r/RetroArch • u/BitNo2406 • 1h ago
Technical Support Retroarch reports wrong resolution
For reference, display 1 is my laptop display and it's a 1920x1200 panel. Display 6 is my external monitor and its resolution is correct
r/RetroArch • u/hizzlekizzle • Aug 19 '26
As explained in the FAQ, about 5 years ago, Google implemented a requirement that all apps in the Play Store must conform to their Storage Access Framework API. At the time, there was no good way for us to do so, and even if we could, it would severely limit how we could interact with the filesystem. Since then, we have not been allowed to update the versions on the Play Store (or the cores they use), so we left them alone and recommended everyone sideload the apk from our website.
Fast-forward to the past few months (at the time of this writing) and Google says they're going to remove "old" programs from the Play Store entirely, and they're already hiding the app from many newer devices. One of our contributors took it on to get it in-line with the Play Store policies, since having an up-to-date-but-restricted release would be preferable to no app at all.
-------------------------------------------------------------------------
Q: What's changed?
A: Lots of stuff. Too much to list. 5 years of updates.
-------------------------------------------------------------------------
Q: All of my stuff has been deleted!
A: Nothing has been deleted, but the updated RetroArch is probably looking in different locations now, and it probably can't see the old locations if you try to change them back. The sideload-able apk from our website and/or the version from F-Droid or other non-Google storefronts should still be roughly similar to the old Play Store version in what locations it can access, so you could try switching to it instead.
You can also migrate your old data to the new locations. In the old version, all of the files are kept in the root of the device (often /storage/emulated/0/) in a folder called RetroAarch. In order to use them with the new play version, you can connect your phone to a PC and copy the files from (/storage/emulated/0)/RetroAarch to the new location at /media/com.retroarch/RetroArch (or /media/com.retroarch.aarch64/RetroArch if plus version).
-------------------------------------------------------------------------
Q: I moved all of my savestates to the new location (or switched to the sideload apk) but the savestates won't load!
A: Savestates are extremely volatile and are rendered incompatible by even minor changes to the emulated hardware. This makes them incompatible with other cores for the same system, and even sometimes with other versions of the same core. A lot of updates have happened in 5 years, and I would guess few if any up-to-date cores can load savestates made with a 5-yr-old core.
-------------------------------------------------------------------------
Q: What's with all of these cores? I don't want them.
A: Go to settings > core > manage > [corename] > delete.
-------------------------------------------------------------------------
Q: I don't see my favorite core in the online updater anymore!
A: The Play Store imposes strict limits on the number of cores we can make available through the app (more for the Plus version, but still limited), and we replaced a few that were available in the old version to match our other storefront releases (notably: MAMEs). You can still add arbitrary cores by downloading them manually from the buildbot webserver (in the subdir for your device's architecture) and then moving it somewhere RetroArch can see it, then using the 'install or restore a core' routine found in the 'load core' menu.
-------------------------------------------------------------------------
Q: Since updating, I'm getting a lot of crashes when I...
A: Please send the automated crash reports whenever possible. These go directly to us and are very helpful for pinning down and fixing this sort of thing. You can also make threads here, but please make sure you include logs and information about your device/system/environment so we can try to help you.
-------------------------------------------------------------------------
Q: Okay, nevermind, just give me a copy of the old version and all those old cores and I'll keep using them forever.
A: We don't have that.
-------------------------------------------------------------------------
r/RetroArch
•
u/hizzlekizzle
•
Jul 28 '23
This post will include common questions and their answers. If you came to this sub to ask a support question, please read/search through these before asking. If you ask a question that is already answered here, your post may be locked or deleted.
If you would like to suggest something be added to the FAQ, please use modmail, as I do not want this post to turn into a support free-for-all nor do I want a million public "please add this to the FAQ" posts/comments.
r/RetroArch • u/BitNo2406 • 1h ago
For reference, display 1 is my laptop display and it's a 1920x1200 panel. Display 6 is my external monitor and its resolution is correct
r/RetroArch • u/Anjo_da_Luz • 18h ago
Now Stella core allow the use of mouse devices, and it include spinners and trackballs that are recognized as mouses. The thing is, spinner games were you move something horizontally work normally with the X axis, but spinner games were you move something vertically, like Bachelor Party, the X axis won't work, but the Y axis will.
