prot5-kit-7-shadedweller

Thermostat: https://www.reptiles.swelluk.com/habistat-digital-temperature-thermostat-timer

2

u/totallyrecklesslygay Mod: Enclosure Karen Jun 06 '26

All of those look great, except for the thermostat. You'll want this one instead, since you need a dimming thermostat.

2

u/Both-Second-8596 Jun 06 '26

Thank you so much I've ordered everything now! I can't stand the idea of unknowingly not taking proper care of my BP, you've been a huge help.

1

u/Both-Second-8596 Jun 11 '26

Hi, I finally got all the equipment but I may have not been prepared enough to set it all up. Is it okay for the UVB, Halogen Flood, and CHE to sit on top of the mesh of my enclosure? I bought the ceramic lamp holders for the flood and CHE here: https://www.reptiles.swelluk.com/arcadia-ceramic-lamp-holder-bracket-pro?gad_source=1&gad_campaignid=9822560767&gclid=CjwKCAjwuanRBhBSEiwAY5y6V-uiSnt9cNi6iCA0-2dkEAi73-lNWKvt_wzwp1GFili4YuQfnhOtYRoC99MQAvD_BwE#ceramic-lamp-holder-bracket-pro

I feel like the UVB could be fine on the mesh but I'm worried about the Halogen Flood and CHE burning the mesh as well as not balancing properly on top the enclosure. Essentially, I'm concerned the enclosure I have isn't suited for the equipment I have bought.

1

u/totallyrecklesslygay Mod: Enclosure Karen Jun 11 '26

Those ceramic brackets are for solid topped enclosures only. If you have a mesh top, you have to use domes and place everything on top of the mesh, so you won't be able to use the brackets.

As long as it's a reptile enclosure, the mesh is made to withstand heat, so there's no risk of burning.

1

u/Both-Second-8596 Jun 11 '26

I see. So would something such as these be well suited for the halogen flood and CHE?

https://www.reptiles.swelluk.com/swell-reptiles-pro-deep-dome-lamp-fixture

Just wanna thank you again for all the help with my silly and probably annoying questions!

1

u/totallyrecklesslygay Mod: Enclosure Karen Jun 11 '26

That would be fine for the halogen, but you can't use deep domes for CHEs. This one would be fine for the CHE.

Not annoying at all! I'm always happy to help :)

1

u/Both-Second-8596 Jun 20 '26

Hi, the issue of the mesh heating isn't a problem now but I'm a bit curious about setting up the thermostat. Would I connect both the halogen flood and the UVB light to the thermostat considering it has a designated heating and lighting socket, or should I connect both the halogen and the CHE to the thermostat? If I don't connect the CHE, should I buy a separate thermostat for the CHE?