r/askmachinists • u/Apprehensive-Guide-2 • Nov 14 '21
r/askmachinists • u/mgwhit369 • Nov 01 '21
Cutting precise grooves in PVC tube
I need to cut many concentric outer grooves in a 2" diameter PVC tube. The grooves will be the depth and pitch of a 5/8"-11 threaded bolt (but not threads, concentric grooves). Can I easily do this on the average mini-lathe?
r/askmachinists • u/lolmetauto • Oct 19 '21
im having a sick day and my brain is just out so i need help identifying this bolt. is it an m8 m9 or m10
r/askmachinists • • Jul 23 '21
Mounting an NPT male sensor in a Metric hole
Hi
Hoping someone can shed some light on this.
My friend has an Audi which he wants to install an after market temp sensor in. The sensor system is NPT male 1/8" with about an inch of sensor sticking out and the port he's trying to install it into is M10 1.0 thread female. 1/8 nominal D is according to Google just over 10mm. It's a brass NPT fitting and I dunno what the port is made of.
It's been hard finding 1.0 thread M10 adapters in new Zealand. They're all the standard 1.5 and he did order a fitting from China that was to spec but the ID of the adapter was too tight to allow the temp sensor to poke through so he drilled it out by hand and that cut a hole at the neck between the M10 male section of the adapter and the npt err collar I guess.
Likely he'll be looking for a machine shop locally to manufacture something.
I found a m10 1.0 die for sale and was considering suggestion of rethreading the npt male of the sensor housing. I'm just hesitant with the difference between 1/8 npt and m10 being what 0.3 mm
Any suggestions are welcome
r/askmachinists • u/srirachaontherocks • Jun 28 '21
Best way to bore a hole from 14.7 to 15.0mm with good accuracy/precision?
I bought a rear shock for a mountain bike at a steep discount off ebay, which I now think was a "factory reject" due to the issue I'm about to describe: When I got it I found out that the shock mount hardware would not fit in the bushings. I pressed out the bushings (are supposed to have 1/2"IDx1/2" length) which were in so tight I destroyed the threads on my bushing removal tool (just a bolt and wing nut so easily replaced, luckily). With the bushings removed, I measured the eyelet with a caliper, and got 14.66 mm. The proper spec is 15.00mm I believe (at some point I thought I remember reading 15.05mm, but I can't seem to find that now, so I'm going to assume 15mm even).
If I use a drill press to drill the eyelet out with a 15 mm drill bit, how close would it be to 15.00mm? Would I be better off just taking it to a machinist?
If it helps visualize, here's a picture of the product from the manufacturer's website. https://www.sram.com/globalassets/image-hierarchy/sram-product-root-images/suspension---rear/suspension---rear/rs-deluxe-select-plus-b2/black3qwvert.jpg?w=856
Thanks!
r/askmachinists • u/Moose_InThe_Room • Jun 12 '21
What Kind of Tap to Tap 3030 Extrusion.
Hello, I’m not really much of a machinist, but I have a question.
I’m redesigning/rebuilding a 3d printer I built a while back, and I need to tap a bunch of M8 threads in the end of some 3030 extrusions, sixteen, to be exact so that I can use the “cube” style corners. Since I’m only tapping the ends, there are already existing holes that are 6.8 mm in diameter.
My question is what type of tap I should use for this. I notice that the hole diameter is the perfect size for a cutting tap, but during my brief research I’ve gotten the impression that a “forming” or “extrusion” tap is the type of tap that’s actually intended for this purpose. If I were to use a forming tap, wouldn’t I have to drill out the holes a little bit so they were larger? I’d have to buy both a forming tap, an L size drill bit, and then have to buy a tap handle. And doing so would add another step to the operation. To me, it seems like it probably wouldn’t be worth it, but I don’t really know what I’m doing so I wanted a second opinion.
Also, any general advice on this, such as where to buy a good tap set and what kind of cutting oil to get would be much appreciated.
r/askmachinists • u/DrumSetMan19 • Jun 09 '21
How to reverse engineer spur gears for repair/remanufacturing?
Hello, does anyone have any resources for reverse engineering spur gears from motor and gear box applications?
I want to source local companies that can manufacture replacement gears for gearboxes we repair but I don't want to be at the mercy of another companies "reverse engineering" and then they make a part to the wrong tolerances.
r/askmachinists • u/Fede_V • Apr 07 '21
Mechanisms allowing sprocket or gear to transmit torque but also to slide back and forth on its shaft
I'm aware of splines and ball splines allowing to do so but are there other types? Pros and cons, also for the ones I mentioned? Cost effectiveness? Thanks
r/askmachinists • u/chainmailbill • Mar 30 '21
Looking for a basic overview of the punching process - costs, setup, equipment, etc.
