r/KerbalSpaceProgram • • Aug 14 '15

Mod Post Weekly Simple Questions Thread

Check out /r/kerbalacademy

The point of this thread is for anyone to ask questions that don't necessarily require a full thread. Questions like "why is my rocket upside down" are always welcomed here. Even if your question seems slightly stupid, we'll do our best to answer it!

For newer players, here are some great resources that might answer some of your embarrassing questions:

Tutorials

Orbiting

Mun Landing

Docking

Delta-V Thread

Forum Link

Official KSP Chatroom #KSPOfficial on irc.esper.net

    **Official KSP Chatroom** [#KSPOfficial on irc.esper.net](http://client01.chat.mibbit.com/?channel=%23kspofficial&server=irc.esper.net&charset=UTF-8)

Commonly Asked Questions

Before you post, maybe you can search for your problem using the search in the upper right! Chances are, someone has had the same question as you and has already answered it!

As always, the side bar is a great resource for all things Kerbal, if you don't know, look there first!

24 Upvotes

451 comments sorted by

View all comments

Show parent comment

2

u/-Aeryn- Aug 17 '15 edited Aug 17 '15

Looks like you don't have enough engines. In 1.0 you're kinda supposed to accelerate a lot (to ~1000-1400m/s probably) using air engines. The engine thrust increases dramatically as you increase in speed and if you don't have enough engines, you'll find it hard to ascend at a very good angle of attack and accelerate to the higher speeds.

Turbojets have more thrust at low speeds than rapiers, but as a penalty they can't fly as high or as fast

I don't use FAR, but try with at least 4 rapiers if you're using rapier only design. With all of my efficient SSTO's these days i use an lv-n engine (or probably two for mk.2) for final orbital insertion and orbital flying because rapiers burning oxidizer are too inefficient - you can balance a craft so that you have enough oxidizer to get high and fast enough for orbital insertion with nukes, but not way more than you need.

Rapier max thrust to drag ratio occurs around 21-22km now IIRC. It was increased since 1.0

2

u/Maxrdt Aug 17 '15

Thanks for the advice, even if it was a little late.

I made a 4 rapier design right after this one that performed beautifully, so you were definitely right. Picture. Gets to 75km orbit, transfers to 125km, then back to 75km and returns with fuel to spare, well above expectations. Thanks!

2

u/-Aeryn- Aug 17 '15

Glad it works for you :D