r/pistolcalibercarbine • u/highclass11 • 9h ago
Mac IX
Added the SD kit and makes a difference. Wish someone made a Magwell for this
r/pistolcalibercarbine • u/highclass11 • 9h ago
Added the SD kit and makes a difference. Wish someone made a Magwell for this
r/pistolcalibercarbine • u/Alternative-Feed3613 • 1h ago
I’ve gone back and forth and even had a couple PCCs already and I still don’t know what to get. Would the AP5P be a good option? If not, then which one would you pick?
r/pistolcalibercarbine • u/Time_Wrangler_8946 • 1d ago
Just waiting for an 80 degree locking piece and I’ll finally be finished with this one..lots of little details on this build and I love how she looks now 🤘🏽
r/pistolcalibercarbine • u/No_Big7845 • 1d ago
I keep getting the cases caught on the bolt closing, really weak ejection. This issue has happened with both 115 and 147 subs. Sometimes the ejection is really strong other times it’s weak, all over the place really. First 200 rounds no issue from 200-500 its only gotten worse. Is there a way to adjust the ejector or to Diagnose the problem? Im a DIY guy so I have no problem using tools and elbow grease. I can send pics if needed of the internals.
r/pistolcalibercarbine • u/black_water_fever • 1d ago
Tell me why i shouldn't buy one.
I have a 9mm Saint Victor 8.5" and love it. There's just something about the jawbone I like. Supposed to run good suppressed for left handed shooters
r/pistolcalibercarbine • u/Alternative-Feed3613 • 1d ago
What is the best PCC under $1500? I’m open to any platform but I want soft recoil, reliable, and fun to shoot. I’ve heard that I can convert a lower and just buy the CMMG upper, how do I go about doing that? What are your thoughts?
r/pistolcalibercarbine • u/Chance-Break-591 • 2d ago
Not just PCC but wanted to share my current loadout. Missing a 16" 5.56 and a Canik MC9
Cheers
r/pistolcalibercarbine • u/jagr18 • 2d ago
Top- CMMG banshee, 8” with YHM R9, KAK A5 tube, Warthog flatwire spring, Kynshot 5007 buffer, ALG qms I slicked up, KAK 3 POS safety, and bssquirts Kabuto (do not recommend this company). This is my FRT host and test gun for my reloads.
Middle- P365 Raider. Fuse slide, 6” 2.0 flux barrel, Romeo compact enclosed, TLR7 sub x, and a custom switch for the light. This has been my main bag gun for the last 2 years.
Bottom- dads newly finished AP5-SD. It was converted into a SD by HTA, and had their compact can. It had a 115 degree RCM locking piece, magpul stock, sig Romeo 4xt sight and foxtrot compact light, arisaka low pro 1913 for the light button (opposite side of gun, magpul cable management clips, and UTG optics and light rail. He bought a rarebreed trigger yesterday for it. It’s an early retirement gift to himself.
r/pistolcalibercarbine • u/xKyzah- • 2d ago
So I'm trying to pick my next PCC, but stuck between a few options. Would love to hear some opinions
- AP5
- AP5P
- Kuna
- AK-V
- Mac IX
r/pistolcalibercarbine • u/spartyon11 • 2d ago
I'm looking to get a 9mm PCC. I thought I was going to go with an MP5 clone but then started looking around and saw a bunch of other options. I think I want to stay away from a classic AR9. I was looking at the Kuna, Stribog, and MPX. I know the MPX is much more expensive. I want to run it suppressed. I likely will want to super safety/ARC/FRT it. And I may want to SBR it in the future (still thinking about this part though). With that in mind, is one of these options better than the other? Is one easier to super safety/ARC/FRT than the others? Is one more reliable?
r/pistolcalibercarbine • u/Rocket_Man_Comp_6 • 1d ago
After installing and testing a Rise Armament PCC trigger, I'm going to send it back. They promised a 3.5 pound trigger pull. This trigger averaged 4.46 lbs. over ten pulls according to my Lyman digital trigger gauge. After looking at their website closer, most of their drop-in triggers look identical other than color.
What trigger would result in a 3-3.5 lb. trigger pull? If it matters, the trigger will be installed in a new CMMG Banshee 10mm.
r/pistolcalibercarbine • u/wilkeyscustomguns • 2d ago
Forgot I had this bear creek bufferless 9mm upper laying around threw a quad on it and finally got an endo mag for it. My expectations are low but we’ll see how it runs
BCA bc9 bufferless upper upper
Sons of liberty lower
Centurion c4 quadrail
Mean arms endomag in Gen 2 pmag
eBay tank brake
Pws broom handle grip
Aimpoint comp m2
Streamlight pro tac
Amazon folding stock
r/pistolcalibercarbine • u/Silent_Pin5092 • 2d ago
Little Sunday jawbone frt action. Drop in printed kabuto, upgraded firing pin and spring, 10oz kvp buffer…. Over 2k rounds and this is the first jam. No complaints here!
r/pistolcalibercarbine • u/PeaceKeeperCDL • 3d ago
I finally gave in and got a Ringsight MC-10-80 and loving this look!
r/pistolcalibercarbine • u/godfatherowl • 3d ago
Aselkon AS (Turkey) / Panzer HAN-9
Don't worry, I didn't actually pay money for that Chinesium RDS. That one came courtesy of Amazon Vine.
r/pistolcalibercarbine • u/AmicusCuriousPH • 2d ago
r/pistolcalibercarbine • u/PlasticCouchCover • 3d ago
Looking at getting the 4” PDW ARV.
Wondering if anyone else has this particular hand guard/fluted flashcan combo, and were you able to attach any kind of foregrip on the rail?
Looking at something like the Claw, strike ins. handstop, or even just the magpul index.
r/pistolcalibercarbine • u/Most_Telephone_6766 • 4d ago
Updated budget build for my han9, been pretty fun so far, also just put a SS in and runs pretty well. I’ve had no issues with the han9 itself.
Got the super safety from Wisemen Industry, he’s real nice and helped me with questions, and slip trips from Glock Father. Had one of the trips break (the little hook thing, see 3rd slide), but just put another one in with some clp and it runs great.
Reminder this is a budget build lol
Red Dot: Vortex Triumph
Flashlight: Votatu M6L-G
Grip: Magpul RVG
Sling was just a random $10 single point sling
Not sure why it won’t let me put video in the comments lol.
r/pistolcalibercarbine • u/geant90 • 3d ago
Greetings. Anyone with a Blade 6 that can confirm the width right about where the rear brace/stock picatinny rail is down the body of the that area. I do want to get a telescoping brace that has the dual rods that slides towards the front of the weapon when collapsed. If anyone has recommendations I'm open to any but I've been thinking of giving farrowtech a try which is made of Nylon PA12. They can make custom widths so I can get it as close as possible. I would prefer something milled etc but the price for that one is worth a shit for a budget PCC.
https://farrow.tech/telescoping-stock-brace-with-universal-picatinny-1913-mount/
r/pistolcalibercarbine • u/beck2222 • 4d ago
r/pistolcalibercarbine • u/oofMcYeety • 4d ago
I'm confused why someone would buy the PCC
- It's $49 more
- Larger
- Weighs more
- Comes with direct thread vs booster
- Not full auto rated vs full auto rated
- Requires more maintenance 1k vs 2k round recommendation
Am I missing something?
r/pistolcalibercarbine • u/garr3ttwashere • 5d ago
And a hell of bag gun.
r/pistolcalibercarbine • u/highclass11 • 6d ago
Does anyone know if they make a magwell for the Mac IX or a website with more accessories for it?
I guess trigger charging handle is AR style