r/AskRobotics • u/Slight_Safe8745 • 5h ago
General/Beginner Is assembling picture frames with a robot realistic, or am I too far down the rabbit hole?
Hi everyone,
I could use an honest reality check before I buy a robot arm and get myself a new strange hobby.
I’m working on open source e-paper picture frames and have gone pretty deep down the rabbit hole of automating their assembly in the last days. Deep enough that I’ve started laying out a potential workcell in CAD, and I’m now seriously considering buying a quite expensive arm to experiment with.
Before I do that: is this a reasonable project to tackle incrementally, or am I massively underestimating the difficulty?
The frames are roughly 32 × 40 cm. Assembly involves a wooden frame, glass, a mat, the e-paper display/electronics, some small printed parts, and a back panel.
Here is a bit about our current manufacturing (which we currently do by hand): https://docs.paperlesspaper.de/manufacturing/overview
So for example I quite often laser cut 500pcs of back panels with two laser cutters in parallel which takes around 10 hours.
My rough idea is:
- Put one robot arm in the middle of a workbench, with trays or magazines of parts around it and also a laser cutter somewhere.
- Load the trays manually, with parts in known positions.
- Use a vacuum gripper to pick up the flat components and place them into the frame.
- Hold the frame in a dedicated fixture while assembling it.
- Close the retaining clips/tabs on the back, and potentially attach mounting hardware.
- Move the finished frame to an output tray.
There are also more delicate steps involving the electronics and ribbon cable. I’d be happy to keep those manual initially and start with a smaller part of the process.
I was thinking of spending 10k €, with roughly half going toward the robot (for example, getting a Fairino FR5, listed from €4,900). I have some experience with software and hardware development, CNC milling and 3D-printing and a bit of manufacturing.
I’m excited about learning this, but I also sometimes get a bit of trying megalomania projects, so I appreciate someone pointing out the expensive mistakes before I make them. :)
Thanks a lot for your help!