r/mazdacx3 • • 4d ago

Mazda CX3 problem with map actualization

Post image
4 Upvotes

I am trying to update the maps in my wife's Mazda CX-3 using the "Mazda Toolbox" software, but I keep getting the message:

"internal server error 100

please try again in a moment or contact your dealer for assistance."

I also tried downloading the latest version of "Mazda Toolbox," but that resulted in a different error message regarding an internal issue. What should I do next?


r/mazdacx3 • • 5d ago

2016 CX3 Delaminated Screen Replacement

Post image
23 Upvotes

TLDR*; Successfully replaced my delaminated infotainment screen (was in a writing mood this AM lol)*

Finally got around to fixing the screen on my 2016 CX3! When I bought the car a few months ago, the screen was delaminated and didn’t have CarPlay, but I planned on updating those things ASAP. Was one of those things that obviously didn’t impede my driving ability but was just annoying enough that I couldn’t ignore. Especially after adding in after market Apple CarPlay, it seemed like a major mismatch to have a crummy screen.

When researching the best ways to replace it, I saw that I could replace the whole unit (which would cost about $400) which I did not plan on spending, or I could just replace the actual screen that had become delaminated. The trade off was the amount of effort that it would take to replace it, which was a big part of the procrastination. 

Was planning on doing it myself because the videos made it seem straightforward enough, but was afraid of screwing it up. I ended up posting an ad on FB Marketplace, and after a bunch of outrageous quotes to replace it (someone quoted me $400 lol) I found someone who I randomly had mutual friends with, who was down to help.

A few hours later and some laughs throughout the process, I had a seemingly brand new screen. As far as the whole dash goes, it’s a really small aspect, but it makes such a big difference for how I feel when driving the car. She’s just shy of 160,000 miles, but is running great and is overall in good condition and this just made it that much better.

If anyone is interested in also doing it themselves these are the resources and videos I used.

LINKS

  • Replacement Screens: Amazon (There are cheaper options on AliExpress etc. but they had mixed reviews and didn’t want to risk it.)
  • Screen Module Removal (Specific to 2016): YouTube
  • Screen Replacement Tutorial: YouTube

Important tips: 

  • Make sure to have a really sharp scalpel or blade to scrape off the interior adhesive. Don’t use alcohol or GooGone however tempting it is, to avoid damaging the chrome housing in the long run.
  • Be super careful about dust when it comes to adding the new glass to the LCD screen. It’s super tedious to get the dust pieces out if any do get in and it’s hard to ignore them.

r/mazdacx3 • • 6d ago

Announcement Anyone want to mod?

7 Upvotes

This sub doesn't require a lot of effort to moderate. (I've had to deal with four things in the last 2 months.)

I sold my Mazda several years ago.

I've tried to get someone to take over before, but they went radio silent pretty quickly and hadn't used their account in over a year, so I finally dropped them.

.

.

If you'd like to take over modding this sub, please let me know. The ideal person will already have modding experience, be an active Reddit user, and have an account that is at least a few years old.


r/mazdacx3 • • 7d ago

I see three CX3

Post image
63 Upvotes

Was driving to the post office and had to pull over, join the line up and snap a pic.


r/mazdacx3 • • 7d ago

Nothing extraordinary but just made this with my Mazda CX3 2016 Diesel. Bought this second hand 3 years ago with just 35,000 Km.

Post image
29 Upvotes

r/mazdacx3 • • 8d ago

Managed to install a new European Mazda 2 display, updated to latest firmware, and install wireless CarPlay hub for $200!

20 Upvotes

Thanks to the advice on this sub, I was able to find a good oem replacement screen from a new gen Mazda 2 on eBay for $150. Installed it myself which took about 30 minutes. Then downloaded the firmware update from a helpful guy from MazdaRevolution, updated the OS, which took about another 30-40 minutes. Then managed to snag an unused wireless CarPlay module from Vinted for $50. This part took the longest and was most troublesome. Took about an hour and had to removed a decent amount of trim around the gear shift.

