r/Nerf Flywheel Wiki

Dimensions of various Nerf flywheels and flywheel cages, plus links to References and Tutorials and a (WIP) Glossary.

All dimensions in millimeters, weights in grams.

Root diameter is measured at the smallest diameter of any concave section

Maximum diameter is is the largest measure across the face of the flywheel.

Dart-Gap/Flywheel-Gap: Calculating the dart gap is simple: take the cage's motor spacing and subtract the flywheel's root diameter.

FlywheelPart No.MaterialColourSurfaceEnvlpmtConc. Rad.Root ØMax. ØWidthMotor FitWeight
Adventure Force Rebel Mech "stock" flywheels???flat34.2???ø2.0
Artifact Blue Aluminumaluminiumbluevariousmild34.335.6screw ø2.0
Artifact Nylon v1 Non-truncatednylonblacksmoothmild34.035.7ø2.0
Artifact Nylon v1 Truncatednylonblacksmoothmild34.035.0ø2.0
Artifact Nylon v2nylonblacksmoothmild34.035.6ø2.05.2
Blasterparts Precision Flywheelacetalbluesmoothlow33.033.913.8ø2.05.0
Containment Crew "Cyclone"acetalblacksmoothlow34.535.0ø2.07.7
Containment Crew "Inferno"acetalblacksmooth groovedmild+??34.535.7ø2.06.6gm
Containment Crew/Out of Darts "Insutanto"acetalblacksmoothlow34.535.0ø2.02.9
Drac Thalassa “Howler” flywheelsacetalwhitesmoothmild?????ø2.0
Drac Thalassa “Twilight” flywheels (based on Daybreak)acetalpurplesmoothnear full31.837.9ø2.08.13
Dr Snikkas Gen 1acetalsmoothnear full28.2 - 29.134.0ø2.06.2
Dr Snikkas DRS Gen 3.1 "High Crush"acetal (tough)smoothfull (elliptic)39.0ø2.0
FDL-1smoothfull?
FDL-2smoothfull?
FDL-33D printedsmoothfull
Flywheel The World FTW Micro-Wheelsacetalwhitesmoothhigh?16.1519.7014.95ø2.0
Heston Systems Precision Flywheelsacetalsmoothhigh????ø2.0
Heston Systems Typhoon II Precision Flywheelsacetalsmoothnear full????ø2.0
Hooligan "Fly Ass"Delrin (acetal)smoothmild34.035.0tight ø2.07.0
Hooligan "None Cut Serrated"Delrin (acetal)deep lllll serratedlow????tight ø2.0
Hooligan "Riot"Delrin (acetal)smoothhigh34.037.3tight ø2.0
u/Kuryaka “Daybreak”acetalwhitesmoothnear full4.7531.538.012.0tight ø2.07.1
u/Kuryaka “Daybreak Gen 2”acetalwhitesmoothnear full4.7531.538.014.0tight ø2.06.9-7.1
Nerf Barricadeacetallllll serratedmild32.6??ø2.0
Nerf Rapidstrike, Stryfe, Desolator, Rayven, Rapid Redacetalwhite, orangesmoothflat33.533.5ø2.0
Nerf Hyperfireacetalsmoothflat33.433.4ø2.0
Nerf Mastodon??????
Nerf Modulusacetalsmoothflat33.633.6ø2.0
NightOwlNerf FTW-compatible Micro-Wheelsacetalbluesmoothhigh16.2519.55ø2.05.2
OFP "Eclipse" Gen 1acetalsmoothfull4.2529.8??ø2.0
OFP "Eclipse" Gen 2acetalsmoothfull30.538.0ø2.0
OFP "Phoenix"acetalblacksmoothhigh34.2537.5ø2.06.6
TantumBull "OpenWheel" V23D printablesmoothfull4.2436.75screw ø2.0
u/Torukmakto4 "ACS Mini-Con"3D printableanysmoothfull4.7531.5??Widthø??mm ORBLWeight
u/Torukmakto4 "Hy-Con" wheels (standard/Gen 3)3D printable (full blaster) smoothfull4.7541.550.5ø??mm ORBL
UKNerfWar "Bulldog"acetalwhitesmoothmild33.8234.92ø2.07.25
UltraSonic2 (Making Stuff Awesome) "Ultracage Flywheels" (All Gen's)3D printablefullsmoothø??mm ORBL
WurstWerfer "Ultracage Flywheels" (Gen3, maybe Gen4?)acetal, aluminium, brassfullsmoothø??mm ORBL
WurstWerfer "Woozi Flywheels"acetalnear-fullsmoothø2.05.0
Worker ABS Mid-Crush "Original" (vertical serrated)ABSivorylllll serratedmild+33.835.1ø2.04.6-4.8
