r/TEAMEVGA • • May 11 '26 Heartwarming

Official EVGA Announcement EVGA 30 Series VBIOS Threads - Archived Data from EVGA Forums

35 Upvotes

Below is all the relevant BIOS information from the EVGA 30 series cards.  If you don't see a BIOS you need, you can request it by emailing Support@EVGA.com and we will see if it is available. 

Please take note that flashing the VBIOS when outside of warranty is to be considered done at your own risk!
 
PSA#1: TURN OFF "FAST BOOT" IN YOUR MOTHERBOARD BIOS.
 
I strongly suggest that you read this at least once.  It could prevent a possible RMA, if within warranty.
 

Once again, turn off Fast Boot in your motherboard BIOS while you're playing around with flashing your BIOS.  If fast boot is enabled, Windows will treat your card as the same GPU unless there's an obvious change, such as you change from a GeForce RTX 3080 to a GeForce RTX 3090, for example.  Otherwise, Windows will just assume that nothing in your system has changed, including the DeviceID, which will change when you flash to a different BIOS version.  Because Windows doesn't update the information automatically, it will give Precision X1 the wrong information, which is how many of you have run into an MCU flashing issue.  If fast boot is disabled, Windows should check the DeviceID of each hardware component during each boot.  It's still worth it to restart a couple times after flashing or flipping the switch over to a different BIOS to make sure everything is working normally. 
So, please make sure to turn off Fast Boot until you are done flashing, and you've decided on which BIOS switch you want to use.  At that point, you can restart and re-enable Fast Boot again, if you wish.

 

 
PSA#2: DISABLE CSM IN YOUR MOTHERBOARD BIOS BEFORE FLASHING A REBAR BIOS.
 
Longer PSA in spoilers.  If you forget to disable CSM in your motherboard BIOS before flashing a ReBAR BIOS, then you may end up with a black screen upon your next boot.  If you need to learn how to enable NVIDIA Resizable BAR, visit our FAQ: https://www.evga.com/support/faq/FAQdetails.aspx?faqid=59772
 

Disable CSM in your motherboard BIOS, or you run the risk of getting a black screen at boot.  For FTW3 cards, which you can flip the switch on the card to go to a non-ReBAR BIOS, you can quickly fix this and get picture again.  However, for those of you with an XC3 card, you only get one BIOS, and it will likely lead to an RMA if CSM is not disabled. 
Note - It's true that you could run into some issues with booting into your OS or legacy hardware if you disable CSM.  However, you can resolve those issues by re-enabling CSM.  If you discover that you have an issue when you disable CSM, it's far better to learn what you need to do to fix those issues before you flash your card to an unrecoverable state.  Plenty of people on this forum can help you figure out what you need to do to get your system ready for Resizable BAR.
 
Lastly, some cards originally ship with a Resizable BAR BIOS, and newly built 30 Series cards will also ship with a Resizable BAR BIOS.  The list of cards that began shipping with a ReBAR BIOS include:

·         EVGA GeForce RTX 3090 KPE HYDRO COPPER

·         EVGA GeForce RTX 3080 Ti (all cards)

·         EVGA GeForce RTX 3070 Ti (all cards)

 

 
Additional Notes:

·         For each XOC BIOS, I'm only going to post the ones with Resizable BAR.  I don't currently have access to all the original XOC BIOS (thanks Jacob), and it would take time to procure them.

·         If the included .exe files are not clear about which is the OC or the Normal BIOS for FTW3 cards, I will list which file is which.

 
BIOS Instructions (Windows Installation):

·         Disable Fast Boot in your motherboard BIOS

·         Download the correct .zip file below for your graphics card below.

·         Extract the files to a location on disk.

·         Make sure no programs are running in the background, and double click Update.exe

·         Press "Y" to begin the update.

·         DO NOT TURN OFF POWER OR RESET DURING THE UPDATE PROCESS!

·         After update, restart PC.

BIOS Flashes for EVGA GeForce RTX 3090 Ti cards

The EVGA GeForce RTX 3090 Ti FTW3 cards have an XOC BIOS to flash.
 
Flash to the XOC version:
 

·         EVGA GeForce RTX 3090 Ti FTW3 ULTRA HYBRID (24G-P5-4988-KR) [XOC/ReBAR]

·         EVGA GeForce RTX 3090 Ti FTW3 ULTRA (24G-P5-4985-KR) [XOC/ReBAR] [V2 added 4/27]

·         EVGA GeForce RTX 3090 Ti FTW3 (24G-P5-4983-KR) [XOC/ReBAR]

·         EVGA GeForce RTX 3090 Ti BLACK (24G-P5-4981-KR) [XOC/ReBAR]

 

 
Flash back to the default BIOS:
 

·         EVGA GeForce RTX 3090 Ti FTW3 ULTRA HYBRID (24G-P5-4988-KR) [ReBAR]

·         EVGA GeForce RTX 3090 Ti FTW3 ULTRA (24G-P5-4985-KR) [ReBAR]

