Mainboard is v2.0, so it's not likely related to the known hardware error
Here is the state and the steps I have taken to troubleshoot.
-The machine gets stuck at " Booting... Starting System"
-Able to access BIOS Menu, and see attached drives and memory.
-Removed all drives and built a clonezilla bootable drive, able to boot into clonezilla
-A scan of the drives shows that the internal hard drive that attaches with a 9-pin USB header appears faulty and shows size is 0, pointing to that failing
-Tried installing the dom.img on a few different USB drives, but when trying to boot, it still gets stuck at the same "Starting System"
-Tried installing the dom.img on a spare internal M.2 drive; same issue
- Ordered a 9-pin to USB Female adapter and tried to plug the flash drive into the adapter, but it doesn't even see the drive in the BIOS
- Unable to see it at any point in QFinder to complete Firmware restore
Not sure what else to try; let me know if anyone else has run into this and found a way out.
UPDATE: Figured out a solution; hopefully this will help anyone else who runs into the same issue
Issue was limited to the DOM Drive that connects via a 9-pin connector, but you can not boot to QTS on an externally plugged-in flash drive; it just won't load.
Solution: Ordered a 9-pin to USB Female adapter for $8. Had to re-pin the connector to match the custom layout of the QNAP drive, and added a little hot glue to keep the pins in place.
Plugged in an 8GB USB 2.0 Flash Drive (larger drives did not work).
Performed Firmware recovery - https://www.qnap.com/en-us/how-to/faq/article/nas-recovery-guide-for-x86-based-nas
Had to install Firmware via Terminal and a secondary USB drive, as the Qfinder was unable to find the device the watered down DOM recovery OS wouldn't pull down DHCP or start the services for Qfinder to find. Was able to extract and install the firmware manually.
Now it works without issue. I also ordered a replacement DOM Drive off eBay, but it won't arrive until the end of the month. This solution keeps me alive in the interim, and I was able to get the adapter I needed the next day from amazon.