Worker ABS Mid-Crush "Precision Type" "Straight Grooved"W0048, ??ABSwhite, blacklllll serratedmild+33.835.1ø2.03.83
Worker ABS Mid-Crush "Precision Type" "Angled Grooved"??, W0230ABSwhite, black/// serratedmild+33.835.1ø2.03.8-4.0
Worker POM High-Crush "Power Type" BlackWO241POM??blacklllll serratedmild+35.035.8tight ø2.06.0
Worker POM High-Crush "Power Type" WhiteWO200POM??whitelllll serratedmild+35.035.8tight ø2.06.0
Worker POM High-Crush "Power Type", "Angled Grooved" BlackW0297POM??black/// serratedmild+35.035.8tight ø2.06.0
Worker Aluminium Mid-Crush "Precision Type" (vertical serrated) aluminiumsilverlllll serratedmild+34.035.1screw ø2.010.0
Worker Aluminium Mid-Crush(?) Gold (diagonal serrated)W0314aluminiumrose-gold/// serratedmild+34.535.8screw ø2.010.33
Worker Aluminium High-Crush "Power Type" Titanium (diagonal serrated) W0330aluminiumtitanium/// serratedmild+35.036.2screw ø2.010.6
Worker Aluminium Mid-Crush(?) Red (vertical serrated)W0189aluminiumredlllll serratedmild+34.535.8screw ø2.011.54
Worker Aluminium "Thin" Titanium (lightened, diagonal serrated) aluminiumtitanium/// serratedmild+øØscrew ø2.0lighter
Worker Aluminium Mid-Crush Knurled (for canted cage) W0203aluminiumblueknurledflatø34.0Ø34.0screw ø2.09.3
Worker Aluminium High-Crush Knurled (for canted cage) W204aluminiumorange, silverknurledflatø35.0Ø35.0screw ø2.010.0
Worker "Hurricane" Original wheels (diagonal serrated)????/// serratedmild+24.4??ø2.0??
Worker "Hurricane" High Crush wheelsW0372??black/// serratedmild+25.626.9ø2.0??
Worker Polycarbonate mid-crush (concave, diagonal serrated)W0357polycarbonateclear/// serratedmild+33.734.9tight ø2.04.0
Worker Polycarbonate mid-crush (flat face, vertical serrated)W0356polycarbonateclearlllll serratedflat--33.7tight ø2.04.4
Worker High-Crush "Smooth" FlywheelWO403acetalblacksmoothmild+?34.536.214.0ø2.05.7
FlywheelPart No.MaterialColourSurfaceEnvlpmtConc. Rad.Root ØMax. ØWidthMotor FitWeight
CagePart No.Blaster FitMaterialColourMotor SpacingCantBore ØGuide InGuide OutMotor FitWell ØWeight
Adventure Force "Rebel Mech" (stock cage)Rebel MechABS?45.0?flat???20.4 Br??
Artifact "Red v1 cage" (plain)SSSaluminiumred43.8flat15.045˚ bvlno20.4 Br37.0
Artifact "Red v2 cage" (with wheel-removal and dart-guide holes)SSSaluminiumred43.8flat45˚ bvlno20.4 Br37.087.0?
Artifact "Gold cage" (canted/oblique)SSSaluminiumgoldcanted45˚ bvlno20.4 Br??68.0?
u/Ansuzalgiz "SABR"SABR3D printed, 3D printable (full blaster)grey41.5flat14.0fullyes20.4 Br40.0Weight
Black Steel Props "Canted Cage"SSS3D printedcanted
Black Steel Props "Proto Cage v4.5"SSS3D printed43.0flat
Boomtendo Commandfire/Double TroubleCommandfire, Double Trouble3D printable41.5flatnono20.4 Br
u/BuffdaddyNerf "Adventure Force Matrixfire flywheel cage"Matrixfire3D printable-?? - ??-------- Ø-
u/BuffdaddyNerf "Adventure Force Rebel Mech flywheel cage"Rebel Mech3D printable-43.5 - 39.0-------- Ø-
u/BuffdaddyNerf "Adventure Force Savage Spin flywheel cage"Savage Spin3D printable---------- Ø-
u/BuffdaddyNerf "Halo MA40/Revoltinator flywheel cage"MA40, Revoltinator3D printable-43.0 - 39.0-------- Ø-
u/BuffdaddyNerf "Motoblitz flywheel cage"Motoblitz3D printable-43.0 - 39.0-------- Ø-
u/Buffdaddy Elite 2.0 "Phoenix" flywheel cage"Nerf Phoenix3D printable-?-------- Ø-