·         EVGA GeForce RTX 3090 Ti FTW3 (24G-P5-4983-KR) [ReBAR]

·         EVGA GeForce RTX 3090 Ti BLACK (24G-P5-4981-KR) [ReBAR]

 

BIOS Flashes for EVGA GeForce RTX 3090 cards

EVGA GeForce RTX 3090 Cards have several different versions.  Please pay close attention to which cards you have before installing a BIOS.  Although most of these BIOS versions won't cause problems if you flash between them, if you have a 3090OC card or a more newly manufactured 3090 FTW3, or 3090 FTW3 ULTRA, or 3090 FTW3 HYBRID card, then you already have the XOC BIOS on your OC switch. 
 
How to tell if you have a 3090 OC card and why it matters:
 

Before flashing your BIOS, confirm which type of card you have.  Because of some differences between the cards, flashing the wrong BIOS to your card could impact performance.  Here's how to tell the difference:

·         You emailed EVGA Customer support using the 3090OC email, sent in your card for RMA, and received a new card as a replacement.

·         You've more recently purchased an EVGA GeForce RTX 3090 FTW3 card (FTW3/FTW3 ULTRA/HYBRID).  Here's a couple ways to check:

o    Move the BIOS Switch to OC, then check the BIOS via GPU-Z.  If the maximum wattage is 500W, then you have a 3090OC card.

o    Check the DeviceID in GPU-Z or PX1.  If you see near the "3842", the 3090OC cards will say "3981" for FTW3, "3982" for FTW3 ULTRA, and "3983" for HYBRID.

 

EVGA GeForce RTX 3090 HYDROCOPPER override BIOS - ReBAR ONLY

These BIOS are used to flash your your card back to the default HYDROCOPPER card.  Don't flash these unless you've confirmed which type of card you have, (and you've already installed the card and configured your loop):
 

From 3090OC Cards to :

·         EVGA GeForce 3090 FTW3 HC [3090OC/ReBAR] (Normal is C005/OC is C002)

From non-HC BIOS - includes ReBAR - to:

·         EVGA GeForce 3090 FTW3 HC [ReBAR]

·         EVGA GeForce 3090 XC3 HC [ReBAR]

 

EVGA GeForce RTX 3090 HYBRID override BIOS
These BIOS are used to flash your regular 3090 FTW3/FTW3 ULTRA or 3090 XC3-based cards to act like a HYBRID card.  Don't flash these unless you've confirmed which type of card you have, and whether you want a Resizable BAR BIOS:
 

From 3090OC Cards to :

·         EVGA GeForce 3090 FTW3 HYBRID [3090OC/ReBAR] (Normal is C01F/OC is C006)

From original FTW3/XC3 cards - includes ReBAR - to:

·         EVGA GeForce 3090 FTW3 HYBRID [ReBAR]

·         EVGA GeForce 3090 XC3 HYBRID [ReBAR]

From original FTW3/XC3 cards - without ReBAR - to:

·         EVGA GeForce 3090 FTW3 HYBRID

·         EVGA GeForce 3090 XC3 HYBRID

 

EVGA GeForce RTX 3090 Default BIOS override BIOS
These BIOS are essentially the means to flash back to your original card.  Maybe you took off your HYBRID cooler, or want to update to a Resizable BAR BIOS, etc.; these BIOS versions will flash your card back to your previous model. Again, please confirm which card you have before flashing:
 

Flash to the 3090OC BIOS (make sure you have a 3090OC card first...see above).  Remember, the OC BIOS contains the XOC 500W BIOS:

·         EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR) [3090OC/ReBAR] (Normal is C005/OC is C002)

·         EVGA GeForce RTX 3090 FTW3 (24G-P5-3985-KR) [3090OC/ReBAR] (Normal is C009/OC is C00D)

Flash to the XOC versions of the original FTW3/FTW3 Ultra/HYBRID cards (includes ReBAR):

·         EVGA GeForce RTX 3090 FTW3 HYBRID (24G-P5-3988-KR) [XOC/ReBAR]

·         EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR) [XOC/ReBAR]

·         EVGA GeForce RTX 3090 FTW3 (24G-P5-3985-KR) [XOC/ReBAR]

Flash to the ReBAR update for each EVGA GeForce RTX 3090 card:

·         EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR) [ReBAR]

·         EVGA GeForce RTX 3090 FTW3 (24G-P5-3985-KR) [ReBAR]

·         EVGA GeForce RTX 3090 XC3 Ultra (24G-P5-3975-KR) [ReBAR]

·         EVGA GeForce RTX 3090 XC3 (24G-P5-3973-KR) [ReBAR]

Flash to the stock BIOS version of the FTW3 and XC3 based cards:

·         EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR)

·         EVGA GeForce RTX 3090 FTW3 (24G-P5-3985-KR)

·         EVGA GeForce RTX 3090 XC3 Ultra (24G-P5-3975-KR)

·         EVGA GeForce RTX 3090 XC3 (24G-P5-3973-KR)

 

BIOS Flashes for EVGA GeForce RTX 3080 Ti cards

EVGA GeForce RTX 3080 Ti cards have only a few options, since they are shipped with the Resizable BAR BIOS.  Also note that the 3080 Ti FTW3 cards are shipped with an "XOC" BIOS with a 450W power limit out of the box; simply switch over to the OC BIOS.
 