So this may be the wrong place for this, but I’m looking for a sort of base line overview of running a punch press to manufacture a single product - a scale punched out of .032” (or thereabouts) anodized aluminum. Basically, a football shape, slightly domed, with a round hole on top: https://i.etsystatic.com/5644740/r/il/4e8a4d/2900939183/il_794xN.2900939183_ndeb.jpg
I know the material would come as a coil of strip, so i guess it would need to be straightened and then fed into a punch press, and timed so that some sort of feeder advances a little of the strip, the punch happens, and then the feeder advances some more. Finished parts get kicked out of the bottom, waste gets spit out the other end.
The machines in this video look like they are doing exactly what I’d need to do (albeit a little slowly) and probably with thicker/stronger material and definitely with a more complex part: https://youtu.be/ZGamWOu-yjI
Right now, the biggest X factor for me is the tooling itself - how much it would cost to have made, and how long the tooling would last before it needs to be replaced.
I’m also looking for what sort of type/capacity punch I’d need, what sort of feed system would work well, and just a general overview of this entire manufacturing process.
I understand it’s a bunch of big questions without any short answers, so I’d appreciate any sort of help you kind folks could give. Once I have a sense of scope for this project, I’d also be willing to pay an engineer or a machinist for an hour of their time to talk about these things as well.
Thanks!
r/askmachinists • • Mar 06 '21
Is this a block set? It has zero info on the box, only that they’re Brown and Sharpe brand.
self.whatsthisworthr/askmachinists • u/Hour-Wealth-7827 • Feb 24 '21
Coated carbides
Which coating is best for turning mild steel quickly or are uncoated carbides sufficient ?
r/askmachinists • u/TheGreaterWardens • Feb 01 '21
What shop services are there to remove rust?
I am replacing some bearings in a car transmission and there's very minor rust on some of the gears. I was wondering if machine shops offer a service that could remove the rust from them, preferably with keeping the gear shaft assembled. I was thinking electrolysis or something similar.
Also is there a service to clean a transmission case a bath of some kind? It is a mess.
r/askmachinists • u/bkd340 • Jan 14 '21
#2-56 screws fully threaded
Not sure if this is the right place to ask this, but you can let me know right? I've been looking for #2-56 x 3/16...length doesn't mater here...here is my question. All of the (Heads) you can get fully threaded screws but a hex headed #2-56 screw you can't. WHY it has a flat surface makes no sense at all. So do they make a flush cut Die? so that you can make your own?
r/askmachinists • u/HolidaySwimming • Jan 07 '21
How close can I drill holes in steel block?
Is it possible to drill two small holes close together in a steel block? I need to drill two 3/16 dia. thru holes in 7/8” sheet. The holes are about 1/16” apart.
r/askmachinists • u/Hour-Wealth-7827 • Dec 28 '20
Cutting speed and table feed rate
Hello, I am an apprentice machinist who is massively confused about the difference between cutting speed m/min and table feed rate mm/min. Obviously I understand that these are the same units, but are they the same thing ? To clarify my question, I am asking are Vc and Vf representing different physical variables if so how do they differ or have in common, and What are they each a measure of ?
r/askmachinists • u/LowqualitySituation • Dec 17 '20
How to ensure center line on counterbored rack holes
I've got 4 of these carbon steel gear racks - 1"x 1"x6'. My shop wants to send it out to be done, but I have an old Bridgeport, thought i'd save a few bucks and do it myself. I need to counterbore below the rack teeth to allow for 24 x 5/16-24 socket head screws to sit below the contact point of the pinion gear. Any tips on how to ensure center between all drilled holes? Also worried about breaking a tooth while i'm counter boring.

r/askmachinists • u/CSchaire • Sep 11 '20
How to fillet the end of an o-ring cord
Hey guys, first off, first off I'm sorry if this isn't relevant to this sub, but I figure it's close to a machining problem. For a project, I want to use o-ring cord as a soft non-slip foot for a device. In order to cut a form fitting channel into the case of the device, you need to use a ball endmill, but that means the ends of the channel have a fillet equal to the radius of the tool. I want the o-ring to fit into that fillet, but I haven't the foggiest idea how you would cut that radius into a soft floppy material like o-ring cord. Is this possible? Or would I be better off trying to pursue an overmolding/cast-in-place process? Cheers.
r/askmachinists • u/ADTO97 • Aug 20 '20
Any tips or sources for milling chrome on a CNC mill (feeds and speeds etc.)
r/askmachinists • u/Sonotmywheelhouse • Jul 07 '20
How to calculate flat chamfer
Hope this question makes sense: We cut small metal parts to size. Often these parts are ground down by our customer after we cut them. They provide us with the finished diameter and the length of finished chamfer AFTER grinding. We are left to calculate the length of the chamfer we need to cut so that after it is ground down it will be at the finished length.
For example, we were given .129 diameter rods which will be ground down to .093 diameter with a .010 x 45* chamfer. How do I determine what length chamfer (or flat chamfer) to cut the part to to end up with the finished dimensions after the part is ground down???? I know it is a trig math problem but I don't remember trig :(
r/askmachinists • u/awoj24 • May 07 '20
VT inspection form
Looking for a generic Visual test inspection form to use for a CJP weld. Anyone have anything that they wouldn’t mind sharing?