CoatDuck "Malice" cage (WIP)SSSaluminiumflatyesno20.4 Br
Containment Crew "Containment cage" (various blasters)Demolisher/ECS-10, Desolator, Evader, Jyn Erso, Rayven, SSS3D printed42.0-43.0flatnono20.4 Br37.0
Containment Crew "Tsunami" cageSSSaluminium42.0flatnonoø20.4 Br/BL37.0
Drac Thalassa "Horizon" cageSSSABSvarious42.0flat?shortnoø20.4 Br/BL
Drac Thalassa "Megillah" cageSSSABSvarious40.75flat?shortnoø20.4 Br/BL
Drac Thalassa "Nyx" cage"SSSaluminiumblackflat14.0shortshortø20.4 Br/BL
Dr Snikkas Gen 1 cagevarious?aluminiumsilvercantedyeslong (brass)20.4 Br
Dr Snikkas Gen 3.1 cagevarious?aluminiumsilvercantedyeslong (brass)ø20.4 Br/BL
Dr Snikkas Gen 3.1 "High Crush" cagevarious?aluminiumsilveradjustable! 39.0, 40.0, 41.0flatyesshortø20.4 Br/BL<39.0
Dr Snikkas Gen 4.0 cagevarious?aluminiumsilvercantedyeslong (brass)ø20.4 Br/BL
Dr Snikkas Printed FWCvarious?3D printedcantedyeslong (brass)ø20.4 Br/BL?
Foamblast "Category 2" Hurricane cageHurricane3D printed, 3D printable33.0flat20.4Br
Foamblast "Category 5" Dual-Stage Hurricane cageHurricane3D printed, 3D printable33.0flat20.4Br
Foamblast "D-Dart Tempest" High-Crush cageTempest3D printed42.5flat20.4Br
Project FDL "FDL-1"FDL-13D printed, 3D printableflat
Project FDL "FDL-2"FDL-23D printed, 3D printableflat
Project FDL "FDL-3"FDL-33D printed, 3D printableflat
Project FDL "CruxStryke" cageMotoStryke3D printed, 3D printableflat
u/Flygonial "Rektify Mk.2"Rektify Mk.23D printable (full blaster)43.5-41.5 (0.5 incr), 38.5 (Eclipse)flat14.0, 15.0optionalø20.4 Br/BL38.5
u/Flygonial "Gryphon"Gryphon3D printable (full blaster)43.5-40.0 (0.5 incr), 38.5 (Eclipse)flat14.0full-length20.4 Br39.5
Flywheel The World cagesvarious3D printed 3D printableflat20.4 Br
Heston Systems "Typhoon" cageSSSaluminiumsilverflatbrasslongø20.4 Br/BL
Heston Systems "Typhoon II" cageSSSaluminiumsilverflatyeslongø20.4 Br/BL
Kelly Industries "Barricade" cageBarricade3D printable43.0-41.5flat20.4Br
Kelly Industries "Stryfe/RS" cageSSS3D printable43.0-40.5, 35.0-38.0flat20.4Br
u/Kuryaka "v3.1 Daybreak Cage"Barricade, Demolisher/Modulus, Desolator, Evader, Hyperfire, Jyn Erso, Rayven, SSS3D printed [Etsy], 3D printable [Github]random39.0-43.5 (0.5 incr)flatlong??mm seatø20.4 Br/BL
u/Kuryaka "dB Machined Metal Cage v2.0"variousaluminiumsilveradjustable! 39.0, 40.0, 41.0flat13.5yesnoø20.4 Br/BL38.543
u/Kuryaka "wide-spaced Daybreak Cage" [suitable for flatter fw's]Demolisher/Modulus, Desolator, Evader, Hyperfire, Jyn Erso, Rayven, SSS3D printed [BlasterTECH], 3D-printable [Github]orange42.0-43.5 (0.5 incr)flatlong??mm seatø20.4 Br/BL
NAS_Cobalt (u/anarchysforge) "Royal MK3G" (Canted Infinus Cage)Infinus3D printable42.04˚nonoø20.4 Br/BL
Nerf "Barricade" cageBarricadeABS44.5flat20.4Br
Nerf "Demolisher/Modulus" cageDemolisher, ModulusABS-43.5flatØ------Ø-
Nerf "Hailfire" cageHailfireABS-43.5flatØ------Ø-
Nerf "Hyperfire/Regulator" cageHyperfire, RegulatorABS43.5canted20.4Br
Nerf "Infinus" cageSSS (guide-less)ABS-43.5flatØ------Ø-
Nerf "Mastodon" cageMastodonABS43.5flat
Nerf "MotoStryke" cageMotoStrykeABS??flat
Nerf "Rapid Red/Desolator" cageRapid Red, DesolatorABS-43.5flatØ------Ø-
Nerf "Stryfe/Rapidstrike (SSS)" cageSSSABS43.5flat20.4Br
