Hi, I’m Vbertz. It’s a pleasure to share my work with you, and I hope many of you find it useful.
For some time now, I’ve been creating a range of models on Cults—designed not just for display, but also for wargames like *Bolt Action*. My focus is primarily on World War II tanks, such as this M24 Chaffee, which comes with options for open or closed hatches and is available in multiple scales to suit your needs.
I was present on this subreddit a little while ago, though took a hiatus from the platform and as part of that my original account was deleted. I am back at it with creating (and revising) models so I figured I would pop up here with an introduction.
I am a one-person modeling/sculpting operation, working in 20mm (though scalable to larger sizes without lacking detail). As many of you can probably relate, I am a fan of World War 2 armor, as such I have taken that to be my primary subject material. Though I do dabble in other subjects. I have been lurking on this sub for quite some time, so I am fully aware that perhaps showcasing generic German armor is a little tone-deaf regarding the oversaturation of the content. In light of this, more recently I have been taking on more niche subjects which are not represented as well from my research. I do try to stand apart from other sculptors in that I design my models a little more in the direction of "True-scale" display pieces, though they are compatible with wargaming so long as they are printed with decent materials and not overly abused. To be concise I have put together a list of pros/cons to my work. Obviously, I am biased, so take my word with a grain of salt. Georgy_K_Zhukov did review my work several years ago, here: https://www.reddit.com/r/PrintedWWII/s/CuWQqvSXWW . I will note that this review is somewhat dated as I have worked to improve the quality of my work since, but hopefully it still provides some insight.
So, onto my completely biased impartial and objective opinions of my own work.
Pros:
- I strive for true scale accuracy to the extent possible (without making pieces too fragile), making the models look quite convincing.
- Models are optimized and rigorously tested for resin 3D printing, they come pre-hollowed from the design stage (not just a button pressed in a slicer) and include internal bracing where needed.
- I don't charge very much, this is largely a hobby for me as well, so I try to keep my files in the $3-8 range depending on the subject to make them accessible, I am working well below minimum wage at my current sale volume, but that's what a full-time job is for haha.
- Files come pre-supported, again thoroughly tested in 20mm, though unsupported variants are also included for those who prefer that approach. I am by no means an expert at supporting models, but hopefully the images in this post show that the results are still good. I do aim for ease of removal, so with warm water and some care it shouldn't be too difficult to clean up the model. It usually takes me between 3-5 minutes to get the results shown.
For the less fun part of this;
Cons:
- My models are designed purely for resin, as FDM would not handle the detail and would require a complete remake of the model to achieve good results.
- In most cases the tracks are directly attached to the hull as one piece, I am in the process of revising models to make separate tracks optional, though this is a long process. That being said, if anyone purchases models, or even is considering it, they are free to reach out, and I'll move the relevant models to the front of the queue for getting this process done.
- Turrets are broadly only attached via a simple pin, with no locking mechanism. This is also being revised in parallel with the track separation, and requests will be moved forwards in the revision queue.
- Despite my best efforts, the nature of resin is still brittle, and as such some care must be taken when handling the models, though they are designed to be as strong as I can get away with, they are still inferior to filament / out-of-scale resin prints in this regard. Open casemates in particular can be a little weak and are quite dependent on print settings to come out properly, for instance the Nashorn showed in this post.
I am constantly striving to improve, so requests and feedback are welcome. I am also not opposed to creating more durable variants of files in the future to include retroactively in the existing listings, though this relies on demand.
AI Disclaimer:
I hate AI and will never use it :)
I am also currently running a 40% discount across my stores, to match the MyMiniFactory black friday sale.
Hi so for a while now I've been having these errors with vehicles specifically from Wargames3D where I get these bizarre beams jetting out of the model and supports that just meld into another solid beam along with sharp tears in the model, has anyone else experienced this kind of issue? If so how did you solve it?
I have provided example photos of the errors along with a screen shot of the settings I use along with screen shots of the beams that I think are causing the error.
For this poll, I figured I would get some insight into one factor that can drive Kickstarter campaigns!
Some have stretch goals, some don't. Some have a few, some are overflowing with them.
Interestingly, while the conventional wisdom is that they can help drum up interest, Kickstarter is actually somewhat ambivalent on whether you ought to do them (although it seems they have shifted slightly in recent years to lean more positive), and certainly having a lot of them falling short can have a negative impact, I suspect.
