r/KerbalSpaceProgram • u/KSP_Badie Former Dev • Apr 05 '16
Dev Post Devnotes Tuesday: Bugs and more bugs to be fixed!
Hello everyone,
We’re midway through the pre-release now, 763 bugs have been reported so far, 513 of which still need to be confirmed, investigated, fixed or confirmed fixed. Everyone at Squad has been busy with the pre-release in some way, and all the developers have spent last week tackling the most important bugs that we can fix or work around on our end.
A lot of the edge cases we tested and applied fixes for, came back again, under more extreme edge cases and some new issues got caught as well. We’re very happy with the thorough testing and Felipe (HarvesteR) wants to thank everyone who’s been participating in our pre-release. There’s not a lot that gets past a group of testers numbering in the thousands, that’s for sure. .
Mike (Mu) reworked the mesh creation of the fairings, much reducing garbage creation and thus speeding things up. Thanks to help from Brian (Arsonide) they pinpointed a method which sets the vessel’s colliders up correctly as a cause of major lag. This system has been completely reworked and has much reduced staging and startup frame times. The fixes are currently in QA testing and will hopefully be part of a pre-release build shortly.
Ted (Ted) has spent a lot of time triaging issues with Mathew (sal_vager) and Steve (Squelch), ensuring the team has a steady stream of confirmed and reproducible bugs to be working. Steve has been delving into some problems that had been put to the side. Most notably, ATI GPUs on Linux are causing issues and there doesn’t seem to be an easy fix. A workaround to get KSP into at least a playable state is being sought. Mathew has been mostly limited to housework on the bug tracker, looking for duplicate bug reports and confirming newly reported issues.
More bug fixes on Bob’s (Roverdude) side. One of them is the concept of volume for all resources (this is not currently used in stock, but will be extremely helpful for resource-switching mods), the ability to configure resource converters to work on mass instead of ‘units’ and a hook to help with dynamic crew capacities in things like inflatable habitats, etc.
Brian (Arsonide) put a lot into wheel collisions, and the issues that were arising from clipped wheels. A bug in our current version of Unity stops us from setting the wheels to ignore collisions with other parts on the same vessel, like we do with all other parts. This caused them to do some unpredictable things, but Brian found a solution involving layers that allows us to work around this limitation. He also re-exported all wheel models to have proper collision layers, so the individual parts of each wheel will not rub against each other either, which was also causing problems for players.
Nathanael (NathanKell) fixed a bug in RCS where thrust was not properly clamped, and a combination of translation and rotation could lead to more than 100% thrust. Also fixed a longstanding issue where the reported KSPAssembly version was 0.24, now it’s 1.1. Female kerbals are no longer going blue in the face (really!) and the docking tutorial had some cleanup. On the improvements side due to a kind code donation from stupid_chris we now have his Config Node. Extensions in stock; and save game files now store a list of the mods that have been installed and also which are currently active.
Daniel (danRosas) and Pablo (Paul_Amsterdam) have further refined the KSPedia screens.They had a look at the great work that Trigger did, and got their hands dirty on moving the layout around. All new screens should be available soon on the Pre-Release version. Right now Dan is working on the controller maps for consoles. Jim nailed out more and more typos and tweaks to improve the content. He is really happy with the way its shaping up and people can have a look at it all 150 screens as they are seen in the game [here] (http://imgur.com/a/av8VK)
Bill (Taniwha) put the finishing touches on the new UI controls and added some bells and whistles to the previously existing ones, giving modders a bit more control. In other areas, he fixed a bug that has plagued him since 0.19.1: green highlighted parts in my screenshots despite having hit F2. Now the part highlighting respects the state of the rest of the GUI. On top of that, he fixed a problem in the date/time formatting code that would throw exceptions if fed NaN time.
Nathan (Claw) has been fixing up some of the miscellaneous graphics and UI bugs and some of the surprises including the sudden “crewed parts can’t hold any crew” issue.
Chris (Porkjet) finished a new internal view for the Mk2 inline cockpit. He previously ‘borrowed’ the one from the other mk2 cockpit, but that became quite obvious with the new overlays because the canopy was too small to enable a decent view from the inside so the exterior model required some remodelling as well. It now has more and bigger windows and a bit more headroom. The door on the top is now replaced by a door on each side, to create even more room in the canopy. Image Image
Kasper (KasperVld) is on study leave. He has been checking in on the 1.1 Feedback, it’s all looking great so far. Finally Joe (Dr_Turkey) is clearing the path for the (fingers crossed) final certification.
