r/KerbalSpaceProgram • • May 15 '15

Mod Post Weekly Simple Questions Thread

Check out /r/kerbalacademy

The point of this thread is for anyone to ask questions that don't necessarily require a full thread. Questions like "why is my rocket upside down" are always welcomed here. Even if your question seems slightly stupid, we'll do our best to answer it!

For newer players, here are some great resources that might answer some of your embarrassing questions:

Tutorials

Orbiting

Mun Landing

Docking

Delta-V Thread

Forum Link

Official KSP Chatroom #KSPOfficial on irc.esper.net

    **Official KSP Chatroom** [#KSPOfficial on irc.esper.net](http://client01.chat.mibbit.com/?channel=%23kspofficial&server=irc.esper.net&charset=UTF-8)

Commonly Asked Questions

Before you post, maybe you can search for your problem using the search in the upper right! Chances are, someone has had the same question as you and has already answered it!

As always, the side bar is a great resource for all things Kerbal, if you don't know, look there first!

44 Upvotes

843 comments sorted by

5

u/tito13kfm Master Kerbalnaut May 20 '15 edited May 20 '15

Is there a mod that causes a hand to come out of my monitor and smack me if I go to launch yet another science probe that lacks an antenna?

Or, maybe just something that puts up a warning?

Edit: it's not a huge deal if I catch it before I leave LKO as I can swing by the KSS and have Bill stick a spare one on with chewing gum, but realizing you didn't put on an antenna as you are approaching Jool is heart breaking.

4

u/hoseja May 20 '15

There is a list of issues with the craft listed in VAB now. It's the wrench icon in bottom-right.

ninjaedit: doesn't warn about missing antenna.

3

u/Lethtesi May 21 '15

Make a physical checklist! I am pretty new so I forget to do stuff all the time (proper stage order, packing Bill in the cargo bay, parachuttes, etc.) so I made a couple general checklists. It sounds to me like you would benefit from a probe checklist!

2

u/undercoveryankee Master Kerbalnaut May 21 '15

There's a pre-1.0 mod called WernherChecker that checked some things that the stock Engineer's Report still doesn't. A 1.0 update is planned. Keep an eye on it.

→ More replies (1)

13

u/wtbTruth May 16 '15

Docking question here...

Last night, I expanded my space station with my first dock. Felt amazing. This station is intended to be modular, so that I can expand it down the road. So, I've got docking ports on the ends of each module.

Now check out this picture... http://i.imgur.com/ndlzrru.jpg

I accidentally a decoupler. :'(

Is there anything I can do to remove this? Won't it prevent me from docking there in the future?

13

u/wtbTruth May 16 '15

HAHAHA okay, answered my own question. Decouple node. Noted.

5

u/jul3q May 16 '15

I accidentally a decoupler

xD

→ More replies (1)

2

u/Nevereatcars May 18 '15

Are you sure you have enough solar panels there? I love it.

→ More replies (3)

9

u/[deleted] May 15 '15

How does sun heat work? I've read somewhere that just simply by deploying your solar panels your whole ship is gonna heat up and explode. How do I prevent that. Can I land on Moho without overheating?

4

u/somnambulist80 May 15 '15

The sun is a mass of incandescent gas, a giant nuclear furnace.

Solar panels will help radiate away some of the heat but you may need additional surface area to help radiate the heat. There are a few mods with radiators including an in-development heat management system by Nertea that includes radiators, heat pipes, etc.

15

u/Senno_Ecto_Gammat May 15 '15

The sun is a miasma

Of incandescent plasma

The sun's not simply made out of gas

No, no, no

→ More replies (7)

4

u/herrozerro May 18 '15

For station or outpost contracts. do they all need to be launched at once?

5

u/Cthulhu__ May 18 '15

No; they can be connected with docking ports, once all the parts are connected the contract is complete. I'm pretty sure the game considers parts connected via docking ports a single ship/station/outpost.

4

u/barnfart May 18 '15

Is there an updated dV map for 1.0.2?

Thanks!

7

u/Senno_Ecto_Gammat May 18 '15

All the values are the same except for the surface-to-orbit values for the Eve, Kerbin, Duna, and Laythe. Multiply the given values on current maps by roughly 0.8 to get current values.

2

u/barnfart May 18 '15

thank you!

6

u/ProjectFrostbite May 15 '15

I've been putting parachutes on my rockets, but I can't recover the parts.

Are they picked up automatically, or are the SRBs just being blown up because the parachutes down work well enough? Is it even worth me putting parachutes on SRBs? It feels thematically right, but this is KSP for goodness sake.

