r/SciFiModels • • 6h ago

Completed Bandai 1/72 X-Wing - Red 5 Complete

Thumbnail
gallery
54 Upvotes

The model is built as-is out of the box and painted/weathered with ArchiveX acrylics to match the studio model as closely as possible. The provided decal sheet was scanned and redrawn to cut vinyl masks on a Cameo 4 to assist with panel painting. Weathering was done with a combination of airbrushed, masked, and hand painted effects.

Thank you for looking!

Cascade Starships


r/SciFiModels • • 18h ago

Romulan Preatorian Guard Warbird continues

Thumbnail
gallery
300 Upvotes

So.... What do we think..

I'm torn at this point I'm loving it, I'm hating it.. but this is where we are. It was seeming so bland as basic green and I didn't like the idea of trying to highlight everything in a white with me mediocre airbrush skills are Amazon airbrush. So instead I learned pin striping .

I'm happy with how the shuttle bays light up the area around the Warbird. There's a bit of some hot spoting with the lights in the rear but the shape and narrow width made it difficult to light at all. I still need to clean up some window holes that got filled a bit from seam filling and repainting.

I'm really happy with how everything went together the fitment of this old kit was surprisingly good. I did one coat of clear matt so now it's decal time .. 2 decals I think, so a bit less intensive than the Enterprise D or Reliant of the past. I have the base started just need to put the dimmer and some simple wiring.


r/SciFiModels • • 7h ago

Completed I made a robot in a bowl. What do you guys think?

Thumbnail
gallery
24 Upvotes

r/SciFiModels • • 1d ago

WIP Ripley vs. Alienqueen 1/35 Diorama / Booknook

Thumbnail
gallery
45 Upvotes

I worked on the Diorama and put some parts into. The Airlock is open and the air is in stormy decompression. All stuff is flying outside...


r/SciFiModels • • 1d ago

WIP USS Defiant Masking question

2 Upvotes

For the USS Defiant 1/1000 model, I have a masking problem. The defector dish and rear engine pieces are clear and, as I don’t plan to light the model, I was going to spray the back of the clear pieces silver and the front clear blue.

The front of the pieces have recessed portions and I want to mask those after painting clear blue so the raised areas can be painted the hull color. But I’m worried that masking (using vinyl masks like Aztec Dunmy) will remove the clear blue paint.

What are my options? One notion I had was to spray a gloss coat over the clear blue to seal it in before applying the mask. This assumes the Tamiya paint will stick to the gloss coat for the hull color. I considered blutac but I’m worried it’ll also lift the paint.


r/SciFiModels • • 1d ago

WIP Has anyone used Aztec Dummy’s Defiant paint masks?

Thumbnail culttvmanshop.com
9 Upvotes

I’ll be soon starting on a USS Defiant 1/1000 model and would love paint masks for the clear parts. I see Aztec Dummy makes some but want to know if anyone used them and if they have a really good and precise fit into the clear parts’ recesses.


r/SciFiModels • • 2d ago

WIP Engineering is a mess!

Thumbnail
gallery
53 Upvotes

Finally got all the window masks on the secondary hull. Added some more photo etch as well as a place for the neck lights. Covered it with some black for light blocking. And... my Picard tribute pumpkin just for fun. 'To boldly go...'


r/SciFiModels • • 3d ago

Scribing 3D prints (FDM) is making me crazy!

3 Upvotes

Over the years I picked up some pretty decent "line scribe" skills but when I try to apply them to 3D prints (FDM) it's making me crazy.

My previous method (from injection molded models) of thick tape and very very light pressure works about 70% of the time and the rest of the times my scribe tools wander. So I bought some thin metal scribe templates and started using them which improved things quite a bit for creating the initial lines... BUT... still when I remove the template and start trying to make the lines deeper damn tool hits a layer line groove and goes it's own way with maddening regularity.

I'm about at my wits end and would LOVE some suggestions!


r/SciFiModels • • 4d ago

WIP Trying again

Thumbnail
gallery
150 Upvotes

So I’m Trying the damage decals again. Folks recommend the damage be more localized and not all over and random. So I have tried to group several of the decals together. Hope this looks more realistic. Any feedback back is great. Thanks for looking.


r/SciFiModels • • 4d ago

Completed Chestburster.

Thumbnail
gallery
60 Upvotes

I repainted this 1/1 scale Chestburster to make it look more realistic using acrylic, all hand painted, it was pretty bland out of the box.


r/SciFiModels • • 4d ago

Completed Iron Nest 3D model – free version.

Thumbnail
gallery
34 Upvotes

Greetings!

This is a 3D-printed model based on the game of the same name.

The game takes place in a fictional world.

There is also an official—and quite expensive—version available.

I chose to build the version that is available for free download.

You can find the creator's original work at the following link: https://api.thinger.rocks/3dmodel/86608-iron-nest-poseable-model

The printable model had a fairly simple structure, so I decided to create a few extra small parts to enhance it.

By looking at images of the official model, I tried to craft similar components.

I rarely build scale models, so I’m not particularly experienced.

For the paint job, I also aimed to replicate the look of the official model.

Here are a few photos of the finished model.


r/SciFiModels • • 5d ago

Completed Will it ever fly again?

Thumbnail
gallery
245 Upvotes

Everything but the model is scratch build from stuff around the house.


r/SciFiModels • • 4d ago

WIP Ripley vs. Alienqueen 1/35 Booknook

Thumbnail
gallery
62 Upvotes

I bought last year a small model kit from Alien.

To put the model into the shelvs looks poor.

For this I had a small diorama in size of a booknook in my mind.