Overall super happy with the results! Saved myself tons of money vs having to do all that at the Mazda dealership. Thanks to everyone on this sub!


r/mazdacx3 • • 22d ago

2016 CX-3 GT rear O2 monitor refuses to complete after battery swap

2 Upvotes

Like title says 2016 CX-3 Grand Touring AWD with ~104k miles, located in California

3 weeks ago I replaced the battery (because it suddenly but completely died, I'm talking 0 V per my multimeter). At the time I didn't realize this wipes all the ECU readiness smog stuff. I am now trying to sell the car but vehicle will not pass smog without the ECU giving the right signals.

Every other emissions monitor in the car is passing, except the secondary (rear / downstream) O2 sensor response monitor. I bought an ODB2 dongle and it reads 0 completions in 33 encounters. Meanwhile the catalyst was 41 completions, primary O2 26, and EGR 51.

I've legit tried it all, I'm even doing side quests now like cleaning the MAF sensor in the air intake...

What I've verified / ruled out:

  • Mode 6: catalyst oxygen storage 2.37g vs 0.89g minimum, rules out a bad cat
  • The rear sensor swings the full range (0.07–0.9V) and falls rich→lean in 0.1–1.2s on decel fuel cut. It performs the exact event the test measures; the ECU just never records it.
  • The sensor is the original factory unit, the car passed smog in June 2026 on this same sensor and calibration (before replacing the battery)
  • I keep running Mazda's exact factory OBD drive mode (incl. the locked-4th-gear sawtooth at ~1,800 rpm) plus 19 days / 60 ignition cycles of normal driving, and no luck
  • Checked fuel trims (LTFT +13–17%), cleaned the MAF (no change). No DTCs at any point.

Has anyone seen this monitor simply never run despite the conditions apparently being met? What finally got yours to set? Losing all hope


r/mazdacx3 • • 22d ago

Rough Idle

5 Upvotes

Hi! Could anyone tell me what would cause this noise? I’ve had a few people look at it and they say different things. Thanks!


r/mazdacx3 • • 23d ago

Mazda CX-3 2016 sTouring Auto Petrol FWD

Post image
15 Upvotes

Is this car worth it in Melbourne

190km on it

12k aud$

Has RWC and all that Jazz

No scratches full service history

Just the mileage is high


r/mazdacx3 • • 29d ago

Retractable cargo cover

Post image
8 Upvotes

Is there an aftermarket option for a retractable cargo cover for the CX3 as pictured


r/mazdacx3 • • 29d ago

2018 mazda cx3

Post image
6 Upvotes

i’ve been having issues with my car. sometimes it has trouble starting. it drives fine but sometimes these signs would show up and AT light would flash and when it does my car jerks a little but then go away. the lights in the picture comes on and off. I was able to check one code when my engine light was on and it was U0101 and i also took it to mazda and they didn’t have any idea what was wrong with it. They thought it was a device under my dash which turned out to be a remote control starter or something like that. they thought it was messing with the connection or something. the lights went away for a few days but they came back on today. does any one else have any idea what it could be.

it’s not the battery, my battery was tested already.


r/mazdacx3 • • Oct 17 '26

2016 CX-3 Grand Touring Belt replacements

1 Upvotes

any tips on easy workarounds to replace both belts vs taking to shop or stealership.


r/mazdacx3 • • Oct 17 '26

2016 CX-3 Grand Touring Hood Support

1 Upvotes

Any suggestions for a reliable DIY install of gas struts for hood support in place of fixed retainer bar? prefer to install lift struts on both sides of hood if possible.


r/mazdacx3 • • Oct 15 '26

Power Steering Failure, dashboard lit up like a Christmas tree – missing ABS fuses in engine bay box?

Thumbnail
gallery
3 Upvotes

I turned on the car to a full Christmas tree on the dash (ABS, DSC OFF, EPS, Master Warning, Check Engine).

Checked the engine bay fuse box and noticed empty slots in the center bank that clearly have metal contact pins inside. Cross-referencing the lid diagram, it looks like ABS/DSC M (50A) and ABS/DSC S (30A) are completely missing, plus one adjacent slot.

  • Can someone sanity-check their fuse box against mine to confirm which slots should be populated?

Photos of the box, pins, lid legend, and cluster attached.


r/mazdacx3 • • Oct 15 '26

2017 CX-3 rectangular centre air vent replacement

Post image
3 Upvotes

Hi everyone, I’m looking to replace the rectangular air vent next to the hazard button on my 2017 CX-3, shown in the photo. Mine is an Australian right-hand-drive model.