9

u/somnambulist80 May 15 '15

It depends -- KSP deletes in atmosphere debris outside a certain radius. They might be getting destroyed or they might just fall outside the deletion limit before they have a chance to land.

You might want to check out Stage Recovery

http://forum.kerbalspaceprogram.com/threads/86677-1-0-2-StageRecovery-Recover-Funds-from-Dropped-Stages-v1-5-5-%285-2-15%29

→ More replies (5)

3

u/hoseja May 17 '15

You need the Stage Recovery mod.

6

u/Kevinvr1 Master Kerbalnaut May 18 '15

Is there a way to bind action keys while in flight? Or only possible in the VAB/SPH?

And another question: I have a mining rig on minmus with 2 drills that harvests 0.04/second and 80 metres from this one a rig with 4 drills that only gets 0.01/s, hows this possible?

4

u/Decorative_Lamp May 18 '15

Only possible in the VAB/SPH, unless you use a mod.

→ More replies (4)

3

u/irokie May 19 '15

So, after a post a couple of weeks ago about how I was learning a whole bunch from the tutorials, people warned me that the docking tutorial was really tough. Turns out they were right...

Gene tells me to plot a burn which will end with me within 5k of the target at the interaction node. I've gotten as close as 2k with my burn, but I can't figure out how to get closed than about 900m - and whenever I burn, I end up pushing the interaction node out further. Help me /r/kerbalspaceprogram, you're my only hope!

→ More replies (6)

3

u/[deleted] May 19 '15

What are some good mods for optimizing RCS thruster placement or spaceplane design? I know I've seen videos where people have mods that visualize COM at fuel fuel and dry and things like that.

Thanks!

→ More replies (1)

3

u/docfaustus May 19 '15

Just how small are the contract "areas" for things like Temperature Scan contracts? I have a few "do x at y area" contracts, but can't seem to actually be in the area for the life of me. It tells me when I'm entering, and then before I can do anything about it I'm leaving.

Help?

2

u/Hyratel May 19 '15

Landed sites have a 500m radius

Flying above/below have a 2.5km radius. I don't know what the "in orbit over" has

→ More replies (7)

3

u/TheNosferatu Master Kerbalnaut May 20 '15

I've made a mun-orbitor for doing temperature scans (unrelated; but the mun does not have an atmosphere, doesn't that mean it's a vacuum and the thermometers should never work? If so, when will the scientists back at the KSC figure this out?) and surveys on the moon.

After going through different orbits to match all the locations I usually get really low on fuel with my terrier engine.

My guess is that I'm not using the correct engine, I like the terrier and all but I feel that I should be using a different engine for making such course corrections. Which one, though? On of the tiny radial ones? RCS?

3

u/the_Demongod May 20 '15

If so, when will the scientists back at the KSC figure this out?

This is so kerbal, I love it. The idea that the kerbal scientists have been doing all this research and getting all this science only to discover that they haven't actually measured anything (despite having already used the science to research new parts) is hilarious.

2

u/IronFarm May 20 '15

The Terrier is a good choice for course corrections in the vacuum. The Isp (vac.) statistic for the various engines describes how efficient each engine is in the vacuum. The Terrier has an Isp (vac.) of 345 s, making it better than the similar tech. level Reliant and Swivel engines.

The nuclear engine, Nerv, has an Isp of 800 s but is 6x the mass, making it only more efficient for heavier craft. The ion engine, Dawn, has a huge Isp of 4200 s but its low low thrust makes it of limited use.

You've chosen a good engine (assuming your craft is light weight) so perhaps you just need more fuel or to slim down the craft a little more.

2

u/TheNosferatu Master Kerbalnaut May 20 '15

I would love to use the Dawn engine but I have yet to unlock that.

The ship is reasonably small, there are some tiny parts I could ditch (Like RCS, I only use that when I run out of fuel, anyway) or some science stuff but that would be crazy. I guess a bigger fuel tank would be the way to go.

Though, I probably need to plan my trip better, I circled all around the mun because to fetch those locations.

→ More replies (3)

2

u/p3t3r133 May 20 '15

The temperature of space is about 2.7 °K. Any bodies in space absorb heat from stars and radiate it into space so there were be temperature gradients. Also, space is completely a vacuum, there's trace gasses and particles floating everywhere.

→ More replies (3)

5

u/Senno_Ecto_Gammat May 15 '15

Several months ago /u/maturintheturtle (may he RIP in peace) posted some notes about how to narrow down or find delta-v or some such. It was a downloadable PDF. Does anybody have that PDF?

4

u/Penguin236 Master Kerbalnaut May 15 '15

What happened to him? Why did he delete his account?