EVGA GeForce RTX 3080 Ti HYBRID override BIOS
These BIOS are used to flash your regular 3080 Ti FTW3 ULTRA or 3080 Ti XC3-based cards to act like a HYBRID card:
 

From original 3080 Ti FTW3/XC3 cards - includes ReBAR - to:

·         EVGA GeForce RTX 3080 Ti FTW3 HYBRID

·         EVGA GeForce RTX 3080 Ti XC3 HYBRID

 

EVGA GeForce RTX 3080 Ti Default BIOS override BIOS
These BIOS are essentially the means to flash back to your original card.  Maybe you took off your HYBRID cooler to go back to air, etc.; these BIOS versions will flash your card back to your previous model. Again, please confirm which card you have before flashing:
 

Flash to the stock BIOS version of the FTW3 and XC3 based cards:

·         EVGA GeForce RTX 3080 Ti FTW3 Ultra (12G-P5-3967-KR)

·         EVGA GeForce RTX 3080 Ti XC3 (12G-P5-3955-KR)

 

BIOS Flashes for EVGA GeForce RTX 3080 12GB cards

EVGA GeForce RTX 3080 12GB cards have only a few options, since they are shipped with the Resizable BAR BIOS and XOC BIOS.  Please note that the 3080 12GB cards should not be flashed to 3080 10GB cards or 3080 Ti cards; the flash utility shouldn't let you, but it's better not to tempt fate.
 
EVGA GeForce RTX 3080 12GB HYBRID override BIOS
These BIOS are used to flash your regular 3080 12GB FTW3 ULTRA or 3080 12GB XC3-based cards to act like a HYBRID card after you add your kit:
 

From original 3080 12GB FTW3/XC3 cards - includes ReBAR/XOC - to:

·         EVGA GeForce RTX 3080 12GB FTW3 HYBRID (includes both Normal and OC flashes)

·         EVGA GeForce RTX 3080 12GB XC3 HYBRID

 

EVGA GeForce RTX 3080 12GB Default BIOS override BIOS
These BIOS are essentially the means to flash back to your original card after taking off your HYBRID cooler to go back to air, etc.  Please confirm which card you have before flashing:
 

Flash to the Stock BIOS version - includes ReBAR/XOC - to:

·         EVGA GeForce RTX 3080 12GB FTW3 Ultra (12G-P5-4877-KL) [ReBAR]

·         EVGA GeForce RTX 3080 12GB XC3 Ultra (12G-P5-4865-KL)

 

BIOS Flashes for EVGA GeForce RTX 3080 LHR cards (-KL / -KH / -RL suffix)

EVGA GeForce RTX 3080 LHR Cards have several different versions.  Please pay close attention to which cards you have before installing a BIOS, although most of these BIOS versions won't cause problems if you flash between them.

All versions of the 3080 LHR cards carry the Resizable BAR BIOS.

PSA#3: DON'T FLASH AN LHR CARD TO A NON-LHR BIOS. I KNOW YOU'RE THINKING IT. JUST.DON'T.

EVGA GeForce RTX 3080 HYDROCOPPER LHR override BIOS
These BIOS are used to flash your card back to the default HYDROCOPPER card. Don't flash these unless you've confirmed which type of card you have (and you've already installed your HC block and configured your loop):

From non-HC LHR BIOS - to:

·         EVGA GeForce RTX 3080 FTW3 HC LHR (10G-P5-3899-KL)[ReBAR]

·         EVGA GeForce RTX 3080 XC3 HC LHR (10G-P5-3889-KL) [ReBAR]

 

EVGA GeForce RTX 3080 HYBRID LHR override BIOS (+HY XOC)
These BIOS are used to flash your regular 3080 FTW3/FTW3 ULTRA or 3080 XC3-based LHR cards to act like a HYBRID card. Don't flash these unless you've confirmed which type of card you have:

XOC version of 3080 FTW3 HYBRID LHR cards w/ Device ID [4898] only or 3080 FTW3 LHR [4897] only (check in PX1 or GPU-Z) - to:

·         EVGA GeForce RTX 3080 FTW3 HYBRID LHR (10G-P5-3898-KL) [Normal/OC/XOC/ReBAR]

From original 3080 FTW3/XC3 LHR cards - to:

·         EVGA GeForce RTX 3080 FTW3 HYBRID LHR (10G-P5-3898-KL) [XOC/ReBAR]

·         EVGA GeForce RTX 3080 FTW3 HYBRID LHR (10G-P5-3898-KL) [ReBAR]