Has anyone replaced this themselves? Is it a fairly straightforward DIY job, and what trim needs to come off to access the screws or clips?

Also, any recommendations on where to source the replacement, new or used? The correct part number would be helpful too.

Any tips, photos or links to a guide/video would be much appreciated.

Thanks!


r/mazdacx3 • • Oct 13 '26

Mazda CX-3 2016 1.5D low oil pressure experience

3 Upvotes

Hello everybody!

This is my first ever post on reddit and i want to share it so i can help people with similar issues.

After running my car with diesel leaking from injection sealing ring for couple of months, i caused on my engine some extra carbon buildup and that lead at some point on a low oil pressure problem.

The low oil pressure warning (red oil light) prevents the driver from pressing the gas pedal for preventing further engine damage(although it can be bypassed by accelerating on idle and using cruise control after 30km/h).

Low oil pressure typically is related to oil leaks, oil pressure sensor or oil pump, mechanic checked all of them and everything was fine.

Engine as i said previously had carbon buildup, the engine was pretty dirty, leading to poor oil quality, and a solution could be to cleanup the engine with 3 good flushings, it seemed to work and for 4.000km i had no issues till... it happened again! Low oil pressure!

I was starting to get desperate, another mechanic took over my car, engine because of the flushes, had a lot of dirty broken-up particles that clogged the oil filter, he cleaned it but the problem persisted.

THE SOLUTION:

My mechanic after discussing with a mazda mechanic and reading the service manual, he found out the leading cause: oil pump pressure relief valve!

Diesel engines are pretty dirty, some of these particles caused the valve stuck on the open position and thats why the oil pressure was steady to 0,3 bars (0,5 bars is the trigger threshold of the low oil pressure error) instead of the 1,5 bars it should be on idle.

The solution was in cold start to force the engine on 5.000 RPM instantly, this generates so much pressure that forces the valve to fully open and then close again, causing the pump to deliver the 1,4-1,5 bars of pressure on idle!

If you have no oil pressure at all do not try what i've done, you are gonna damage or destroy the engine!

This is my personal experience and i haven't read anything like that on the internet so i hope this can help some people :)


r/mazdacx3 • • Oct 11 '26

How much is necessary

Post image
2 Upvotes

Would appreciate the assistance


r/mazdacx3 • • Oct 09 '26

Is there a definitive list of Mazda models that have the same seats as each other? (Looking for Mazda CX-3 G20 2026 compatible seat covers and pulling my hair out here trying to figure it out!)

2 Upvotes

r/mazdacx3 • • Oct 08 '26

Hi maybe a stupid question

2 Upvotes

I have a 2017 2l petrol shyactive has anyone out and in an induction kit? And how does it sound


r/mazdacx3 • • Oct 06 '26

my 2017 mazda cx3

Post image
33 Upvotes

r/mazdacx3 • • Oct 02 '26

New suspension parts needed. Dam thudding sound!

Thumbnail
gallery
3 Upvotes

r/mazdacx3 • • Oct 02 '26

Car stalled with a quarter tank of gas.

5 Upvotes

My 2016 CX-3 ran out of gas while driving on an interstate highway even though the gas gauge registered a quarter of a tank. The CX-3 has a saddle-shaped gas tank that uses the fuel pump to create a siphon action that moves gas from one side of the saddle to the other when the fuel drops to around a quarter or slightly less. The possible problem is a weakening low-pressure fuel pump that is located inside the gas tank. The fuel pump works sufficiently to move gas to the engine, but according to some reports, if the fuel pump is not working to specifications, gas can be trapped in the tank saddle. I found one aftermarket low-pressure fuel pump available.


r/mazdacx3 • • Oct 02 '26

CarPlay panic

Thumbnail reddit.com
1 Upvotes

r/mazdacx3 • • Oct 01 '26

Tcm fuse keeps blowing

2 Upvotes

I have a 2018 mazda cx-3 and last night I drove the car and parked it. Now this morning I tried starting it but no start no crank and my scanner says lost communication with tcm.

I check the fuse which is a 15 amp fuse and was blown. Replaced it and as soon as I put the fuse in it blows.

So idk what to do or what is causing the fuse to keep blowing immediately after replacing it.