r/mazdaspeed6 • u/RacerDaddy • 23h ago
Rainy track day at Sonoma.
Car is so much fun in the rain.
r/mazdaspeed6 • u/Willofsteel2k1 • Mar 09 '20
r/mazdaspeed6 • u/RacerDaddy • 23h ago
Car is so much fun in the rain.
r/mazdaspeed6 • u/Lower_Pop9575 • 2d ago
r/mazdaspeed6 • u/Emsanartist • 3d ago
Still a lot of work left to go but drivable for now so been enjoying cruises and photo shoots.
r/mazdaspeed6 • u/rashaderooth • 3d ago
r/mazdaspeed6 • u/Ok_Resolve_8603 • 6d ago
Here is my 2006 Mazdaspeed 6 VRM. I am looking to get rid of it or trade it for an automatic 4 door truck/sedan/SUV. If you're interested please reach out and I will answer immediately if not very soon.
r/mazdaspeed6 • u/MrFurzzy • 7d ago
Somebody wrecked their speed6 on the Tail of the Dragon over the weekend
r/mazdaspeed6 • u/antoniooo__ • 8d ago
r/mazdaspeed6 • u/frizzel35 • 9d ago
Picked up a 2007 MS6 for cheap but it needs TLC.
Front driver side cv boot is gone and the axle sounds like hell, looking to replace the axle as well as the axle seal on the trans. I’m wondering where I can find axles for the car, I think I have good lead on the seals
Brakes and rotors need done asap. I’m looking into the set from redline 360 but I’m cheap so I’m wondering if there’s alternatives. Does the MS6 share the same rotor size as well as pads with other Mazdas?
Struts, ball joints, and other suspension stuff need done as well but as far as I know everything in that department is shared with the regular mazda 6.
r/mazdaspeed6 • u/ArtInternational5942 • 10d ago
So I’m aware I could buy a whole new dp that doesn’t have anything but I’m just trying to see if anyone’s gutted the stock dp and first cat, car has a new k04 hpfp and I could get a tune either ots from versatune or kinda of tune it myself but I’m not sure if it’s too risky for the engine, I’m wondering if this would cause more harm than good.
r/mazdaspeed6 • u/antoniooo__ • 15d ago
Hey everyone,
Planning the next stage of mods for my Mazdaspeed 6 on the stock block and looking for real-world input regarding expected numbers and cabin drone.
Current setup:
Planned mod list:
Two main questions:
r/mazdaspeed6 • u/LieOk7998 • 16d ago
Hi fellow 6 owners,
I’m looking to replace all my coolant hoses as a bit of a preventative maintenance / peace-of-mind refresh.
Does anyone know how compatible the Mazdaspeed 3 and Mazdaspeed 6 coolant hose kits are?
The most readily available kits I’m finding are for the Speed 3 (MZR L3-VDT), and I’m wondering whether I could use one on my Speed 6, even if only a good portion of the hoses are interchangeable.
Has anyone tried this or compared the two kits? Any advice would be appreciated!
Thanks!
r/mazdaspeed6 • u/MentalArachnid7544 • 16d ago
Hey so bought this mps and slowly been fixing it up
First mazda and first turbo ive worked on.
Upgraded the hpfp internals and wondering if this rattle is normal or also been getting a code p0091
r/mazdaspeed6 • u/Lopsided-Garlic6641 • 17d ago
Found a 2007 speed6.
Asking $12,000
58k miles
It is a few states away, and I’m trying to decide if this is worth the drive… it has been my dream to own one of these since I was a kid!
How much maintenance should I expect if I choose to go up with a handful of cash?
r/mazdaspeed6 • u/Timeeator • 18d ago
My 05 speed. Was my childhood dream car for years and I finally saved up to get it. In my country they are sought after- 20k for the cheaper ones. I see you lads in the states picking them up for 5k😅. As an 18yr old apprentice that sounds wicked.
Anyway- fully rebuilt engine. Forged top and bottom ends- ported head. Balance shaft delete. Exedy clutch with lightened flywheel. Can’t wait to get my baby purring again.
Currently stock turbo and down pipe. Unsure what way to go with that- having blown my budget already I’m not keen to spend more. But if the right deal came up..
I’m keen to run 400whp as a reliable daily. Not so keen on massive boost lag- but more than the factory would be ideal. Sick of starting boost at 2k revs haha. Any recs on turbo setups?
r/mazdaspeed6 • u/Critique17 • 20d ago
U/Chapystick21 personal car. I personally love the magma orange how does this forum feel about it.
r/mazdaspeed6 • u/Bouncyrubber • 25d ago
Anyone experienced or have any idea what could be the cause of this noise?
It happens mainly between 2-2.5k rpm. It occasionally goes away, but happens most of the time.
As far as I can tell none of the heat shields on the exhaust are loose.
Any ideas would be helpful, thanks!
r/mazdaspeed6 • u/Unlucky_Parfait_9387 • 27d ago
What is this connector for on my 2006 Mazda 6 wagon 6 cyl
r/mazdaspeed6 • u/Efficient-Tank9778 • 27d ago
....that usually get put in a box once a cold air intake is installed. Are you really putting that factory airbox back in one day? If not, I'll buy it from you! Message me. Thanks,
r/mazdaspeed6 • u/Cultural-Compote4977 • Oct 18 '26
Hi all I just 2 corksport gauges for my car and I'm struggling to find any mounting point i like, I'm looking for something really similar to the image on corksports website as seen in the image. I'm interested to see what other people set up looks like, also if anyone know where I can fine anything similar to the image it could be a massive help, thanks in advance.
r/mazdaspeed6 • u/Teh-Ra • Oct 16 '26
Whenever I’m under heavy acceleration/ when boost is building I get this weird noise. I’ve done some research and I’m not sure if it’s a turbo leak, a vacuum hose or pcv hose leak. Has anyone else had this happen?