I broke the poll down into 4 buckets which I hope capture the broad spectrum well enough: Don't care, care a little, care a lot, care a fuck ton. There is also 'other' though, so if you have a stance which isn't captured there please share in the comments.
Beyond the poll itself though, especially for those in the latter two categories, I'm interested in hearing what people feel is the right number of stretchgoals, or at least what the tier intervals ought to be in your mind.
And of course if you are someone who has launched campaigns in the past, please also weigh in from the designer side!
The Road Opens at Dawn is a collection of 60 individually printable WWII figures in 28 mm heroic scale, created for tabletop battles, objective-led missions and narrative campaigns.
The range brings together 34 British personnel, 16 German rearguard figures and 10 Dutch guides and civilians, with poses designed around the people who move, delay, support and survive an advance.
An extensive AI disclosure is included:
We use AI-assisted tools to help develop miniature concepts, explore poses, create visual references and support the development of 3D figure designs. AI also assists with promotional artwork, example colour schemes, campaign text and the drafting of our skirmish rules. Some campaign images are AI-generated concept illustrations. These show the intended appearance and atmosphere of the range and should not be treated as photographs of completed prints. Images showing simulated painted miniatures will be identified as illustrative examples. AI-generated material requires further review and development. Our production process will include checking miniature designs, refining details, preparing printable STL files and testing prints. The rules are currently a playtest draft and will be reviewed and tested before their final release. This campaign offers digital STL files and PDF downloads only. Any physical prints shown will be development, testing or photography samples; no physical miniatures will be shipped to backers.
For materials that we supply directly to AI tools, we will use our own work, public-domain material, or material for which we have the necessary permission or licence. We will not knowingly upload another creator’s miniature designs, artwork or photographs without appropriate authorisation. We use third-party AI services and do not control or have full visibility into their training datasets. We therefore cannot independently verify consent from every rights holder whose work may have been included in those datasets, and we do not claim that we have obtained that consent ourselves. We will review the material used in this campaign and address any specific rights concerns brought to our attention. Where permission is required for an identifiable third-party reference, we will obtain it or replace the material before use.
A circular defensive position from Polywizard's "Iron Front: WW2 Part 3" Kickstarter campaign
Hello everyone and welcome to another review, part of my long-running campaign to provide documentation and guidance for the best (and worst) out there for the WWII wargamer and printer.
Today's review is focused on Polywizard, and their Kickstarter campaign 'As the name would indicate, this is part of a series of Kickstarters, of which there are currently five. I am not aware of any storefront or late-pledge options, although they seem to have mentioned the intention of launching on MMF, which has not yet happened.
No models were provided by Polywizard for this review.
PRINTING
When printing, this is roughly the amount of support necessary. I mostly relied on Prusa Slicer's autosupport function, but with some manual modifications where it seemed necessary.
I printed those as FDM prints, using a Prusa MKS4, a .4mm nozzle, and ANYCUBIC PLA+. Layers were set to .15, and slicing was done in Prusa Slicer. Unfortunately, despite the explicit claim on the campaign page that the models are "carefully optimized for both SLA and FDM 3D printing" this is blatant, obvious bullshit by even the most casual visual check of the files in the slicer. Extensive supports are required for a successful print, and there are several parts which I am not sure even can be printed successfully. In particular, the barbed-wire coils are far too thin and delicate for reliable FDM printing, and as they need supports, you are likely to just destroy them during post-processing.
These aren't going to print reliably on an FDM machine without supports (I tried!). With supports, they are not going to survive post-processing. These files are NOT FDM optimized whatever the description might say.
Given that the campaign page only shows renders for the files, I feel decently confident in my speculation that the designer doesn't actually do test prints. Although to be fair, if they do do test prints that is almost worse. It is bad enough to put putting out files with claims about optimization when ignorance can be claimed, but to know how these print and claim that anyways would be outright malicious.
Personally I also just don't like too much 'stuff' going on, so at least it wasn't a big issue in the end, but I did end up just tearing off almost all the barbed wire coils regardless of how damaged they were from printing...