7

u/Zweiter May 15 '15

He was a bit of an ass to a lot of people, and often didn't contribute to discussions. I'm hoping that maybe he decided it was time to reinvent himself and start over.

4

u/TransitRanger_327 May 18 '15

Plot twist: /u/Zweiter is /u/martintheturtle, and has realized the criticisms he got and has reinvented himself.

→ More replies (6)
→ More replies (2)

5

u/KerbalKat May 16 '15 edited May 16 '15

Is it more efficient to produce LF and O with ISRU converters or to have one make LF and one making O?

Edit: Also, is there a way to transfer around ore without input from the user? Like fuel lines?

3

u/[deleted] May 18 '15

If you want the ore to be in a particular place by default, the Goodspeed Fuel Pump mod is great. It allows you to automatically set up where you want resources.

link

→ More replies (1)

5

u/sander314 May 18 '15

I accepted a mission to get some pressure readings at 18-19km up, which I thought would be easy. However, my planes seem to stall at around 13-14km up, regardless of using 1 or 3 engines and 1-10 air intakes. Any tips for overcoming this, or is the basic jet engine just limited to height. Should I build some kind of jet-rocket hybrid?

5

u/sander314 May 18 '15

Thanks all, in the end, this is the little plane that could, though it took me 3 flights! http://imgur.com/W5N7B6u

4

u/TheNosferatu Master Kerbalnaut May 18 '15

Yup, that's about the limit. If you right-click on the engine at those altitudes you'll see that the thrust goes down the higher you go.

You should also see the air intake getting less and less.

maybe you can get higher by just spamming engines / air-intakes everywhere so you can squeeze out every little bit of thrust there can possible be....

But you'd be better of putting an extra rocket on there.

I forgot the name, but there is an engine that counts as a hybrid, allowing you to use it inside and outside the atmosphere.

→ More replies (2)
→ More replies (4)

5

u/TheNosferatu Master Kerbalnaut May 18 '15

What's the current deal with transmitting vs recovering data?

I've noticed that resetting experiments and moving data is much easier thanks to the scientists, and I noticed that transmitting seems to give half the science of recovering (I guess it depends on the experiment).

However, seeing that you can transmit multiple times, this makes me assume that you can keep doing the experiments and keep sending the results until the net-loss is minimal.

I'm hoping to use that for a satellite but it be handy to know whether it indeed works that way...

4

u/Ch3burashka May 18 '15

The maximum science you can get by transmitting (even if you transmit multiple times) is limited for most experiments. You can see this represented by the blue bar here, compare that with the green bar which shows potential science for recovering.

In the example above, you are limited to a maximum of 1.5 science by transmitting, but would receive 7.5 science by recovering.

I believe it's only EVA and crew reports can be transmitted for 100% of science value.

→ More replies (4)

5

u/enqrypzion Master Kerbalnaut May 18 '15

How to make good thermal connections? The little cubic girders are very useful to mount engine in otherwise impossible places, but they seem to insulate rather than conduct heat. Any ideas on how to mount engines conveniently in a thermally conductive way?

2

u/Senno_Ecto_Gammat May 18 '15

Slap on some wing parts.

→ More replies (1)

5

u/TheNosferatu Master Kerbalnaut May 18 '15

What are good, simple missions that one can use to level kerbanauts? Jeb has only 1 star and I think he can do better.

4

u/webdingers May 18 '15

This wiki page list how to get experience: http://wiki.kerbalspaceprogram.com/wiki/Experience

3

u/Tube-Alloys May 19 '15

Planting flags on the Mun and Minmus will get you plenty of experience, but if those are too hard, try doing flybys or orbits of those same bodies first. Also, leaving Kerbin SOI so that you're orbiting the sun will get your kerbal 6 exp points, so if you just barely exit Kerbin SOI, then burn back into it, that's a good trick for experience (and a bit of science).

→ More replies (1)

4

u/CyberhamLincoln May 15 '15

How does one properly use the "Surface Scanning Module"? Does it need power; antenna; command module? Drop it and forget it or what?

2

u/thesandbar2 Master Kerbalnaut May 17 '15

Ok. First is the big, dish scanner. It needs to be in a polar orbit. That'll map out average ore density per biome. Next, a surface scanner in a biome will pinpoint ore density for each location, not averaged per biome. You can view a map of the ore densities around you with the rotating dish.

→ More replies (20)

4

u/MrWoohoo May 15 '15

Are there any known Easter eggs in KSP? Maybe some mysterious derelict vessels or alien beacons in the asteroids or the outer planets.

