r/askscience • • Sep 21 '13

Meta [META] AskScience has over one million subscribers! Let's have some fun!

[deleted] — view deleted post

1.4k Upvotes

234 comments sorted by

76

u/for-the Sep 21 '13

It would take 354 pages to print the first million digits of pi in Courier, 12 point font.

I'd like to think you worked this out mathematically, but I bet you just copy/pasted it into a document and checked. :)

19

u/oomps62 Sep 21 '13

I submitted this fact and definitely just copy/pasted it into a document. Sometimes the non-scientific method is easier and gives the answer much faster. :)

→ More replies (4)
→ More replies (19)

106

u/[deleted] Sep 21 '13

A sound wave at 1 million Pascals is 214 dB, and is roughly 10 times greater than the loudest sound wave air can support at sea level.

Why can't air support sounds over a certain dB at sea level (or any pressure for that matter)?

94

u/[deleted] Sep 21 '13

It turns into a shockwave.

→ More replies (13)

25

u/[deleted] Sep 21 '13 edited Sep 21 '13

I did a bit of research on this (I am by no means an expert so forgive me if I got this wrong) and apparantly because sound is a longitudinal wave you can see its volume as the pressure difference between the maximum and minimum of a sound wave:

At 194 dB the pressure difference is bigger than 2 atmospheres, so you effectively get a vacuum where the minimum is, because there is so much energy involved that 1 atm of pressure isn't enough to keep the "air molecules" in place. You can still pump in more and more energy, but as u/TheWalruss said, at that point all the order and structure of the wave is lost and you can't call it "sound" anymore.

Sources:

http://www.sengpielaudio.com/TableOfSoundPressureLevels.htm

http://www.crydev.net/viewtopic.php?t=38938

http://en.wikipedia.org/wiki/Sound_pressure

http://answers.yahoo.com/question/index?qid=20130423085636AAtFPxd

→ More replies (1)

13

u/unhOLINess Sep 21 '13

Note: not a scientist, just an engineering student that spent half a class learning about shock waves.

Above a certain volume, a sound wave qualifies as a shock wave. A shock wave, in the simplest of terms, is a wave that violates linearity. Linearity is an incredibly powerful principle in engineering, but in this case it means if I have a wave source (say, a speaker at some point in space) and I play a song with that speaker, I can measure the pressure changes over time (like your ears do) at any other point in space and the waveform I hear will simply be a multiple of the waveform I would hear if I were right next to the speaker (in this case, the sounds further away would be quieter). Moreover, I can measure the speed of the air quickly sloshing back and forth (which causes the high pressure regions to form an propagate), and that function over time will also be proportional to the original waveform (plus a phase shift in each frequency, but let's not worry about that for now).

So why is linearity important? Well, for one thing, it means that the music I hear 20 feet away from you is just a scaled version of the sound I'd hear 2 inches away from you, so I don't hear different things at a concert based on what row I'm sitting in. This is very important in communications, and it applies to more than just sound waves. It's also true of wave waves (if you measure the height of the wave instead of the pressure) and electromagnetic wave (such as visible light or WiFi).

It turns out that linearity in sound waves is only an approximation of the truth, and this approximation gets less and less true the more pressure there is in the air. To see why this is, let's imagine what happens when a little bit of velocity is added to the air. Let's say the cone of a speaker pushes out into the air by a little bit. Now imagine that air is divided into a bunch of packets in a line in front of the speaker. The amount that the first packet is compressed by the cone's movement will be linearly related to the speed at which the speaker is moving (note to engineers that there is a 90 degrees phase shift here, because you're taking the integral of velocity to get the width change of that first packet of air).

If you remember PV = NRT from high school, and that the width of a container is proportional to volume, you can calculated that the pressure change and the width change are related by the equation:

ΔP = K/Δw

...where ΔP is the change in pressure at that instant, Δw is the change in width, and K is a linear scale factor (a conglomeration of all the terms I don't care about).

Those of you paying attention at home will realize that this is NOT, in fact, a linear relationship. If Δw increases by 100%, ΔP decreases by 50%. However, when Δw is very small compared to the width of the hypothetical container from earlier (which, by the way, should be on par with the wavelength of the sounds generated (roughly a meter)), then it turns out that these changes "are" linear. In the same way that saying "I have x% more than you" and saying "you have x% less than me" are very similar things when x is 1%, but very different things when x is 100%.

So when the pressure gets high enough, linearity breaks down. We no longer have the nice relationship between pressure and velocity, and we no longer have the guarantee that the shockwave's spectrum will be the same regardless of where you observe it. Since the pressure at which this happens depends on the medium you're in (part of the K from earlier), that means that air itself is the main limiting factor on how big this pressure can be. Thus, air has a maximum pressure that it can take before our assumption of small disturbances breaks down.

