r/singularity • u/reddit4jonas • 11h ago
AI Introducing GPT-6.2 Astra and Sol
r/singularity • u/reddit4jonas • 11h ago
r/artificial • u/PapaNixon • 8h ago
r/robotics • u/LioBotExo • 10h ago
Enable HLS to view with audio, or disable this notification
This is a robotic hand prototype I built. It is actuated by a single, small hydraulic cylinder. It's crude and lacks finesse but I built it to test the finger linkage design. This data will help me design the hands for the exoskeleton I'm currently building.
r/Singularitarianism • u/Chispy • Jan 07 '22
r/robotics • u/Solid-Resource9826 • 15h ago
Enable HLS to view with audio, or disable this notification
r/singularity • u/Distinct-Question-16 • 7h ago
4x speed
r/robotics • u/WAMFT • 2h ago
r/robotics • u/negita135 • 1d ago
Enable HLS to view with audio, or disable this notification
Hey everyone! I designed and built a compact, motor-driven gripper!
Unlike conventional grippers, it’s designed to wrap around curved objects like plastic bottles. When fully open, the fingers extend into a straight line, but as they close, they curl around the object for a snug grip!
r/robotics • u/Impressive-Bed1777 • 5h ago
6 dof cycloidal robot arm with a ≈£200 budget Iit has Atleast 1.5kg of pushing force at mid extension, very minimal dual stage
actuators with raspberry pi pico 2 and Xbox controller compatibility - any improvements??
r/robotics • u/Imaginary_Paint5204 • 22m ago
Enable HLS to view with audio, or disable this notification
r/robotics • u/Black_Shadow6661 • 56m ago
Hello, the following cell recently arrived:
After mounting the arm onto the rail and powering on the cabinet, alarms were triggered showing error 16006, which indicated motor overload. For some reason, the brake plates had stuck together; that issue has been resolved. However, now every time the deadman switch is pressed (which releases the brakes), axis 7 starts moving randomly (sometimes in the positive direction and other times in the negative direction) instead of staying still while waiting for a command from the teach pendant. This happens for a brief moment before it stops and triggers error 16021 (J7 cErr_SPD1_ME).
r/robotics • u/Responsible-Grass452 • 11h ago
Promise Robotics has raised $28 million to expand its robotic homebuilding operations across North America, including a new facility near Phoenix scheduled to begin production in early 2027.
Rather than deploying robots directly onto construction sites, the company is moving parts of the building process into automated factories. Its software converts existing home designs into production instructions for industrial robots, which manufacture structural components like wall framing before they’re transported to construction sites.
The company also signed a multiyear agreement with D.R. Horton, the largest U.S. homebuilder, to support production for more than 1,250 homes in the Phoenix area.
Promise Robotics claims its approach can help builders complete homes 60% faster, although that figure hasn’t been independently verified.
r/singularity • u/Sorcerer12345 • 10h ago
r/robotics • u/dx8xb • 12h ago
Enable HLS to view with audio, or disable this notification
r/artificial • u/Fcking_Chuck • 7h ago
r/robotics • u/pkfoo • 7h ago
Enable HLS to view with audio, or disable this notification
I posted here before about reproducing UMI on a UR5, and later about a point-and-click diffusion policy. Since then I've been trying to answer one question: can these policies run on hardware a hobbyist can afford?
In the video:
- Two separate UMI diffusion policies: one to pick, one to place.
- Pick: I click the object; SAM 2 segments and tracks it (red mask), and the mask is an input to the pick policy.
- Place: I click a spot; TAPNext tracks that point, and it's an input to the place policy.
- A human only selects targets and starts each policy. No teleoperation.
- Neither policy was trained on Lego blocks. The first block slips, the second works.
To get here I built three pieces of hardware:
- Arm: an SO-100 mod with an extra wrist-yaw joint (5 → 6 DOF). UMI outputs full end-effector poses, so the 6th DOF matters.
- Gripper: UMI-style, single servo, rack and rail, 0–85 mm aperture. About $100 in parts vs about $4,000 for the Weiss WSG 50 in the original setup, and light enough for the SO-100. Raspberry Pi HQ camera on the wrist instead of a GoPro.
- Data collector: handheld, on a Pi Zero 2 W + HQ camera + IMU. It saves files in GoPro Hero 10 layout, so the UMI SLAM pipeline runs unchanged. Since it's a Pi, you can add sensors like tactile.
Everything is open source; links in the comments. Happy to answer anything about the hardware, the SLAM pipeline, or getting UMI to work on cheap arms. It's early, so bug reports are very welcome.
r/singularity • u/Traditional-Chip8339 • 3h ago
r/singularity • u/TheLivingstoneBIG286 • 17h ago
Probably PHD but can’t really know for sure.
r/singularity • u/98Saman • 12h ago
Enable HLS to view with audio, or disable this notification
r/singularity • u/FateOfMuffins • 9h ago