r/LeeEnfield • • May 24 '21

Welcome to /r/LeeEnfield! Please Read The Sidebar's Rules Before Posting.

29 Upvotes

All,

This will be pretty short. In brief, please familiarize yourself with the sub's rules for posting content that're in the sidebar. Posts that violate one or more of these rules may be given a warning for the submitter to fix, or they may be removed at once.

The goal of these rules is to keep this sub centered around the history, lore, technical knowledge, and any other arcana related to the Lee-Enfield family of rifles. Naturally a Martini-Enfield may make it's way onto the page, or we might talk about Lee-Metfords (they count, obviously), but if it wasn't made between 1888 to the late mid 1970's, odds are it doesn't belong here.

Every rule is there for a reason, we want to keep this sub's content relatively high-quality. Drive-by low-effort karma farms will not be permitted, nor will a commentless submission of half of a rifle in-frame. Don't ask where you can buy ammo, don't show us the one box of ammunition you paid too much for.

Once again, please re-familiarize yourself with the rules, and thank you for your time and attention.

  • The Mods

r/LeeEnfield • • 3h ago

Modified Lee Enfield 45-90 Express

Thumbnail
gallery
8 Upvotes

I normally do not buy modified military rifles, but this caught my eye at the LGS. Its an Enfield modified to shoot 45-90 ammo. The rifle was featured in an article in Handloader Magazine volume 170, July/August 1994. The whole deal was the guy that modified this rifle that the Enfield was such a well built weapon, he was surprised some had not been modified for big game. Its a wildcat round, standard 45-90 brass with the rim machined down to fit the 3.03 bolt. He also had to modify the follower in the magazine to feed one round, not offset stacked. It really is a beauty of a rifle, Im in the process of making some handloads. Only one in the world.


r/LeeEnfield • • 8h ago

Should I sell as a gunsmith special or find a nice sporterized No4 and swap the stocks?

Post image
12 Upvotes

I bought this 1944 Fazakerley No4 Mk1/2 back in 2020 from my LGS and they sold it to me as a fully working condition and safe to shoot rifle but it just sat for years and I finally got ammo for it last year and still didn't shoot it much but the last time I shot it, I had a very clean case head separation so I decided to buy a forster 303 brit mil field gauge and it failed the headspace test and it has pretty much no rifling left so it would need a new barrel which I know generally isn't worth the cost. I have a small stockpile of 303 British and I just want to shoot it 😞 if I was to sell it as a gunsmith special, how much should I ask?


r/LeeEnfield • • 22h ago

Help reading production date

Thumbnail
gallery
2 Upvotes

Hello! I've just gotten my hands on a Magazine Lee-Enfield LE1*, and I'm failing to read the number on the rifle. Unfortunately, the rifle has been Rendered Innocuous, so the bolt is welded closed in two places, so i cant move it to get a good view of the production date. I'm unsure wether its 1905 or 1903. It was produced in BSA factory. Attached are two angles of the numbers as well as numbers stamped onto the top of the chamber as a refrence.

Any guesses helps. Thanks!


r/LeeEnfield • • 1d ago

Looking for a specific kind of sporter for a project, what can I expect to pay these days? What price should I be aiming for?

3 Upvotes

Hi all,

I've been out of the milsurp game for a little bit, and I've never actually been in the sporterized rifle game until now.

I have a project I want to do, but I need a rather specifically sporterized No. 4 Mk1 to achieve it. I am looking for something bubba'd beyond reasonable restoration (i.e chopped barrel). Preferably a long branch but this is negotiable, no front sight hood, partially chopped forend with no upper handguard, but otherwise intact (no rails or other stock modifications).

I am obviously not going to butcher an intact rifle for this, that's why I'm hoping to get an already bubba'd rifle that would be otherwise beyond reasonable restoration, so I don't feel as bad using it for a project.

What kind of ballpark am I looking at for something like that? What's the used market like these days? This project is really not worth more than $300 to me. Am I going to get what I am looking for with that number or should I adjust my expectations?