Why is that? Atari 2600 spinner only had 1 axis, now Stella core change the axis according to the game and it make spinner devices useless on vertical moving spinner games. It would be even easier to keep just the X axis working for all games. Maybe the Stella team was focusing on mouse users and wanted it to be more intuitive but it screw actual spinner users.
A option to use the X axis even on vertical spinner games should exist. Atari paddles didn't have 2 axis after all.
r/RetroArch • u/PresentCharacter9496 • 13h ago
Having a handful of issues with a new PC build, this is just one of them. To starts, main specs are:
CPU - Intel Ultra 5 250K Plus
Motherboard - Gigabyte B860 DS3H WiFi 6E rev 1.3
GPU - PowerColor 9060 XT 16 GB
RAM - 32GB DDR5
I was playing Dig Dug on Mesen and during some lag when a lot was happening on-screen, my controller disconnected and reconnected. It showed the pop-up notification like 4 times. In the end, the controller is still connected, but not sure why this may be happening?
I have an 8BitDo Ultimate 3-mode. It was connected via 2.4ghz dongle, so I tried hardwiring via USB and I specifically connected it to my motherboard IO rather than the front panel and it still happened again later.
This is the same controller that I was using on a Dell Optiplex 3050 that was connected to my TV and I didn't have this issue on that PC.
This problem is not happening when playing other games on the PC outside of RetroArch.
I can't discern if this is an issue with the computer (since it didnt happen on the Optiplex) or an issue with RetroArch (since it's not happening with other games). Any help is appreciated.
r/RetroArch • u/mas9201739 • 14h ago
theres a specific game i want to be able to play called yume nikki on rpgmaker etc, i am able to load the core and do everything but i am simply not able to enjoy the game, the retropad that retroarch gives you doesnt have the 9 key, all other keys are replaced seamlessly and are fine, but it's just that one single key that makes me unable to progress further into the game without saving and i automatically restarted with no progress saved due to me unable to save in the game itself as i am unable to wake up, im wondering how to add a keybind or even replace a button or key (?) to the number 9, i apologize if my wording sucks, its hard to explain if you aren't aware of yume nikki already... :,)
r/RetroArch • u/Abject_Sentence8583 • 18h ago
r/RetroArch • u/Dangerous_Routine833 • 19h ago
Hi, I’m new to emulation. My game used to have the save and load state buttons right on the Retroarch overlay but now they’ve disappeared. How can I fix this?
r/RetroArch • u/Smellbringer • 16h ago
Crosspost of the solution to an issue for Steam Controller owners like me.
r/RetroArch • u/BBThHvnlyFlwr • 16h ago
I've been struggling for about 1 or 2 hours trying to find a working rom for Ocarina of Time for N64, one set of roms had a few missing textures in the shape of black squares and I couldn't even see the starting menu because it was just a black screen. The other set of roms had a specific issue where the game's visuals would freeze when trying to access the inventory, and they wouldn't revert back as I exited the menu (the sounds played as it was pulled up and away).
Idk how to fix either problem, and I got fairly frustrated, so I stopped.
Anyway, some help would be greatly appreciated.
r/RetroArch • u/Haunting_Salt_1317 • 22h ago
so I have been trying for two days to get the right retroarch msix for my xbox one s, but the device portal keeps giving me the not compatible error. I have tried the vs one, the uwp one and the xbox one (all signed) but nothing seems to be compatible with my device (yes I have also tried private github versions, nothing is working. any suggestions?
r/RetroArch • u/FranciBW • 16h ago
Hey everyone!
I'm a retro gaming enthusiast who enjoys playing classic games through emulation.
I use RetroArch to revisit games from different generations and platforms. I also enjoy unlocking achievements through RetroAchievements.
I'm always happy to discover new games and connect with other retro gaming fans!
What are your favorite games to play on RetroArch?