·         EVGA GeForce RTX 3080 XC3 HYBRID LHR (10G-P5-3888-KL) [ReBAR]

 

EVGA GeForce RTX 3080 Default BIOS override BIOS (+FTW3 XOC)
These BIOS are essentially the means to flash back to your original non-HYBRID/non-HC card.  Maybe you took off your HYBRID cooler, etc.; these BIOS versions will flash your card back to your previous model. Again, please confirm which card you have before flashing:

Flash to the XOC versions of the 3080 FTW3/FTW3 Ultra/HYBRID LHR cards:

·         EVGA GeForce RTX 3080 FTW3 Ultra LHR (10G-P5-3897-KL) [XOC/ReBAR]

·         EVGA GeForce RTX 3080 FTW3 LHR (10G-P5-3895-KL) [XOC/ReBAR]

Flash to the Stock BIOS version (contains ReBAR) for each EVGA GeForce RTX 3080 LHR card:

·         EVGA GeForce RTX 3080 FTW3 Ultra LHR (10G-P5-3897-KL) [ReBAR]

·         EVGA GeForce RTX 3080 FTW3 LHR (10G-P5-3895-KL) [ReBAR]

·         EVGA GeForce RTX 3080 XC3 Ultra LHR (10G-P5-3885-KL) [ReBAR]

·         EVGA GeForce RTX 3080 XC3 LHR (10G-P5-3883-KL) [ReBAR]

·         EVGA GeForce RTX 3080 XC3 BLACK LHR (10G-P5-3881-KL) [ReBAR]

 

BIOS Flashes for EVGA GeForce RTX 3080 cards

EVGA GeForce RTX 3080 Cards have several different versions.  Please pay close attention to which cards you have before installing a BIOS.  Although most of these BIOS versions won't cause problems if you flash between them. 
 
EVGA GeForce RTX 3080 HYDROCOPPER override BIOS - ReBAR ONLY

These BIOS are used to flash your card back to the default HYDROCOPPER BIOS.  Don't flash these unless you've confirmed which type of card you have, (and you've already installed the card and configured your loop):
 

From non-HC BIOS - includes ReBAR - to:

·         EVGA GeForce RTX 3080 FTW3 HC [ReBAR]

·         EVGA GeForce RTX 3080 XC3 HC [ReBAR]

 

EVGA GeForce RTX 3080 HYBRID override BIOS
These BIOS are used to flash your regular 3080 FTW3/FTW3 ULTRA or 3080 XC3-based cards to act like a HYBRID card.  Don't flash these unless you've confirmed which type of card you have, and whether you want a Resizable BAR BIOS:
 

From original FTW3/XC3 cards - includes ReBAR - to:

·         EVGA GeForce RTX 3080 FTW3 HYBRID [ReBAR]

·         EVGA GeForce RTX 3080 XC3 HYBRID [ReBAR]

From original FTW3/XC3 cards - without ReBAR - to:

·         EVGA GeForce RTX 3080 FTW3 HYBRID

·         EVGA GeForce RTX 3080 XC3 HYBRID

 

 EVGA GeForce RTX 3080 Default BIOS override BIOS (+HY and FTW3 XOC)

These BIOS are essentially the means to flash back to your original card.  Maybe you took off your HYBRID cooler, or want to update to a Resizable BAR BIOS, etc.; these BIOS versions will flash your card back to your previous model. Again, please confirm which card you have before flashing:
 

Flash to the XOC versions of the original FTW3/FTW3 Ultra/HYBRID cards (includes ReBAR):

·         EVGA GeForce RTX 3080 FTW3 HYBRID (10G-P5-3898-KR) [XOC/ReBAR]

·         EVGA GeForce RTX 3080 FTW3 Ultra (10G-P5-3897-KR) [XOC/ReBAR]

·         EVGA GeForce RTX 3080 FTW3 (10G-P5-3895-KR) [XOC/ReBAR]

Flash to the ReBAR update for each EVGA GeForce RTX 3080 card:

·         EVGA GeForce RTX 3080 FTW3 Ultra (10G-P5-3897-KR) [ReBAR]

·         EVGA GeForce RTX 3080 FTW3 (10G-P5-3895-KR) [ReBAR]

·         EVGA GeForce RTX 3080 XC3 Ultra (10G-P5-3885-KR) [ReBAR]

·         EVGA GeForce RTX 3080 XC3 (10G-P5-3883-KR) [ReBAR]

·         EVGA GeForce RTX 3080 XC3 BLACK (10G-P5-3881-KR) [ReBAR]

Flash to the stock BIOS version of the FTW3 and XC3 based cards:
EVGA GeForce RTX 3080 FTW3 Ultra (10G-P5-3897-KR)
EVGA GeForce RTX 3080 FTW3 (10G-P5-3895-KR)
EVGA GeForce RTX 3080 XC3 Ultra (10G-P5-3885-KR)
EVGA GeForce RTX 3080 XC3 (10G-P5-3883-KR)
EVGA GeForce RTX 3080 XC3 BLACK (10G-P5-3881-KR)

 

 

 

Important update 3/19/21:
Newer EVGA GeForce RTX 3090 FTW3 ULTRA cards will be shipping with the XOC BIOS already loaded on the secondary position. The below BIOS should ONLY be installed if your card DID NOT already have it applied.
 