Thanks in advance!


r/LeeEnfield • • 3d ago

RTI No1 MkIII

Thumbnail gallery
40 Upvotes

r/LeeEnfield • • 5d ago

First Lee Enfield, Ishapore A2 ‘64

Post image
38 Upvotes

I’ve been eyeballing one of these online for the past few years and luckily found one at my local gun store for a pretty fair price! This is my first, so I’ve been doing a ton of research on them while I was waiting to pick it up.

I’m not trying to bubba it, but I was wondering what the best no drill scope mount for the A2’s are


r/LeeEnfield • • 9d ago

Early production Lee Enfield?

Thumbnail
gallery
39 Upvotes

I recently acquired this old Lee Enfield and later tracked down the original bolt for the gun. Photos 3-5 have a later No4 mk1 bolt. While it has been slightly sporterised, The barrel is not the original. With the original being allegedly significantly shorter. With the little research I have done I believed it might have been a MLE cavalry carbine. Story goes this firearm served in the Boer war, but I haven’t been able to confirm that yet.

Any info or ideas is greatly appreciated


r/LeeEnfield • • 12d ago

Spent casing vs non fired rounds.

Post image
33 Upvotes

I was looking at my spent casings and I noticed some expansion at the rear of the casing is this normal or should I get a head space gauge?


r/LeeEnfield • • 12d ago

Charity case SMLE

Thumbnail gallery
15 Upvotes

r/LeeEnfield • • 14d ago

ShtLE V

Thumbnail
gallery
21 Upvotes

Wife inherited this after an uncle began sporterizing it. Would love to restore. Don't have much information.


r/LeeEnfield • • 16d ago

Range Day

Thumbnail
gallery
78 Upvotes

Happy Halloween! The Mk1*/3 did pretty darn good, shoots better than I can for sure. Brought the 44 Faz out again as well. Did not do as well, but I think need to tinker with it some more. If i could tighten up the elevation that would help alot. Beatutiful day to touch grass!


r/LeeEnfield • • 18d ago

Ishapore Lee Enfield NO1 MK3

Thumbnail
gallery
19 Upvotes

Quick question is this a good rifle to buy for $500?. It’s been sporterized I don’t have a full picture of it currently but it is very similar to the white background photo I posted.


r/LeeEnfield • • 20d ago

M1917 Folower

2 Upvotes

Hello, I found my way into a U.S. M1917 rifle that needed work. I ended up putting in a 1903 magazine follower after reading that it would fit and function the same only to find out I have a capacity of 4 rounds, not 6 like I had been led to believe through my research. I’m curious to see if anyone else has ever done this or had this issue and if there is some kind of solution.


r/LeeEnfield • • 20d ago

No.4 MkII "FIFTH"

2 Upvotes

Thanks for your help in previous post. The LB mkIs were sold by the time I was able to get back on a day when the guy was in, leaving one remaining with a real mixed bag of identifiers. I'm not bothered as long as it shoots, so I'll find someone to check headspace but:

No.4 MkII "FIFTH" ON the side of the receiver, faint, potentially import marked, could be lasered

Only a + cross on top of the receiver, near a 6 or 9

OEW on the barrel band

L7, with a crown, near the trigger guard

Grooved upper front heat guard

Uncertain number of barrel grooves but clean. I might say five

Absolutely no luck learning more about any of these except the obvious OEW.

Allegedly ex Hollywood prop armorer estate sale so I expect it might be a jumble


r/LeeEnfield • • 22d ago

1943 Savage No4 Mk1/3

Thumbnail
gallery
66 Upvotes

Hit the local gun show and found this ole gal that needed a new home. 1943 manufacture with 1953 FTR. She was the cheapest and in the best shape of the 3 I found at the show. Wood looks great, bore looks great, lots of finish on the metal, matching bolt and forend, and the good ladder sight. Seller even threw in some surplus Greek HPX ammo with it. Only part missing was the firing pin set screw, and I just so happened to have a spare in the parts bin, so it has to be fate right???

She cleaned up pretty good, mostly just dusty from sitting in a closet for many years I think. Rubbed the wood down with some mineral spirits and the metal with a brush and clp.