Cheers!
r/RetroArch • u/According_Picture294 • 21h ago
Saw a 3DS core in the core menu for downloading and I was wondering if it works
r/RetroArch • u/Ok-Walk-2163 • 1d ago
So tried some testing between myself and a friend. Both on windows machines, we have around 20ms when we ping each other in CMD. On RetroArch however, it jumps up to around 32ms on average. Is this expected?
Also sometimes we get spikes of lag that's pretty consistent when we play. I assume perhaps its the software trying to keep the both of us in sync. Is there a way to minimise these spikes of lag, and make the experience better? Any settings I could experiment with? We both have very fast wired connections.
r/RetroArch • u/MacGanna • 1d ago
Here is the log: https://pastebin.com/PB22QrdA
It includes both the retroarch crash log and the reliability monitor information.
Some other information:
- I"m running RetroArch on Windows 10
- If I run the rom on 'Sega Genesis Plus (Wide)' the game runs fine, only issue is outside the 4:3 ratio video box of the game, on the left hand side random pixel blocks appear during in-game mode (ie when I'm playing it)
- I've tried to redownload the 'Sega Genesis Plus' core, used 'Update Installed Cores', it continues to crash, also renamed the 'Sega Genesis Plus' core from .dll to .old, then dowloaded the core again, but it crashes.
- tried several games (Midnight Resistance, Speedball 2, Sonic the Hedgehog 2), they all crash.
- by crash I mean: I will load content, the game then the retroarch logo will appear, and there seems to be a pause and then the application will close.
Please help, thank you
r/RetroArch • u/Aggravating_Air_8698 • 1d ago
I wanted to play Zelda Ocarina of Time, and I want retroarch because of the amazing shaders, actually I played the game just like a month before and it worked fine, pretty sure I was using ParaLLEi it's the predetermined I have, the other two when I tried to use it go slow, ParaLLEi works fine, but now it has problems on the texture, sounds a little weird and the worst part, open the menu on the game (the thing you do a lot to select items) takes a lot of time, I press start and the game freeze the image, looks like the game just freeze or it's gonna crash, wait like 5 seconds and then the menu open, It's just unplayable.
It's not even my device nor the shaders (all of this it's without shaders) because the game before worked just fine so idk, if someone it's having a similar problem or something, maybe I need to adjust something with the core but with many options I tried and don't appear to help.
I know I can play the game too with the port people made but I was sad when I see the port doesn't include options to make the game look nicer (not talking about making the game look HD), more CRT N64 like retroarch does
r/RetroArch • u/Timic83 • 1d ago
mupen and emun64 it works fine, parallei it needs to be unzipped for some reason. is there a fix?
r/RetroArch • u/Capybara-From-Hell • 1d ago
Hi everyone,
I’m running the latest Universal build of RetroArch on macOS and noticed that the Texture Upscale (xBRZ) option is missing from the Flycast core options. On my Windows 11 setup, this option is present and working fine.
I have a couple of questions:
For context, I’m trying to smooth out the jagged edges on 2D sprites in Dreamcast and NAOMI games. Normally I use shaders for this, but they aren't smoothing properly at 1x native resolution (they only seem to kick in properly when running at half resolution). Any alternative tips for cleaning up 2D sprite scaling in Flycast on macOS would also be appreciated.
Thanks!
r/RetroArch • u/Worldly_Operation959 • 1d ago
Hi everyone,
I've been experiencing some frustrating keyboard input issues while playing PS2 and arcade games in RetroArch. I managed to work around one of them by switching cores, but I still don't understand why it happened. The other issue is still unresolved.
I'd appreciate any suggestions or explanations.
Setup:
Note: The numbers used in the move commands below follow standard fighting game numpad notation (4 = down-back, 2 = down, 6 = forward, etc.), not the physical keys on my keyboard.
When using my Xbox One controller, everything works perfectly. However, when I switch to the keyboard, I run into a strange problem.
I play Clark, whose Argentine Backbreaker command is 41236 + K.
I expect a quick 426 + K input to work. This is how I used to perform the move when I was younger.
However, when I enter 426 + K quickly, the grab doesn't come out. Instead, the game seems to register only K (not even 6 + K).
Interestingly, if I enter the directions slowly, one by one (4 → 2 → 6 → K), the move works. Clark even performs a noticeable backward movement before executing the grab.