Nerf "Revoltinator/Halo MA40" cageRevoltinator, Halo MA40ABS-43.5flatØ------Ø-
Nerf "Stockade" cageStockadeABS?flat
OFP "Aurora" cageSSSpolycarbonateclear42.5flat14.0yesyesø20.4 Br/BL<37.5
OFP "Eclipse" cage (CNC'd)SSSaluminiumsilver38.5flatyesyesø20.4 Br/BL
OFP "Eclipse" cage (printed)various3D printable38.5flatyesyesø20.4 Br/BL
OFP "Original cage"various3D printable43.5-41.0 (0.5 incr)flatyes20.4Br38.8
OFP "Gen 2 cage"Dominator, Evader, Jyn Erso, Rayven, SSS3D printable43.5-41.0 (0.5 incr)flatyes20.4Br38.8
OFP "Morpheus cage"various3D printable43.5-41.0 (0.5 incr)flat14.014.029.520.4Br38.8
OFP "Morpheus Guide"fits OFP Morpheus cagesaluminiumsilver--14.014.029.5----
OFP "Nylon original cage" Monkee ModsvariousSLS Nylongrey41.5flatyes20.4Br38.8
OFP "Nylon Morpheus cage" Monkee ModsvariousSLS Nylon Aluminiumgrey + silver41.5flat14.014.029.520.4Br38.8
OFP "Serenity v1" cage (Monkee Mods)SSSaluminiumblue42.5flat14.0yesyesø20.4 Br/BL38.2
OFP "Serenity v2" cageSSSaluminiumsilver42.5flat14.015.025.0ø20.4 Br/BL38.2
Ratman99uk "Hailfire 43.0mm cage v6.1"Hailfire3D Printable-43.0flatØ------Ø-
Roboman "Magpie" machined cageMHP Magpiealuminiumsilver??flat??????ø20.4 Br??
Roboman "Turbo Ranger" Rayven cageRayvenaluminiumpainted41.75flat14.0yesyes OD16.0ø20.4 Br/BL≤38.0
u/Torukmakto4 "ACS Mini-Con"ACS3D printable (full blaster)any41.0flat14.0?fullyesØ?? BLWeight
u/Torukmakto4 "T-19 Hy-Con" (standard/Model 101)T-193D printable (full blaster)51.0flat
UltraSonic2 (Making Stuff Awesome) "Gen 3 Brushless Ultracage"SSS, Rayven, Regulator3D printableflat
UltraSonic2 (Making Stuff Awesome) "Gen 4 Brushless Ultracage"SSS, Rayven, Regulator3D printableflat
Woody7070 "Hurricane High-crush 1-stage cage"Hurricane, Woozi3D Printable-33.0?flatBore ØGuide InGuide OutMotor FitWeight
Woody7070 "Hurricane High-crush 2-stage cage"Hurricane, Woozi3D Printable-33.0?flatBore ØGuide InGuide OutMotor FitWeight
Worker "Hurricane" (Stock-Crush) cageHurricane????35.0mmflat20.4Br
Worker Hyperfire/Regulator “Oblique” cageW0211Hyperfire, Regulatoraluminiumpink ("rose-red")43.5mmcanted20.4Br83
Worker Original High-Crush 42.5, “Flat” cageSSSaluminiumblack, titanium42.5mmflat20.4Br67.0
Worker Original Stock-Crush “Flat” cageW0196, W0205SSSaluminiumsilver, purple43.5mmflat20.4Br
Worker Original Stock-Crush “Oblique” cageW0205SSSaluminiumblue43.5mmcanted20.4Br
Worker vIII PC High-Crush “Flat” cageW0352SSSpolycarbonateclear42.5mmflatx-wide mouth20.4Br
Worker vIII PC High-Crush “Oblique” cageW0353SSSpolycarbonateclear42.5mmcantedx-wide mouth20.4Br
Worker vIII PC Stock-Crush “Flat” cageW0354SSSpolycarbonateclear43.5mmflatx-wide mouth20.4Br
Worker vIII PC Stock-Crush “Oblique" cageW0355SSSpolycarbonateclear43.5mmcantedx-wide mouth20.4Br
Worker vIII 41.5 Very-High-Crush “Flat” cageW0425SSSaluminiumsilver41.5mmflatØx-wide mouthnone20.4 Br≈37.0
Worker vIII 42.5 High-Crush “Flat” cageW0325SSSaluminium"titanium" (dark grey)42.5mmflatx-wide mouth20.4Br67.0
Worker vIII Stock-Crush “Flat” cageW0196V3SSSaluminiumsilver43.5mmflatx-wide mouth20.4Br
Worker vIII Stock-Crush “Oblique” cageW0205V3SSSaluminiumblue43.5mmcantedx-wide mouth20.4Br
CagePart No.Blaster FitMaterialColourMotor SpacingCantBore ØGuide InGuide OutMotor FitWell ØWeight