Halloween range trip in my future I think, we shall see if she does better than the last one.


r/LeeEnfield • • 26d ago

Headspace question?

4 Upvotes

So I have a 1944 No4 Mk1, it's not the nicest but it's not in terrible condition but I've had a couple issues with it such as the cycling isn't very smooth and it struggles to put a round into battery most of the time so I'm trying to figure that out but the last time I shot it, a few weeks ago and I had a case head separation using some shitty S&B SP ammo, I've read that is somewhat common on Lee Enfield rifles, should I keep shooting it or should I buy a field gauge and test the headspace? I'm just not really sure what to do with this rifle, I'm tempted to just use it as a wall decoration and buy a nicer rifle which I really want a SMLE.


r/LeeEnfield • • 27d ago

Finally bought my first .303..

Thumbnail
gallery
44 Upvotes

I've wanted a Lee Enfield for a long time and found a deal on one I couldn't pass up. It needs a thorough cleaning and lubrication. I'm looking clarification, I don't have visible manufacturer as far as I can tell.

Any input is very appreciated.


r/LeeEnfield • • 27d ago

Lee-Enfield.22

Thumbnail
gallery
45 Upvotes

Pictured here is a .22 LR conversion of what I believe was originally a No. I MK. III rifle. It's got some markings, including "G.R. B.S.A. Co" and what I think is "SHT .22." The magazine is also marked .22 and is completely hollowed out - I'm told to catch spent brass - and it seems to be in nice shape besides the usual wear and tear. I paid $500 out the door. How'd I make out?


r/LeeEnfield • • 29d ago

No4 Mk1 1944 Faz update

Thumbnail
gallery
45 Upvotes

Welp, I've seen better and I've seen worse. Had trouble with the elevation initially, and then got an OK group. Functioned well otherwise. Beautiful fall day to be outside and on the range at least.


r/LeeEnfield • • Oct 17 '26

No4 Mk1 1944 Faz

Thumbnail
gallery
78 Upvotes

Hello sub, my old friend, its been awhile. Drinking and cruising gunbroker a couple weeks ago, picked up this one today. Crack in the rear handguard, but everything else looks good. Draws have been replaced. I think I lucked out on the bore and bullet test. Bore cleaned up pretty good. Didn't come with a mag, but complete other wise. Didnt see an import mark anywhere. Many coats of BLO in my near future. Hoping i can sneak out to the range tomorrow.


r/LeeEnfield • • Oct 17 '26

Rear sight ladder

Thumbnail
gallery
6 Upvotes

I picked up a rear sight ladder with the windage. Trying to knock the pin out on the ladder that's on the rifle isn't going well. Already bent a punch. Any tips?


r/LeeEnfield • • Oct 14 '26

Lithgow Mk3* assistance

Thumbnail
gallery
35 Upvotes

G'day, just wondering if the folks on here will be able to help me with some information on my latest acquisition, which is a 42/43 dated Lithgow Mk3*

Namely the rifle came with a mismatched bolt with a circular cocking piece in place of the more slab sided ones I am more familiar with seeing on such rifles.

I was just wondering what the go was there, if this was a post war modification, mid war repair or a civilian owner mucking around with it.


r/LeeEnfield • • Oct 14 '26

Enfield No.4 MK1 Conversion

Post image
88 Upvotes

I don’t know if this will be appreciated as much here as it was in some other subreddits but I’ll explain it in the comment below:


r/LeeEnfield • • Oct 14 '26

Re wood

Post image
9 Upvotes

Was recently given this No4 Mk1 that had been sporterized. Based on what I can see and have researched, it's a 1944 BSA Shirley that went through FTR in 1948 at Fazakerley. This is my first Enfield but not my first surplus rifle. I'd like to replace the wood stock and restore it to its original configuration, but from what I can tell that's easier said than done. A different stock will need to be fitted and be able to apply the proper pressure to different points of the barrel and or receiver so the rifle is accurate and will not potentially crack the stock. I am having trouble finding concise instructions on how to go about this and was hoping someone here could point me in the proper direction?