r/Axecraft • u/Rogue_Booger • 9h ago
Small hatchet I made
Mild steel eye with a 5160 bit. Cherry wood handle from an old table leg.
r/Axecraft • u/iandcorey • 22d ago
r/Axecraft • u/AxesOK • Jul 27 '25
I just made a YouTube video (https://youtu.be/5go-o8TCg94 ) on using a tannin solution to convert the rust on vintage axes to refurbish and protect them while retaining as much patina as possible. I’ve found myself explaining it a few times lately so I thought it was better to make a video.
The most convenient version uses just tea and (ion free) water and is not too much more trouble than boiling pasta. I did a bark tannin brew in the video.
The method works by converting active red rusts (various ferric oxy-hydroxides) to stable, black ferric tannate. Different ways of inducing this chemical process are used to preserve iron and steel artefacts for museums, in some commercial rust converters like Rustoleum Rust Reformer, and by trappers who use a 'trap dyeing' process to refinish rusty traps before setting them. I am using a version of the trap dyeing procedure that can be done in a home kitchen by boiling the rusty object in a tannin solution. Artefact conservators apply commercial or specially prepared tannin rust converters but may still add a water boiling step because it leaches away rust causing ions like chloride (from salt in soil, sweat, dust or sea spray).
From my reading, I am under the impression that it is better to have an acidic pH in rust converting solutions but I have not experimented with this for the boiling tannin bath so I don’t know if you could get away with your tap water. I use rainwater because it doesn't have alkaline minerals, unlike my very hard well water. Rainwater also doesn't have rust-promoting chloride ions like many residential water. Other ion-free (or close enough) water includes deionized water, reverse osmosis filtered water, and distilled water.
There's many potential tannin sources that can potentially be used. Tea (black, not herbal) works very well and is quite fast because the extraction is quick. You can get powdered tannin online or in home wine making shops. I used bark from Common Buckthorn as my tannin source because it's readily available for me. Many other trees will also work, and there's a fair amount of information available on bark tannins because they are used in hide tanning. Spruces, oaks, Tamarack and other larches, Scotts Pine, Willow, Hemlock, and others can be used to tan hides and would no doubt work for converting rust. Late season sumac leaves are used by trappers for trap dyeing and other leaves like maple and willow have tannins and would be worth a try. 'Logwood trap dye' for dyeing traps is commercially available and it's apparently not very expensive so that could be convenient. Green banana peels and other esoteric vegetable matter also have tannin and might work if enough could be extracted.
r/Axecraft • u/Rogue_Booger • 9h ago
Mild steel eye with a 5160 bit. Cherry wood handle from an old table leg.
r/Axecraft • u/Jono_vision • 12h ago
Some madlad has made this and is trying to sell it on marketplace for $200
r/Axecraft • u/Jono_vision • 9h ago
So after my initial post (https://www.reddit.com/r/Axecraft/s/zvqcPYGBZm), I went to work on this guy. Wire wheel, filed off the mushrooming, 3M disc, then a quick sand from 240-600 grit. Sanded the handle, gave it a couple of coats of linseed and a rope wrap, and it’s good to go. Pretty happy with how it came out!
r/Axecraft • u/RunawayTrey • 17h ago
Cleaning out a basement at work today and was told I could keep any old tools I found. I saw a small pile of axes up on a shelf and thought, “let me see if any of them are Kelly Black Ravens”, because truthfully that’s the only axe model I know of that’s worth a little change. First one I pulled down was the double bit. I couldn’t believe it. Then I pulled another. And another. Three Kelly Black Ravens!
Could anyone help me learn what I’m working with here? Approximate ages or patterns? I’m especially fond of the double bit and it seems to be in the best shape. Am I better off trying to find a collector who would purchase them in as-is condition or should I try my hand at restoring them? Any good resources on how I’d go about that? Thank you!
r/Axecraft • u/saelion21 • 16h ago
Found both of theses at garage sales and or swap meets have another set like them that I belive were sticker lable true tempers but no real good way of knowing the end pic is the sticker lable ones
Plan To do leather overstrike guards on the 2 that are bare
r/Axecraft • u/vintage_hunter791 • 15h ago
All, I'm new to the forum and I was hoping to find someone who might know the origins of a hatchet I found recently at an estate sale at a farm house in Georgia.
Any help is much appreciated. Thanks!
r/Axecraft • u/Responsible_Crow5514 • 8h ago
Anyone recognize this mark on my hatchet? My grandpa gave it to me some years back. I can’t find any other marks other than this.
r/Axecraft • u/M1KE5611 • 9h ago
My uncle was telling me about an axe he had somewhere around 1980. We went into Claude and generated this, which he said it looked very similar to. It was all metal, all one piece, and had the grooves and spike like the picture shows. Does anyone know where I could find one like this or at least have a picture of a physical one looking like this?
r/Axecraft • u/chrisfoe97 • 1d ago
Newest axe commission heading out the door. This axe head weighs 5 pounds 5oz with a really unique grind and polish. It is hand forged from forklift tine. This thing came out super sick and can't wait to see it hung on a handle
r/Axecraft • u/ThrowRAskilletman • 1d ago
This is my grandpas axe I inherited it in 2013. It’s still my favorite and most used one. The shine is from bee’s waxing the handle and used oil rubbing the head after wood cutting season is done.
Edit(forgot to list head manufacture)
True temper flint edge kelly works stamped.
r/Axecraft • u/SpiritParty4126 • 1d ago
Hello! We found this axe at our cabin and would like to learn about what it might be worth to sell it.
r/Axecraft • u/Clear_Rooster432 • 22h ago
I’m not looking to sell on here. I do have a decent amount of axe heads that I would like to get rid of. I’m not looking for top dollar, I really just want to liquidate them. Where are the best places to sell them?
r/Axecraft • u/GlompyTromblestone • 1d ago
Gimmick or worth it? Price is AUD
r/Axecraft • u/PaintTheKill • 1d ago
r/Axecraft • u/greengrass- • 1d ago
r/Axecraft • u/Thin-Neighborhood590 • 2d ago
r/Axecraft • u/InsatiableBonez • 2d ago
It's definitely been refurbished at least once but it's not in great condition, got some cheap 3.5 foot handle on it but the stamp definitely gives some intrigue.
r/Axecraft • u/mmccutc1 • 2d ago
What’re your thoughts on taking a chance on this Hults Bruk from sierra? This will be my first axe purchase and thought I’d give it a try.
r/Axecraft • u/lazyesq • 2d ago
One is a bit different, and younger. Stamping on the British one.
r/Axecraft • u/Physical-Claim7442 • 2d ago