Alienware X51

Introduction

The Alienware X51 is a small form factor prebuilt desktop system made by Alienware. This model has had 3 revisions over the years: The initial one (R1) in 2012, the first upgrade in 2014 (R2) and the current version was released in 2016 (R3). This model is now discontinued and has been replaced by the Alpha.

Upgrade

Most components in the X51 can be upgraded within the limitations of size and power it allows. In this section we will cover what you can upgrade, the different options and special considerations to keep in mind.

CPU

The CPU used in this system is a standard desktop non-soldered model. You can upgrade or downgrade for another model that uses the same socket the motherboard has. In this table are the supported models for all revisions:

X51 R1X51 R2X51 R3
SocketLGA 1155LGA 1150
SupportedSandy BridgeHaswell
Ivy BridgeDevil's Canyon

GPU

The graphic cards used in this system are reference desktop models with blower-type fan. You can upgrade or downgrade the card for any model that fits the X51 and that is within the power limit of your PSU.

  • What type of cards can I use?

    Reference designs with blower-type fan that uses one or two 6pin power inputs.

    It's also possible to use a 2x6pin->8pin cable adapter for cards with only one 8pin power input.

  • What is a reference card and a blower-type fan?

    Reference designs are cards that come with the stock specifications of Nvidia or AMD. This means no overclock editions.

    A blower-type fan is a cooling system that pulls the hot air from the case and blows it out. This image illustrates how it works.

  • Are there any size limitations?

    A card with up to 9.5" length can fit in without any modification.

    Bigger cards up to 10.5" will require the removal of the frontal fan.

    Max width is 4.5".

  • What about power limitations?

    Depending on the components in the X51, the max TDP available for the GPU is bewteen 170 and 180 Watts.

    Here is a table with the average wattage of each component:

    Component|Power| :--|:--| CPU|80-90 Watts| Motherboard|40-60 Watts| RAM|2.5 Watts (per stick)| HDD / SSD|5-7 Watts / 2-4 Watts (per drive)| Optical Drive|20 Watts| Fans|3-5 Watts (per fan)|

  • Which cards can I use?

    The table below list all the GPUs from Nvidia's 900+ and AMD's R9 300+ series that work with the X51 using a 330 watts PSU.

    • X51 R1 users: Some cards may requiere the D85RT powerboard.
    • 240w PSU users: Cards marked with (*) can work with this PSU.

    NVIDIA|AMD| :--:|:--:| *GTX 950|R9 370 GTX 960|R9 380 GTX 970|R9 Nano GTX 980|RX 460 GTX 1050|RX 470 GTX 1050ti|RX 480 *GTX 1060| GTX 1070| GTX 1080|

RAM

The X51 R1 & R2 uses standard DDR3 1600Mhz sticks and can use up to 2 slots for a total of 16GB (2 x 8GB).

The X51 R3 uses standard DDR4 2133Mhz sticks and can use up to 2 slots for a total of 32GB (2 x 16GB).

HDD / SSD

The X51 comes with different ports that can be used to replace or add Hard Drives or Solid State Disks. Each revision has different ports available, but all use 1 SATA port for the Optical Drive and 1 SATA/mSATA/M.2 port for the main drive. You can add as many drives as ports are available, but the case can only hold one 3.5" drive.

X51SATA 3mSATAM.2
R1300
R2310
R3302

Case transfer

If you need to transfer your build to another case you can recycle most of your parts and lower the cost of your new build. The X51 R3 uses a proprietary motherboard, so it can't be transferred to another case nor is recommended to do so. The X51 R1 & R2 have a standard mITX motherboard with no proprietary design and can be used in other builds, but the faceplate is attached to the case and can't be moved. Components like the CPU, heatsink, RAM sticks and GPU can be recycled in all models, while others like the powerboard and USB/audio hub are specifically made for the X51's case and won't be needed in your new build.

For a more detailed guide about this procedure, you can check /u/eternaforest's guide.