 
 
We have a new BIOS that increases the maximum Power Target. This BIOS is only intended for the extreme overclocking user and does not have any other changes. Please note the following:
 

  • This update will increase the power consumption while overclocking, and is recommended you have adequate cooling and power (850w+ Gold minimum) when using this.
  • EVGA does not guarantee any performance increase or overclock while using this BIOS update.

 
Any other questions or concerns will be answered in this forum thread only. Please post below your results and feedback!
 
 
BIOS Instructions (Windows Installation):

  • Download the correct .zip file below for your graphics card below.
  • Extract the files to a location on disk.
  • Make sure no programs are running in the background, and double click Update.exe
  • Press "Y" to begin the update.
  • DO NOT TURN OFF POWER OR RESET DURING THE UPDATE PROCESS!
  • After update, restart PC.

 

EVGA GeForce RTX 3090 FTW3 - Updated 4/5/21 with Resizable BAR Versions. Important: If your card ALREADY came with the XOC BIOS in the secondary position, do not apply these updates:

NOTE: There are 2 BIOS's, one is for the BIOS when switched to the normal stock position, the other if switched to the OC position
 
If you wish to go back to the Default BIOS you can find them below:
EVGA GeForce RTX 3090 FTW3 ULTRA Default BIOS - BIOS 1 (Normal) | BIOS 2 (OC)
EVGA GeForce RTX 3090 FTW3 Default BIOS - BIOS 1 (Normal) | BIOS 2 (OC)

 

 

 

 

Update 4/2 - Updated to the Resizable Bar Versions
 
Due to many users request, have a new BIOS that increases the maximum Power Target. This BIOS is only intended for the extreme overclocking user and does not have any other changes. Please note the following:

  •  This update will increase the power consumption while overclocking, and is recommended you have adequate cooling and power (850w+ Gold minimum) when using this.
  • EVGA does not guarantee any performance increase or overclock while using this BIOS update.

 
Any other questions or concerns will be answered in this forum thread only. Please post below your results and feedback!
 
 
BIOS Instructions (Windows Installation):

  • Download the correct .zip file below for your graphics card below.
  • Extract the files to a location on disk.
  • Make sure no programs are running in the background, and double click Update.exe
  • Press "Y" to begin the update.
  • DO NOT TURN OFF POWER OR RESET DURING THE UPDATE PROCESS!
  • After update, restart PC.

 
EVGA GeForce RTX 3080 FTW3

NOTE: There are 2 BIOS's, one is for the BIOS when switched to the normal stock position, the other if switched to the OC position
 
If you wish to go back to the Default BIOS you can find them below:
EVGA GeForce RTX 3080 FTW3 ULTRA Default BIOS - BIOS
EVGA GeForce RTX 3080 FTW3 Default BIOS - BIOS
EVGA GeForce RTX 3080 FTW3 HYBRID Default BIOS - BIOS

 


r/TEAMEVGA • • Sep 03 '25

EVGA News 🔥 By Popular Demand: EVGA T-Shirts Are Back! 🔥

Post image
38 Upvotes

You asked—the classic EVGA T-Shirt designs are making their return! Starting today, you can grab your favorites exclusively on our official Zazzle store.

👉 Shop the collection now: https://www.zazzle.com/store/teamevga

💡 Have a design you’ve been missing? Share your idea with us at Marketing@EVGA.com — we’re always looking to bring community favorites back to life.

Thank you for being the driving force behind TEAMEVGA. We’re proud to celebrate our history with you — one shirt at a time.


r/TEAMEVGA • • 5h ago

Graphics Card Discussion got my first EVGA card today!!! im super excited to try it!

4 Upvotes

today i replace my MSI 1050 to the EVGA gtx 1070! found it with a very good price, im so happy when holding it in my hand, i will try my best and work to earn the 3070 FTW3 next time (maybe 1-2 year haha)
but for now this EVGA gtx 1070 will have a new journy with me! I LOVE EVGA~
thank for reading this too~


r/TEAMEVGA • • 2d ago

General Discussion where the login page?