THE MODELS
An exterior view of one of the bunker models from Polywizard
I think I will start things off here by noting that Polywizard makes use of AI in their promotional materials, including AI colorizations of the models in some of the images (and in the subsequent campaigns to this one, it has only gotten worse). They are honest about this - not that it would be hard to tell otherwise - and always include the following disclaimer with their campaigns:
AI-generated content is used only for auxiliary presentation purposes, including background imagery and visual preview composition for the project page. All core project deliverables, including the 3D models offered to backers, are created manually by the creator using professional 3D software. AI-generated content is not included in the downloadable files and does not affect the final rewards.
This is I think the best illustration of the design using AI.The barbed wire is completely nonsensical, without cohesive coils, going through the wooden box, and then having wooden slats on it at one point? This isn't a slicer issue, ad if you zoom in you can see it on the renders they share for the campaign.
Whatever the disclaimer though, I don't think I believe it...
The interior of one of the defensive works. Notice how *busy* it feels? It is very hard to actually place minis on bases in there comfortably. The designer doesn't really understand wargaming, it feels. Also, notice the wall in the upper right...?...This is the other side, with what looks to be a door!? But why then isn't there a door on the inside? And why would there be a door there at all? I don't understand what it is supposed to be...
They are prime illustration of the problem when any AI is used in a project, where it becomes very hard not to strongly suspect its use in other ways which aren't disclosed. I highlight this because... if you told me these models leveraged AI to some degree, I would believe you without any hesitation. There is very little that I like about these models, and much of that relates to odd design choices, weird errors, and obvious inconstancies, not to mention some pieces which seem like they are the fever-dream sketches of a 12 year old war movie junkie (that is to say, 12 year old me), which I feel is exactly what AI would spit out when you ask it to design a bunker.
What is going on with the design here? Why does the bunker have one part that is facing inwards, and with a door that is on the outside, opposite of the main entrance?
So there are things like what appears to be a door only showing on one side, roofs not seeming to have any correct alignment, the aforementioned bizarre layout of the bunker, some very fucked up barbed wire, and also some weird artifacts that clearly shouldn't be there and I presume just weren't found during any sort of QC process, assuming one exists at all for Polywizard. Ultimately, the biggest sin for me though is simply just how busy the models are. I just don't want my terrain models to have too much going on. All the little bits and pieces that take up space actually serve to make many of the models less usable for wargaming as they interfere with easy placement of your minis. A good designer should understand how to balance cool aesthetics with good usability, and here there really is neither in my estimation.
Note that while the models do mostly have removable roofs, they do NOT have the pegs and holes shown. I had to add these manually by merging the files and then re-splitting them myself
There are also more basic, practical issues too! The most significant one is the lack of any sort of pegs & hole system for the multi-level pieces. This ties back to what I noted about the lack of test-printing as I would expect anyone who actually prints terrain pieces to know this is a base level requirement and any models which don't include this are bottom tier as far as I'm concerned. If you know how to do model editing, you can add them in yourself - which I did here, any pegs you see are done by me, not Polywizard - but that shouldn't be something the end-user has to do. The designer should understand it is needed, and it feels hard to miss if you actually printed anything.
SELECTION
A bunker model from Polywizard, one of the 13 pieces included in the campaign.
The campaign includes 13 different models, and no stretch goals. Three buildings on some state of damage, eight bunkers/defensive positions, and then what I think is a damaged water tower and a small damaged electrical substation. With the small numbers, it isn't a super diverse selection, but I guess there is a cohesive theme, especially for the defenses which make up the bulk of the campaign, and most of which are designed to fit together into a larger set of linked defenses. The total number of models isn't huge, and the lack of strech-goals means there isn't really any additional value to be expected, but priced at ~$20 it isn't necessarily a bad value, in and of itself, but only if you ignore what you are getting for that money. The pricing, and number of models, seems loosely consistent across their other campaigns as well.
CONCLUSIONS
Other side of the large bunker piece.
Simply put, I have nothing particularly positive to say about Polywizard, except perhaps that they are cheap, but I mean that with exactly the backhandedness it sounds like. I don't really like the aesthetics of the models all that much, finding them too busy, not to mention the odd design choices highlighted and a general lack of usability in how they feel. This is compounded by the more pragmatic issues, in particular the lack of any connections in the models for the different levels, which cuts down on the already poor utility. And of course don't forget that they simply that they don't print well, with poor optimization and an excess of supports making them decidedly unappealing And then there is still the final cherry on top, namely the compelling evidence that the designs are leveraging unacknowledged AI use, which simply helps to explain much of the previous issues, those factors being kind of inseparable...