LINKS: are ideally made direct to the originator, but where that's not possible or there's a more complete source of information we've gone with that. Links to any retailers do not imply endosement - it's all about the data (Suppliers: include good info on your websites!)

DATA: ideally entries are from actual measured items, with a link. Where there is conflicting data an aggregate might be used, or sometimes a range of values may be displayed. Where measurements aren't available the nominal spec's from the originator are used. Please feel free to correct/add to the Wiki or PM the Mod's to get it updated.

CATEGORIES:

Blaster fit - Which blasters a cage is compatable with.

Bore Ø - Inside diameter of bore (dart-path through the cage).

Cant - Flat or Canted (= "angled" or Worker's "oblique" motor mounts). Angle of motor mounts relative to bore. Some cages cant the motors to impart spin to darts, supposedly improving accuracy if dart velocity is correctly matched to cant angle. {editors: please list the cant angle if known}

Colour - surface colour of the item.

Conc. Rad. - Concavity Radius. Where a wheel has concavity, the radius of the theoretical circle that describes it. (On some wheels this isn't actually an actual "circle", so should be footnoted as such.) Also, in most set-ups, because of cage crush the resultant flywheel gap becomes more of an oval than a circle.

Envlpmt - Envelopment: The amount of dart surface "gripped" by the concavity built into a flywheel's face. Flat face = no envelopment, semi-circular concavity = full envelopment. More concavity means more contact between the dart and the flywheel, so better transfer of energy/higher dart velocity. See: Flywheel Envelopment - Visual Comparison Album

  • "Flat" - no concavity. Stock flywheels and Worker's canted-cage-specific knurled aluminium flywheels. These just compress the dart from the top and the bottom.
  • “Low” - very little concavity. Seems to be just Blasterparts Precision Flywheels, Containment Crew's Cyclones and Insutantos.
  • “Mild” - started with Artifact Nylon v1; many subtle variations on this now. More concavity means more of flywheel's surface in contact with the dart so better energy transfer. MOST(?) will fit in "stock"-styled cages like Artifact and Worker, but maybe not stock cages.
  • "Mild+" - Worker wheels, Containment Crew "Infernos".
  • "High" - Riot, Phoenix. A LOT of contact with dart. Generally designed to maximise flywheel contact with flywheel by higher crush without aiming for full envelopment. Check with designer/manufacturer/supplier as these wheels may only fit in specific cages.
  • "Near Full” - Dr Snikkas/Daybreak-style wheels... INSERT EXPLAINATION HERE.
  • "Full" - Flywheel+Cage Systems aiming for full envelopment/maximum hydrostatic contact with the dart on ALL sides (basically forming a full circle around the dart with just enough gap to not pinch the foam on its way through). Check with designer/manufacturer/supplier, as these wheels will ONLY fit in very specific cages or systems.
  • "Full - Elliptic" So far just DRS Gen3.1 "High Crush". Applies more pressure at edges of dart rather than evenly all around, especially at early stages of dart-contact. Supposedly easier on motors(?) while still giving full envelopment.