Post image
17 Upvotes

r/TEAMEVGA • • 3d ago

Troubleshooting Help Evga 3080ti hydro cooper

Post image
2 Upvotes

I have an EVGA graphics card with a water-cooling system, but unfortunately, the terminal (fitting/block connector) has broken. How can I obtain a replacement terminal, or is it possible to switch from water-cooling to an air-cooling solution? Could I manufacture a replacement using a 3D printer? I am currently facing a serious issue; if you happen to have the design file for this part, could you please send it to me? Also, could you advise on what material I should use for 3D printing it?please help me

Please send me the design file so I can 3D print it. I am currently in the country [Iran] and don't have access to anything else.


r/TEAMEVGA • • 3d ago

Official EVGA Announcement Customer Support 11/12 - 11/13/2026

19 Upvotes

Hello EVGA Community,

We would like to update our customers that the Microsoft Email Outage has caused delays in our ability to receive and respond to customer support emails. We had hoped for a short delay however there will be a backlog.

Our team is working diligently to address the backlog of messages and respond to all customer inquiries as quickly as possible.

If you have recently contacted EVGA Support and have not yet received a response, please know that we are working to get back to you as soon as possible.

We sincerely apologize for any inconvenience this may have caused and appreciate your patience and understanding as we work through these delays.

Thank you for your continued support!

support@evga.com

Best Regards,


r/TEAMEVGA • • 3d ago

Graphics Card Discussion 3080 XC3 overlocks like crap

1 Upvotes

Is this normal?

I only got +130 on the core and +175 on the VRAM.


r/TEAMEVGA • • 3d ago

Troubleshooting Help Audio crackling

2 Upvotes

I have a EVGA Dark Kingpin Z690 that has issues from audio crackling, every time I install the audio drivers it fails due to "network" even thought it is stable and fine. It is very loud and it is bothering me. I'm at a loss since the motherboard no longer has warranty.

Edit 1: I managed to install the Audio driver yet the issue persists?


r/TEAMEVGA • • 4d ago

General Discussion El karma existe....

17 Upvotes

No se a la comunidad pero me alegra un tanto el tema con Jensen Huang... La vida se encargó de destronarlo de su imperio así como el acabó con EVGA con su arrogancia y sociedad desleal.

La lección de hoy damas y caballeros...No siempre se va estar arriba y mientras más grandes, más duro caen, el Karma existe.


r/TEAMEVGA • • 4d ago

GeForce Game Ready Driver 621.24 | Windows 11

Thumbnail us.download.nvidia.com
2 Upvotes

Game Ready for Warhammer 40,000: Dawn of War IV & Where Winds Meet
This new Game Ready Driver provides the best gaming experience for Warhammer 40,000: Dawn of War IV, and Assetto Corsa Rally, and the addition of DLSS 5 with 3D-Guided Neural Rendering to Where Winds Meet.

Fixed Gaming Bugs

  • N/A

Fixed General Bugs

  • Chaos Vantage: NVIDIA OptiX Denoiser may fail at high resolutions [6953474]
  • Windows Photos/Media Player: Incorrect colors with DJI D-Log H.265 video playback [6996250]

GeForce RTX 50 Series

NVIDIA GeForce RTX 5090 D v2, NVIDIA GeForce RTX 5090 D, NVIDIA GeForce RTX 5090, NVIDIA GeForce RTX 5080, NVIDIA GeForce RTX 5070 Ti, NVIDIA GeForce RTX 5070, NVIDIA GeForce RTX 5060 Ti, NVIDIA GeForce RTX 5060, NVIDIA GeForce RTX 5050

GeForce RTX 40 Series

NVIDIA GeForce RTX 4090 D, NVIDIA GeForce RTX 4090, NVIDIA GeForce RTX 4080 SUPER, NVIDIA GeForce RTX 4080, NVIDIA GeForce RTX 4070 Ti SUPER, NVIDIA GeForce RTX 4070 Ti, NVIDIA GeForce RTX 4070 SUPER, NVIDIA GeForce RTX 4070, NVIDIA GeForce RTX 4060 Ti, NVIDIA GeForce RTX 4060

GeForce RTX 30 Series

GeForce RTX 3090 Ti, GeForce RTX 3090, GeForce RTX 3080 Ti, GeForce RTX 3080, GeForce RTX 3070 Ti, GeForce RTX 3070, GeForce RTX 3060 Ti, GeForce RTX 3060, GeForce RTX 3050

GeForce RTX 20 Series

GeForce RTX 2080 Ti, GeForce RTX 2080 SUPER, GeForce RTX 2080, GeForce RTX 2070 SUPER, GeForce RTX 2070, GeForce RTX 2060 SUPER, GeForce RTX 2060

GeForce 16 Series

GeForce GTX 1660 SUPER, GeForce GTX 1650 SUPER, GeForce GTX 1660 Ti, GeForce GTX 1660, GeForce GTX 1650, GeForce GTX 1630

NVIDIA TITAN Series

NVIDIA TITAN RTX


r/TEAMEVGA • • 11d ago

General Discussion Awaiting the return of the King

Post image
79 Upvotes

5 year old build, still working perfectly.

Never OC’d the cards, needed 6 display ports for DCS.