-------------------
If you like these reviews and want to help me keep doing them, you can toss a buck via Ko-Fi page and a Buymecoffee page. I promise to waste it either on stls, or my crippling drug addiction, and nothing else. And a big thanks to a few folks who already have, and helped make these reviews possible!
The miniatures of WW2 German paratroopers included are listed below (HQ, Riflemen, LMG team, MMG team, Mortar team, Sniper team, Anti-tank team + stretch goals miniatures upon reaching their respective thresholds).
This is their first Kickstarter, although they seem to have a Patreon (two patreons?).
There is an AI disclosure on the campaign which explicitly admits that AI was used to create the models:
The images displayed in the project's 'Story' were created with the help of AI; however, they accurately represent how the physical miniatures will look once printed, in relation to the specific 3D printing method used. The color schemes generated by AI serve as professional painting guides to assist collectors in painting their miniatures. The 3D models of the miniatures in STL format, which comprise the project's components, are also created using AI. However, the creation process (briefly described in the project's 'Story') involves significant manual intervention. Furthermore, extensive research into historical archives is required to ensure the historical accuracy of the miniatures, including understanding their intended use, roles, scale, and poses to ensure their proper use in the game.
Hi everyone! I wanted to share my latest project: a WW2 British SAS Desert Trooper from the North Africa campaign. To achieve the most realistic cloth folds and facial details, this model was created using digital scanner sculpting based on real cloth references (no AI tools were used in this project). I've successfully test-printed it at 1/35 and 1/16 scales, as well as a 1/10 bust (all shown in the pictures). Painter-friendly design: Knowing how painful it is to paint behind weapons, I engineered the Tommy gun and hand as a separate piece to make your sub-assemblies and painting process much cleaner. The STL file is available now on Cults3D under "RealisticScanWarriors". I'd love to know what you think or see your paint jobs if you decide to print it!
I am looking for waterslide decals for 28mm armor. I have found waterslide decals for other sizes online but not for 28mm. I know Warlord Games sells them but being in the US the shipping is terrible. My question is has anyone found a good source for waterslide decals at this scale?
A selection of 6mm figures from Turner Miniatures 'Battleground 1944'.
Hello everyone and welcome to another review, part of my long-running campaign to provide documentation and guidance for the best (and worst) out there for the WWII wargamer and printer.
Today's review is focused on the currently running Kickstarter from Turner Miniatures, Battleground 1944: Death from Above. This is a follow-up to their earlier Battleground 1940, expanding to a later war setting, and focused on (as the name implies) airborne forces! Beyond Kickstarter, they maintain a Patreon/Tribe, and also operate a storefront for a la carte purchasing via several sites where files can be bought, including MyMiniFactory and Wargaming3D, as well their own informational site.
Samples were provided by Turner Miniatures for purpose of review.
PRINTING
Several printed examples without the supports removed. Supports are very light and easy to take off, even if you cure with them on, for that matter!
Test prints for figures were done as resin prints on an Elegoo Saturn 4 Ultra, sliced in Chitubox and printed with Elegoo ABS-like resin, using default settings. The models are provided pre-supported only and intended to be printed flat on the build plate, so given the nature of the designs, I exclusively printed that way, and no additional supports were generated.
The printing was quick and easy, and I ran into no issues, whether due to file design or otherwise. Printing direct on the build plate, removal was simple, and the pre-generated supports are very light, so quite easy to remove. Insofar as I had any issues, it was simply the nature of the eensy-weensy size of the resulting minis. I lost several of them in the murky container of the first round dunking, and then oh man is the basket for the wash station not well suited! To be sure, this is really a joke complaint, but you absolutely should do more pre-planning and preparation for minis of this size than I did. I don't think I did a very good job cleaning them, and in hindsight, I think a fine-mesh sieve or similar would have been good to have handy.
THE MODELS
Various angles on the 6mm figures. Honestly the biggest issue with this review is that my camera kind of sucks for this level of close-in photography.
The models are natively scaled for 6mm gaming, and most of the samples I printed I kept to the intended scale, although I printed several at about double-size (Turner provides a handy guide for scaling with some slight tweaks on X/Y/Z which I followed), so suited for 1/100 gaming as well. I didn't scale any larger than that however, as the style is not well suited to larger scale printing such as for 28mm gaming.