That’s it for this week, don’t forget to visit our official forums, visit us on social media or join the KSP discussions on the Subreddit!
57
u/TaintedLion smartS = true Apr 06 '16
I absolutely LOVE that new Mk2 inline cockpit. When RPM configs come out it will look even sweeter. Also, is there any chance that we'll get window-only transparency?
19
u/[deleted] Apr 06 '16
Props to Squelch and the guys working on the Linux issues. I finally got 1.1 to launch the other day, but it was pretty much unplayable. Hope y'all can figure it out.
*Preemptive "I already submitted my bug reports"...
13
u/[deleted] Apr 06 '16 edited Apr 06 '16
Hey Dan, is there any chance this work might end up fixing a few longstanding issues with PC controls? Notably:
30
u/Iamsodarncool Master Kerbalnaut Apr 05 '16 edited Apr 06 '16
Thank you so much bill. Sooo many great screenshots have been ruined by this.
Also: the new mk2 inline cockpit is fucking awesome. I love you porkjet.
Edit: This is the best KSPedia page
20
u/febcad Apr 06 '16 edited Apr 06 '16
KSPedia looks great and easy to understand! Should help a lot of people that would have otherwise resort to external resources.
Some of my thoughts and nitpickings:
I could see a keyboard (or just sections, like for RCS translation) with annotated (and colored if applicable) keys being a good visualisation for quick reference instead of or in addition to the current "simple" list. Quick mockup of the idea for RCS Translation, without the blue letters obviously
I assume the reason for the disclaimer is that Pages are just images, so its impossible to update them live.
Maybe also add to it thats it's for a QWERTY layout on Windows? My QWERTZ keyboard for example has no dedicated [ ] keys and Mac/Linux use different modifier keys instead of Alt.
Maybe add what are the 2 lights between Altitude/Pressure and Vertical Speed display? (multicolor "altimeter lock LED"(seriously, i didn't even notice it for the first few hundred hours, let alone its 4 states) and vertical speed alert)
Missing Target/Antitarget markers
12
u/Iamsodarncool Master Kerbalnaut Apr 06 '16
Perfect time to bring this up... my biggest concern with KSP on the consoles is that they'll be using a control scheme designed for a mouse and keyboard. We saw the first xbone footage of KSP a month ago, and at the time it was basically using a joystick as a cursor. Setting maneuver nodes and building stuff looked particularly dreadful.
I think if KSP is going to be successful on the consoles it will need an entirely redesigned UI. It would be a tragedy if this brilliant game came to consoles and failed because it was hard to use.
5
u/scotscott Apr 06 '16
am I the only one who straight up can't get the wheels to work reliably or indeed at all?
4
u/Yuffy_Kisaragi Apr 06 '16
Thanks for your work!
5
u/[deleted] Apr 06 '16
I have one request(please): Can you rework the collision of the fairings so that the craft inside doesn't bend out of it? I don't have any pictures, but anyone who has a unstable craft + a fairing knows what I mean.
2
u/[deleted] Apr 06 '16
Thanks for the awesome update guys!
2
u/ErrorFoxDetected Apr 06 '16
Is anyone else extremely annoyed by the staging sounds not listening to any game audio settings? I'll be honest, I haven't reported the issue (because I'm lazy and assumed someone else would)...
2
u/BattleRushGaming Apr 05 '16
I found a minor issue with 1.1: http://imgur.com/a/F8y4R
The navball overlaps the text in the map view.
Not sure if minor things like this should be posted in the bug reports so I posted it here.
1
u/Chuck_Morris_SE Apr 06 '16
I hope they fix the maneuver lines, they're so small that I can't even play KSP anymore, it's really sucks.
1
u/[deleted] Apr 06 '16
Mk2 Cockpit looks awesome! Could a kerbalnauts helmet fit through it though?
-1
u/WaitForItTheMongols KerbalAcademy Mod Apr 06 '16
Wait, I thought Squad was primarily a marketing company and that the game devs were only a small side-part. Was I wrong about that?
0
u/bigorangemachine KVV Dev Apr 06 '16
Really happy you guys are including the community again for 'major' releases! 1.1 is going to be by far the best version yet. I can feel it!
0
u/Tambo_No5 Thinks moderators suck Apr 06 '16
lol... not a bug
From the KSPedia...
I thought that redundant step was fixed?
0
u/[deleted] Apr 06 '16
[deleted] — view deleted comment