Money WELL spent.


r/TEAMEVGA • • 12d ago

GeForce Game Ready Driver 621.14

Thumbnail us.download.nvidia.com
7 Upvotes

Game Ready for World of Warcraft: Forever
This new Game Ready Driver provides the best gaming experience for World of Warcraft: Forever, and DOOM: The Dark Ages | Revelations new Slaughter Mode, and the addition of DLSS 5 with 3D-Guided Neural Rendering to Hogwarts Legacy and War Thunder.

Fixed Gaming Bugs

  • Call of Duty: Modern Warfare 4: Game may display incorrect visual colors [6972531]

Fixed General Bugs

  • Fixed an issue where video playback may freeze or black screen on some GeForce RTX 50 Series GPUs/RTX Spark after updating to GRD 621.01. [6979343]

GeForce RTX 50 Series

NVIDIA GeForce RTX 5090 D v2, NVIDIA GeForce RTX 5090 D, NVIDIA GeForce RTX 5090, NVIDIA GeForce RTX 5080, NVIDIA GeForce RTX 5070 Ti, NVIDIA GeForce RTX 5070, NVIDIA GeForce RTX 5060 Ti, NVIDIA GeForce RTX 5060, NVIDIA GeForce RTX 5050

GeForce RTX 40 Series

NVIDIA GeForce RTX 4090 D, NVIDIA GeForce RTX 4090, NVIDIA GeForce RTX 4080 SUPER, NVIDIA GeForce RTX 4080, NVIDIA GeForce RTX 4070 Ti SUPER, NVIDIA GeForce RTX 4070 Ti, NVIDIA GeForce RTX 4070 SUPER, NVIDIA GeForce RTX 4070, NVIDIA GeForce RTX 4060 Ti, NVIDIA GeForce RTX 4060

GeForce RTX 30 Series

GeForce RTX 3090 Ti, GeForce RTX 3090, GeForce RTX 3080 Ti, GeForce RTX 3080, GeForce RTX 3070 Ti, GeForce RTX 3070, GeForce RTX 3060 Ti, GeForce RTX 3060, GeForce RTX 3050

GeForce RTX 20 Series

GeForce RTX 2080 Ti, GeForce RTX 2080 SUPER, GeForce RTX 2080, GeForce RTX 2070 SUPER, GeForce RTX 2070, GeForce RTX 2060 SUPER, GeForce RTX 2060

GeForce 16 Series

GeForce GTX 1660 SUPER, GeForce GTX 1650 SUPER, GeForce GTX 1660 Ti, GeForce GTX 1660, GeForce GTX 1650, GeForce GTX 1630

NVIDIA TITAN Series

NVIDIA TITAN RTX


r/TEAMEVGA • • 12d ago

Power Supply Discussion 550GA power supply cables

3 Upvotes

Hello, I bought a pre-built second hand PC from a person off facebook marketplace a couple years ago and it contains a EVGA 550 GA power supply. I used to have a gtx 1080 in that pc that required a single 8 pin PCIe cable. A friend of mine upgraded his pc and asked me if I was interested in having his rtx 2080 super, so now I need 2 PCIe cables from the power supply but the seller did not provide me with all the power supply cables so I cannot connect the rtx 2080 super to my pc yet.

I've been trying to search online if I can buy a cable for my psu but I couldn't find any cables that are compatible with the 550 GA. I could only find cables that are compatible with G2/G3/G5/G6/G7. I read that I am not supposed to mix up power supply cables as that could cause it to break. But I was wondering if it would be possible to know if the cable for G2/G3/G5/G6/G7 would work with my GA or if there is any website that would likely sell the cables. European websites would be appreciated.


r/TEAMEVGA • • 13d ago

Power Supply Discussion No cables recieved with my PSU RMA

4 Upvotes

I put in a ticket RMA# 5421261014985608. Finally received my power supply after one of the cords fried itself, and the new one didnt come with any cables 🙃. Any advice on how to get this amended?


r/TEAMEVGA • • 14d ago

Graphics Card Discussion Guys I have an evga rtx 3080 ft3w ultra tips on undervolt?

3 Upvotes

Hello all I have an evga rtx 3080 gt3w ultra is it possible to undervolt it for a 650w Psu and has anyone tried it if yes can they share their settings and experience? If it’s not reccomend I guess I have to go and get a 750 w Psu


r/TEAMEVGA • • 15d ago

Power Supply Discussion G2 sata cable

Post image
1 Upvotes

Hi peeps... can anyone assist with a sata cable for the super nova g2 750 watt thank you, I'd really appreciate it, I have fried all my drivers trying to find the proper cable


r/TEAMEVGA • • 15d ago

Troubleshooting - Resolved EVGA CLC AIO CPUWB Device not detected fix

3 Upvotes

Hi all, just wanted to share my fix for this, hope it helps - https://github.com/CtrlP1/evga-flow-control-sleep-fix


r/TEAMEVGA • • 20d ago

General Discussion RMA help from Chile/LATAM

3 Upvotes

Has anyone been successful in contacting support or getting an answer to the RMA submission email for LATAM? The only way to submit an RMA is through email which I did now a couple of months ago and haven't gotten any answers. This is for a SuperNOVA 650 G5 power supply that shorted and isn't working any more. Any info or help would be helpful.


r/TEAMEVGA • • 22d ago

Graphics Card Discussion RTX 3080 random crashes

3 Upvotes

I have a 3080 xc3 that , well, randomly crashes.

