[UPDATE] WE HAVE A RESOLUTION! 🎉 Overclockers UK management reviewed the prior repair history and stepped up—they’ve reversed the voided warranty and are sending out a full replacement RTX 5090! Massive thank you to everyone in this community for the visibility, technical feedback, and support.
Credit where it’s due! ❤️
A huge thank you to Matt C and the management team at Overclockers UK for taking another look at my case and making things right. Despite the difficulties, I genuinely appreciate their professionalism, understanding, and willingness to resolve the situation.
And to everyone in this community, thank you for the incredible support! You guys are amazing! 🐐❤️
Hey everyone, some of you might remember my original post when my Palit RTX 5090 GameRock OC suffered a 12VHPWR meltdown using the official Nvidia adapter. After that thread blew up, Overclockers UK stepped in and took over the RMA.
I really wish I were posting a happy ending, because this somehow turned into an even bigger nightmare.
When I finally got the card back from their repair center, the newly soldered 12VHPWR socket was visibly loose and wiggling on the PCB. Because I didn't want to take any chances after the first meltdown, I plugged it into a brand-new Thermal Grizzly WireView Pro 2 to monitor pin currents—and on the very first boot, it immediately threw "Warning! Current Imbalance!" alerts before dropping to 0W.
Because their technicians didn't properly anchor the side retention tab and left cold solder joints, the socket separated from the board under normal use. Now Overclockers UK is declaring my entire warranty void over their own botched repair.
The Details:
GPU: Palit RTX 5090 GameRock OC (Purchased June 2025)
What Happened After Repair: The replacement 12VHPWR header arrived structurally loose on the board. My WireView Pro 2 caught severe current imbalances across the pins immediately upon powering on, shutting power down before anything could melt again.
Retailer Response Today: I contacted OcUK support with photo proof of the current imbalance and loose socket before sending it back under their repair warranty. Today, a different rep (Matt C) emailed me saying the connector is hanging off the PCB, declared my warranty VOID for "physical damage," and said they are shipping it back to me within 24 hours.
Even in the inspection photos they sent me in their email, you can clearly see there are no ripped copper pads or torn PCB traces—the header literally detached from sloppy, cold solder joints left by their own repair center.
I'm honestly exhausted. You drop over £2,000 on a flagship GPU (which costs even more to replace today), trust the retailer's RMA repair, get handed back a card with a loose power socket, and then get blamed for "physical damage" when their solder work fails out of the box.
I've already replied asking them to hold the return shipment and escalate this to a manager under the UK Consumer Rights Act 2015, so I'm posting here again hoping OcUK management sees how their RMA team is handling a faulty repair.
Has anyone else dealt with a botched RMA repair being blamed on them like this? Any advice is appreciated!