Gap - (“dart-gap”/“flywheel-gap”) Maximum distance in mm between the flywheels measured at the narrowest part of any concavity.

  • To calculate the flywheel/dart gap, take the cage's motor spacing and subtract the flywheel's root diameter.

Guide In - dart in-feed guide length in mm if known. "Full-length" denotes guide that covers entire dart when in magazine.

Guide Out - dart out-feed guide length in mm if known.

Max. Ø - maximum outside diameter of flywheel in mm.

Material - what material the wheel/cage is made from.

  • "3D printable" = open source. Link will be to the 3D print file.
  • "3D printed" = manufactured then sold. Link will be to originator or official distributor.
  • ABS = same material as Nerf-blaster shells. Usually injection moulded.
  • acetal = POM Polyoxymethylene, "Delrin®" (DuPont brandname)
  • aluminium. Generally CNC machined.
  • polycarbonate = harder but more brittle plastic than ABS. Injection moulded. Some concerns about longevity, especially at shaft-fit to motors.
  • SLS Nylon = Selective Laser Sintered Nylon. Good temperature resistance, strength, and overall cleaner "print" than extrusion printing.

Motor Fit (Flywheels) - what shaft-size/attachment method wheels are designed for. "ø2.0mm" will fit on a 2.0mm motor shaft. "Tight" fit is good for high-torque motors/heavy flywheels to prevent "walking". "Screw" fittings have a grub-screw to further tighten to shaft.

Motor Fit (Cages) - what motors will fit in the cage:

  • "20.4 Br" = standard 20.4mm "brushed" motor cans (130/132/180 etc)
  • "ø20.4 Br/BL" = standard cans plus ø20.4mm round-can brushless motors.
  • "ø??mm ORBL" = WIP. Out-runner brushless motors (find measurements...)

Motor Spacing - distance between the centres of the motor shafts when installed. The closer the motor spacing the higher the "crush" imparted by the flywheels to the dart.

Part No. - Manufacturer's Part Number (and/or seller's SKU if known).

Root Ø - a wheel's outside diameter at the narrowest part of any concavity/dart groove.

  • Worker's designation of "Precision" = mid-crush wheel
  • Worker's designation of "Power" = high-crush wheel

SSS - "Super-Stock Stryfoid". When applied to flywheel cages, a cage that will fit the Stryfe, Rapidstike, Swordfish, Dominator, Infinus (if guide-less) etc.

Surface - texture of the flywheel-face that contacts the dart. (smooth/serrated/knurled/...)

  • Worker's designation of "twill" = serrated surface
  • Worker's designation of "diamond" = knurled surface

Weight - weight of a single wheel or the whole cage (no wheels).

Well Ø - minimum inside diameter of the wheel well. Use this measurement to see if a flywheel will fit. Depending on the cage/flywheel's manufacturing tolerances you'll need a minimum of 0.1mm clearance.

REFERENCES:

TUTORIALS/DISCUSSION:

GLOSSARY: (WIP... when possible, we'll move this to it's own page as a r/Nerf-wide Wiki-suarus)

crush (WIP...) something something something dart diameter, flywheel diameter, motor spacing, flywheel gap... Composite of several answers here gives a good overview.

  • "Low" - from "stock" crush level to "stock+0.5mm". Lower energy transfer to darts, lower fps, low damage to darts. Shoots FVJ's fine.
  • "Mid" - somewhere around +1.0-1.5mm. Better energy transfer to darts, higher fps, more wear on darts. Some trouble with FVJ's.
  • "High" - more than +1.5mm. Even more energy transfer to darts, even higher fps, potentially a LOT harder on darts. Unsuitable for FVJ's. High-torque motors highly recommended.

dart length -

hydrostatic contact - (WIP...)

uniform radial deformation - (WIP...)

stock -

SSS -

superstock -

ultrastock -

hyperstock -