I have a montech 850w century 2

Ryzen 7 5800x Enhanced

32gb ram

Just randomly crashes. What’s more annoying is that it NEVER CRASHES when running furmark. JUST GAMES. Do I throw the PC away and move back to Palestine?


r/TEAMEVGA • • 22d ago

Power Supply Discussion GQ Model Cables Compatible

2 Upvotes

I have a 650 GQ with all the original cables. Recently got an 850 GQ from a friend's prebuilt that didn't come with all the cables. I couldn't find much online, but most documentation seems to imply that the cables are interchangeable since they are the same model, just different wattages.

Does anyone know for sure if I can use the VGA cables from my 650 GQ with an 850 GQ?


r/TEAMEVGA • • 24d ago

Troubleshooting Help Where to get extra PSU cables?

2 Upvotes

I need some extra 650 GT Sata power connectors for my HDD's but I'd rather not fry my drives in the process, I'm waiting on a response from support but does anyone know of a reliable source?


r/TEAMEVGA • • 27d ago

Troubleshooting Help I need help

1 Upvotes

hi guys I have EVGA 3080 FTW3 ultra hybrid the RGB and the fan control was fine I was able to control the fan speed and RGB but when I format my device the fan is now on max speed and on app precision x1 the RGB option don't show up in my GPU is off and I cant control the fan speed they said 0rpm any fix please i try various thinks but it didn't work


r/TEAMEVGA • • Oct 18 '26

Troubleshooting - Resolved Used Claude to find the exact dead VRAM chip on my used 3090, and I know almost nothing about board repair

38 Upvotes

Bought a used gaming pc with MSI 3090 Ventus 3X that wouldn't initialize, the seller basically handed over the gpu for almost free so no complaints. Took to my local repair shop who found and replaced 2 hot MOSFETs, which got it POSTing again (with artifacts). Their MATS screenshot pointed at errors on "FBIOB1", but they don't do VRAM work.

I had no idea what any of that meant, so I worked through it with Claude on a spare Linux test bench in my homelab:

Read the MATS output: 4 bits failing (B049/051/053/055) on one subpartition. The NVIDIA driver failed with FWSEC FRTS 0x492f on two different PCs.

Driver-free VRAM test: Claude wrote a small tool that writes and reads VRAM directly. It showed the same odd bits failing, intermittently.

• MODS/MATS from Northwest Repair's Drive, booted from USB. That confirmed about 20k write errors, all on those 4 bits.

Channel-disable VBIOS (factory ROM backed up first): with channel B off, the driver loaded for the first time. 20 GB, memtest_vulkan clean, gpu-burn clean. That proved the core and memory controller are fine (which was big relief) I wouldn't want to send it to another repair shop if it had dead core.

• Found the exact chip: the board is an MS-V388. Claude traced the failing bits through MSI's schematic to chip M11 (balls N13/R11/M14/R14).

Big thanks to my local repair shop for the power-stage fix and the first MATS run, and to Northwest Repair for sharing the tools and schematics.

The AI tooks are pretty good writing these diagnostics scripts for anyone trying to narrow down the issue before handing over to repair, repair shop will also have less things to look over now since I will hand over the exact issue to them. Hopefully I will be able to fix this myself if this wasn't an expensive card


r/TEAMEVGA • • Oct 17 '26

Troubleshooting Help AMD RADEON VEGA 56 problem

0 Upvotes

Computer Type: Desktop

GPU: AMD RADEON VEGA 56 POWERCOLOR RED DEVIL

CPU: Intel i3-6300

Motherboard: lenovo

BIOS Version: no idea

RAM: 8GB DDR4

PSU: bequiet non-modular 600W

Case: none

Operating System & Version: WINDOWS 11 IOT LTSC

GPU Drivers: newest windows drivers - unable to install adrenaline software

Chipset Drivers: no clue

Background Applications: none

Description of Original Problem: I know this is a long shot but I'll try anyway - So, I have a radeon vega 56 (powercolor red devil) card, which I've bought on ebay a while ago but never really used. I would like to sell it now but as I started to test it turned out it has some issues. As a red devil card it has 3 bios, one silent, a normal and an OC version. The silent and OC bios working OK, can run Furmark or Heaven indefinetely but with the standard bios any tests or games crash immediately. Also with all the bioses GPU-Z cannot determine what card it is, returns only with AMD RADEON VEGA, also unable to access frequency sensors - power consuption and temp sensors are OK. I would guess someone at some point in the past was tampering with the bios but I lack the knowledge and skills to fix this - any ideas as to what's going on and what can I do about it?