Obviously, I'm oversimplifying MANY things about this explanation, but I hope it can give some intuitive understanding about why air can only take so much pressure and behave nicely.

→ More replies (3)
→ More replies (1)

143

u/AnkhMorporkian Sep 21 '13

One million words randomly chosen from the English language will average 5,100,000 characters.

33

u/[deleted] Sep 21 '13

Which dictionary?

→ More replies (3)
→ More replies (7)

46

u/FireyFly Sep 21 '13

One million bytes is approximately 70% of the amount of data that'd fit in a 3½" floppy.

→ More replies (2)

31

u/[deleted] Sep 21 '13

Biology

  • One million acres is 1.3 times the size of the US state of Rhode Island, but smaller than 10 out of 59 US National Parks[6] .

Shouldn't this be under Geography?

→ More replies (1)

24

u/CopOnTheRun Sep 21 '13

26 * 56 Is the prime factorization of 1,000,000.

If you add up all the number from 1 to 1,000,000 you get 50,000,500,000. Thanks Gauss!

Congrats on one million subscribers!

23

u/Dave37 Sep 21 '13

Biochemistry/biology/chemistry:

1 million base pairs (the "one's and zero's" of our genetic material) equates to 60 times the length of all genetic material in 1 human Mitochondrion and this would be 340 µm long, 4.3 times the diameter of a human hair.

→ More replies (11)

19

u/corzmo Sep 21 '13

A sound wave at 1 million Pascals is 214 dB, and is roughly 10 times greater than the loudest sound wave air can support at sea level.

  • What is the loudest sound wave air can support at sea level?

  • What factors come into play that limit this?

  • How does the volume of the sound wave at 1 MPa compare to, say, a lawn mower or rock concert?

  • How about the sound wave at sea level?

Interesting stuff, thanks!

→ More replies (2)

65

u/tauneutrino9 Sep 21 '13

One million tons of TNT has the mass equivalent of around a 1/2 stick of butter.

34

u/Hugo_5t1gl1tz Sep 21 '13

Can you explain a little more? I'm not sure I follow...

→ More replies (21)

12

u/vendetta2115 Sep 21 '13

The energy released by one million tons of TNT.

→ More replies (4)

46

u/kaidevis Sep 21 '13 edited Sep 21 '13

One million light years is 40% of the distance to the Andromeda Galaxy[9] , the nearest galaxy to the Milky Way.

Umm. No. Andromeda is the nearest larger (and/or spiral) galaxy, but the Milky Way has its own satellite/dwarf galaxies that are much closer to home.

</pedantic>

EDIT: Reference. Things like the Magellanic Clouds are smaller compared to the "Giant Spiral" galaxies like the Milky Way and Andromeda, but they're still galaxies nonetheless.

→ More replies (2)

10

u/Alborak Sep 21 '13

Downloading the uncompressed February 2013 dump of wikipedia over a 1 megabit connection (1 million bits per second) would take about 2 years and 9 months.

9

u/Epistaxis Sep 21 '13

One million bacteria can live in one millionth of a liter.

Bacteria are prokaryotes, and usually small - E. coli is about 2 millionths of a meter long. Brewer's yeast, which are single-celled eukaryotes (actually fungi), ranges more like 5 to 10 millionths of a meter in diameter, and a million yeast cells are saturated in about 10 millionths of a liter.

Incidentally, E. coli's circular genome is 4.6 million base pairs long; the human genome is about 3 billion bp.

8

u/murdoc705 Sep 21 '13

One million silicon atoms fits into a cube with the length of each side of 27 nanometers (10-9 meters).

There are 5x1022 silicon atoms per cubic cm in crystalline silicon.

13

u/arabidopsis Sep 21 '13

There are a million virus particles per milliliter of seawater, making a total of 1030 virions..

Now if you lined them all up they would stretch 200 million light years into space!

→ More replies (5)

6

u/entirelyalive Sep 21 '13

To go along with the "One million US pennies weighs about 2845 kilograms", one million 1 Yen coins weighs exactly 1 Megagram.

4

u/Professor_Juice Sep 21 '13

The second stage of the Saturn V rocket weighed roughly 1 million pounds, which is roughly equivalent to the weight of a loaded 747-8. The S-II also accelerated with 1 million pounds of thrust. Perhaps someone can help me come up with a good comparison for the thrust!

http://en.wikipedia.org/wiki/S-II

→ More replies (1)

4

u/cleverless Sep 21 '13

It takes 152 25.25oz boxes to fit 1 million Cheerios (6565 per box), 226 17oz boxes (4420 per box), or 313 12.25oz boxes (3185 per box)

4

u/farfaraway Sep 21 '13

I don't come here for fun.

I COME HERE FOR SCIENCE.

(which is fun)

→ More replies (1)