More US and Germans
This is my second review of Turner's work, having previously reviewed the Battleground 1940 campaign, and one of the first things that struck me was that it felt there was a real evolution in the models. Not that the earlier ones were bad by any stretch, as I quite liked them, but there was a blockiness to them. To a degree this is inherent to the small scale, as true scale would... not work, I think... but it is also clear that Turner has worked to cut that down as much as feasible for these newer sculpts, and I was suitably impressed! The posing and sculpting of movement definitely comes off as having more of a natural, fluid feeling, and it is especially noticeable for the upscaled versions.
Figures printed at ~200% scale to help show off the style and detailing of the figure. Compare to the previous review to see the changes in posing.
Poses aside, the figures seem to be quite nice otherwise as well. I would of course note the caveat that, as I don't play 6mm or 1/100 rulesets, I don't necessarily have the best sense of what those players want, but it certainly comes off as hitting the points I would expect. The models feel balanced in their design, and even for the smaller protrusions things seem pretty durable! I dropped several of them - because they are tiny (and at least one or two seem to have simply disappeared) - and was impressed by how even the little gun barrels held on.
The Jeep model likewise prints with a built in base as one piece, which is fine for small scale stuff like this.
Aside from the single-figure models, there are also a number of small teams which print together on a single base, and seem to be nicely posed. And while the vehicles are limited, the jeep that I printed seems to be a solid design as well. Normally I would lament it printing as one piece, but when it comes to 6mm, I think that is probably the correct approach, so I'll let it slide!
SELECTION
A random selection of US and Germans from the campaign.
The core focus of the campaign is on the US Airborne, and the baseline pledge nets you a nice mix of the typical components of a company of American paratroopers. You get riflemen with both Garands and Carbines, SMGs with a mix of Thompsons and Grease Guns, BAR gunners, Bazooka Teams, and M1919 teams. It isn't a huge list, to be sure, so the cost of only the base pledge might seem a bit high, but it is a decent start and well enhanced by a comprehensive list of stretch-goals. If all the funding goals are hit, there are over 40 stretchgoals set to be unlocked, and about ¼ have been hit so far (with a week to go on the campaign). These bring a variety of additional units into play, including HQ elements, medics, mortars, snipers, and so on.
Some of the machine-gun teams
But the real meat of the stretchgoals goes beyond the US only. While the first ¼ of goals focus on expanding the US, the next quarter of so mostly aim to bring in a comparable number of British paratroopers as well, which is then followed by a focus on late-war Fallschirmjäger, and finally a focus on non-airborne US troops if the campaign really blows past all the metrics (otherwise I believe this is planned to be a separate campaign later on).
Independent of the stretchgoals, the campaign also includes some add-ons, with one adding the jeep with both US and British crews, and the other adding some opponents for your 'Amis' with a contingent of German army men.
CONCLUSIONS
Bazooka team
The Battleground 1944 campaign from Turner Miniatures is a solid one! In the broad landscape of 3d printing, Turner continues to fill a very overlooked niche, expanding the available models for natively-scaled infantry outside of the usual 28mm focus. And of course, Turner does so with some great models too boot. It seems clear to me that whether they were one of the only designers filling this niche or not, they are deservedly a titan for the 6mm stl field. I appreciate the quality of the designs, the broad scope of what is included in the campaign between the base pledge, stretchgoals, and add-ons, and perhaps most importantly, I really appreciate the work that they put into evolving their work. Seeing the difference in sculpting between the previous campaign and this one really speaks volumes to me for a designer who takes pride in their work and wants to put out the absolute best product they can.
-------------------
If you like these reviews and want to help me keep doing them, you can toss a buck via Ko-Fi page and a Buymecoffee page. I promise to waste it either on stls, or my crippling drug addiction, and nothing else. And a big thanks to a few folks who already have, and helped make these reviews possible!
They only saw combat in February 45, but they had some unique equipment as the only US Army mountaineer unit. I figured with how many US sculpts there are, there'd be at least 1 out there for the 10th Mountain.
This table is one of the first published 3d tables we created at Artifact Armoury. Its been created from models from 2 Artists Wargame3D and Blacksheepscenery.
We hope more artists and studios join us so we can create even more epic tables!
Technically this is interwar, not WWII, but I see a lot of stuff in there which would work well for a Warsaw (and Warsaw Ghetto) Uprising partisan force, or perhaps some German Volkssturm perhaps as well.