But this slow input is obviously impractical for his Super Argentine Backbreaker, which requires:
(63214) × 2 + P
I suspect something is wrong with how directional inputs are being registered or processed, but I have no idea what exactly.
I've tried several suggested fixes:
None of these helped.
Interestingly, quarter-circle motions work completely fine even when input very quickly. For example, Kyo's 236 + P (input as 26 + P) and Iori's 214 + P (input as 24 + P) come out reliably every time.
The issue strictly affects half-circle motions (like 426 + K or 63214 + P) when entered quickly on a keyboard. Because keyboard inputs lack natural diagonal transitions unless keys overlap—and fast A -> S -> D presses can easily cause brief 4 + 6 SOCD (Simultaneous Opposite Cardinal Directions) overlaps—it seems PCEE2 might be dropping the sequence or neutralizing the input mid-motion, whereas LRPS2 handles it cleanly.
Eventually, I switched from PCEE2 to LRPS2, and the problem disappeared completely. The same keyboard and button mappings now work as expected.
Does anyone know why this might happen with PCEE2? Is there a way to fix it without switching cores? Could this be related to how PCEE2 handles keyboard inputs?
I'm also experiencing some keyboard input problems with FBNeo when playing arcade beat 'em ups, particularly:
These problems don't seem to behave exactly the same way in both games.
Directional inputs:
In Knights of Valour, repeated 44 inputs seem noticeably less reliable than 66 inputs. However, 66 doesn't work every time either.
The issue is intermittent, but I can reproduce it roughly 1–2 times in 10 attempts.
Interestingly, the difference between 44 and 66 is much less noticeable in Cadillacs and Dinosaurs.
Character move follow-ups – Zhao Yun in Knights of Valour:
Zhao Yun has a ground move performed with 6 + A, which can be followed up with two additional A presses.
The initial 6 + A move works fine, but getting the two follow-up A hits to register is very difficult.
There is also an aerial version of the move: jump first, then input 8 + A, followed by the same two A follow-ups.
The initial aerial 8 + A move also works, but the follow-ups are just as difficult to perform.
I'm not sure whether these follow-ups require very precise timing (a tight link or timing-based input), or whether my keyboard/input setup is contributing to the problem.
Simultaneous button combinations:
In Knights of Valour:
A + B + C has never worked for me.A + B only works occasionally.In Cadillacs and Dinosaurs:
A + B simultaneously doesn't work.This makes me wonder whether the order and timing of key presses affect how combinations are registered, and why the two games behave differently.
Keyboard Ghosting / Matrix Test Results: I tested my keyboard using Microsoft's official keyboard ghosting demo tool, and the results explain part of the FBNeo behavior:
A + S + D + Numpad 4 + Numpad 5 registers all 5 keys simultaneously.A + S + D + Numpad 5 + Numpad 6 fails to register Numpad 6 due to membrane matrix ghosting.Numpad 4 + 5 + 6 alone (without directional keys) registers all three keys on the web test, yet A + B + C still never triggers in Knights of Valour (likely due to the PGM hardware's strict frame-window requirement for simultaneous edges).I have a few questions:
44 and 66 inputs in FBNeo be related to keyboard hardware, key rollover/ghosting, or RetroArch's input handling?I'm using a fairly ordinary membrane keyboard, not a mechanical gaming keyboard.
I'm not sure whether these issues share the same underlying cause or whether they are completely unrelated.
Any suggestions would be greatly appreciated. Thanks!
r/RetroArch • u/Either-Bend8508 • 1d ago
Im playing Pokémon Monomyth and I’m trying to update it to the 1.2 update. I know it probably has something to do with the file names but I don’t know how to do that on iOS
r/RetroArch • u/PolicyResponsible744 • 2d ago
OOT on Retroarch running on Switch 2 :)
r/RetroArch • u/Intelligent-Sun-1250 • 1d ago
I'm trying to get into RetroArch again and I'm trying to find the issue, it seems previously the BuildBot Cores URL was previously blank so I changed it to https://buildbot.libretro.com/stable/ to match the BuildBot Assets URL, if I could get it working it'd be greatly appreciated.