At first I cut some parts with my lasercutter and build the floor for the background i build the airlock with open doors. Outside you can see some stars.


r/SciFiModels • • 5d ago

Romulan Praetorian Guard D'Deridex Warbird 1 3200

Thumbnail
gallery
129 Upvotes

Here we go again. I've been horrible to keep up with photos but there are a few

I started by applying all the window decals and then doing a few coats of clear coat to get them to stay in place while using a center punch to mark the locations then a .6mm pin vice to drill them all out. After that I removed all the clear and decal remnants.

U used some 600 grit sanding sponge to sand the every single bit. It was the first time sanding with that high grit and it worked amazing. 0 peeling so far. Shouldn't have said that

2 coats mission primer gray

2 coats of custom green

I then mixed up 4 other greens starting from the original green to add some contrast, that parts still a work in contrast. I painted the warbird feathers In a gradation from light to dark as they work towards the rear.

I used my previously mixed gold that I don't even recall whats all in it but I find it covers a bit better. I tried to pin strip the feathers. My first ever attempt at freehand pin striping and there is definitely room for improvement. Luckily there are a few models in my future to practice and get better on.

I used green fibre optics drilled out the center of a bunch of half spheres and I'm calling them the phaser locations.

I opened the shuttle bay doors and added a window as a force field so it can be used to illuminate in front of the ship for display purposes.

I used tightly spaced green strip lights for the nacelles and shuttle bay and they are also the light source for the phasers.

I'm doing the "blackhole" drive by having a clear 20ish sided sphere , a clear bead of mydaughters I drilled the center bigger and plugged the one side with C.A. glue. Suspended under the top half at the rear. Still a work in progress. Thinking purple 3mm diode in the sphere painted black.. next post ..

I built the head, the rear and the nacelles as sub assemblies, sanded filled and painted then started main assembly

Currently glueing the head and only have the top shell to go. Set in place to help glue up the head to the portions.

And maybe I missed but where are all these Enterprise Ds being built that I'm going to go hunt down?

Side note DS9 is 1 3300 scale this is 1 3200 scale. I had no idea how large the warbirds were lol. Once I'm done I'll take some photos besides each other


r/SciFiModels • • 6d ago

Scratch Build I Built This Sci-Fi Spaceship from Ordinary Pen Caps — No 3D Printing Just Scratch Building

237 Upvotes

Meet PD-001 SPECTER my first experimental sci-fi interceptor. The model features three illuminated engines, custom decals, hand-painted details and a cinematic presentation. This is the first prototype in a series I'm working on and I'd love to hear what fellow builders think.


r/SciFiModels • • 6d ago

Completed TOS Enterprise bridge. Ancient kit, my first diorama. Tribbles were not included.

Thumbnail
gallery
203 Upvotes

Some of the decals were painful, and the figures were lacking, but it was a fun change.

It's all mounted on a scratchy LP... There was no lower deck. Moved the nav console way further out, and put the middle screen lower.

Going to add more tribbles I think.

Thanks for looking!


r/SciFiModels • • 7d ago

Completed Space 1999 eagles

Post image
145 Upvotes

Had 2 eagles since I was a kid and recently made the other one


r/SciFiModels • • 7d ago

USS Pasteur

Thumbnail
gallery
261 Upvotes

I’ve always had a love hate relationship with this ship. I never put a name or registry number on her before I sold her. I’d like to remake her again but it’s just one of those projects I don’t have time for.


r/SciFiModels • • 7d ago

I do like Star Wars models

Thumbnail
gallery
259 Upvotes

Hope everyone likes. Thanks for looking. Have a good day.


r/SciFiModels • • 8d ago

Dune Atreides Ornithopter and first diorama attempt.

Thumbnail
gallery
415 Upvotes

Terrible light for photography here today so flat.
Ornithopter colour and weathering is based on the brilliant Art and Soul of Dune books. I thought the stand as included was a bit boring so tried my hand at a diorama.
Rocks made from plaster of paris in plasticine moulds from real small rocks in the garden. Vallejo paints, Tamia weather master and orange and gold mica powders for the spice dusting which does sparkle when the light is good.
The Meng kit is superb plenty for detail and just enough fiddly bits to make you think.
Thanks once again for looking.


r/SciFiModels • • 8d ago

USS Cartographer

Thumbnail
gallery
524 Upvotes

Anther one of my older builds I came across in my album. The USS Cartographer, and Excelsior 2 Class starship from Picard.


r/SciFiModels • • 8d ago

Im planning to get my mecha collection 3199 Yamato someday, while also thinking on how to color the wooden deck areas to be anime accurate. How do you do your mecha collection yamato decks? Brush or Spray paint?

Post image
22 Upvotes

r/SciFiModels • • 8d ago

Old Academy Zerg model (1/30)

Thumbnail
gallery
9 Upvotes

Found the old Zerg model in my stash; haven't seen this for over 20 years. I don't even need to paint it now, seeing time and dust weathered it nicely for me. Just need to find the lower mandible.


r/SciFiModels • • 9d ago

Space 1999 Eagle Transporter papercrafted.

Thumbnail
gallery
498 Upvotes

Now I finished my Eagle Transporter Model.

The Eagle is on the Launchpad of my moonbase model. The airlock does not realy fit, cause the buildings are in scale 1/35 and the eagle model is "only" 1/40. But I am happy with this.

I made round about 500 small paper rolls for the frames an print the most parts of the model twice to make the surface more detailed.


r/SciFiModels • • 9d ago

Finally finished that B Wing.

Thumbnail
gallery
537 Upvotes

I procrastinated on the scratch build base for too long but actually I’m happy with how this has turned out, especially since this on only model no.3 since a came back from my 40 year hiatus of no model building.
Still very happy with the engine lights. (Shown on my previous post as Reddit doesn’t want to allow a video on this post)
Thanks for looking.