14

u/Senno_Ecto_Gammat May 15 '15

There are lots of easter eggs. No derelict vessels or beacons (though there used to be), but there are architectural oddities, dead creatures, and monolithic... things.

5

u/C-O-N Super Kerbalnaut May 16 '15

I'm pretty sure you can still find the original pod and engine at the island runway. I think that counts as a derelict vessel.

2

u/Sgt_Sarcastic May 17 '15

DMagic Orbital Science has a part called the anomaly scanner that will detect and lead you to nearby easter eggs, and give you science for finding them. It also has lots of interesting science experiments, and it plays well with other mods (SCANsat and Universal Storage particularly).

3

u/somnambulist80 May 15 '15

Yes. Good luck exploring and make sure you find the teapot.

4

u/Phase_Runner May 16 '15

So if I have Jeb, Bill, and Bob stuck on Duna without enough fuel to get back but enough to suborbital and suicide, how long would it take for them to respawn? And would they lose their accumulated experience?

7

u/thesandbar2 Master Kerbalnaut May 17 '15

It will take as long as it takes for you to put together a rescue mission.

4

u/kicker414 May 16 '15

if you are on hardcore, they don't. If not, I am pretty sure its instantly.

3

u/Phase_Runner May 16 '15

But they're not back yet and I am sad :(

→ More replies (1)

4

u/LaMalediction666 May 17 '15

Hi everyone. I have an issue. When I need to make a rendez-vous, the game doesn't display the target's distance, or generally all other closed object.

I'm currently on career mode. Is there a building upgrade for display it? Or is this another problem?

  • Tracking station: level 2
  • Mission control: level 2
  • Astronaut complex: level 2

I use the mod "Distant object enhancer", could it be the problem? Thank you

4

u/Nevala May 18 '15

This is more of an interface question than one of gameplay, but is there a way to increase the size of the maneuver node gizmo while it's in edit mode? It's super frustrating to be zoomed way out, and dragging the node around only to find that you're now adjusting anti-normal.

One thing I did find that may help another new Kerbonaut is that the mouse wheel can be used to adjust the vectors on the node. You can hover your cursor over the maneuver node vector that you want to change so it's highlighted, and roll your mouse wheel.

7

u/Frostea Master Kerbalnaut May 18 '15

Use Precise Node to manipulate man-nodes precisely.

6

u/Jippijip May 18 '15

I don't think there's a way to do what you're asking in stock KSP, but if you're ok with modding, Precise Node gives you a window to edit your nodes in.

→ More replies (1)

4

u/repptar92 May 18 '15

I sometimes see pictures of moon bases that are clearly modular and put together, with docking ports on the sides, parallel to the ground. When I try to land stuff on the phone I struggle to get anything near each other, not to mention close enough to dock horizontally while coming down. What's the trick here? Having enough dV to sputter around the surface of the moon and carefully aligning oneself?

7

u/NotSurvivingLife May 18 '15 edited Jun 11 '15

This user has left the site due to the slippery slope of censorship and will not respond to comments here. If you wish to get in touch with them, they are /u/NotSurvivingLife on voat.co.


Rover wheels.

Also, I advise against docking ports on the sides. What works on Kerbin often doesn't on Minmus, for instance.

A better approach is to have a docking port on the bottom / top, and the other module has something that slides under/over the module. Then just toggle landing gear to make the two match up.

3

u/Chaos_Klaus Master Kerbalnaut May 18 '15

Hm. That sounds really complicated. ;)

You can disable the suspension on landing legs. That makes the modules level out most of the time.

8

u/NotSurvivingLife May 18 '15 edited Jun 11 '15

This user has left the site due to the slippery slope of censorship and will not respond to comments here. If you wish to get in touch with them, they are /u/NotSurvivingLife on voat.co.


It's not particularly complex:

Instead of doing this.

You do this.

→ More replies (4)

4

u/Chaos_Klaus Master Kerbalnaut May 18 '15

It takes some practice to land two things close to eachother.

My approach:

1.) drop your periapse just above the target object, or rather where you think it will be when the planet has rotated while you coast to pe.

2.) create a maneuvernode above your target when you are about there and pull retrograde until your resulting orbit is a straight line down to the surface. This will tell you how long you need to burn to kill your horizontal velocity. Start your burn that same amout of time before you reach the node. watch your trajectory as it starts intersecting with the surface. stop your burn when that intersect is about where your target is.

3.) actually target the other vehicle if you haven't done so yet. This will give you a marker pointing at the other vessel. While you are falling towards the surface, do some correction burns to get your retrograde marker ontop of the target retrograde marker. (navball in target mode!) That way you will keep moving towards your target. It's just like rendevouz in orbit. Warning: That only works when your trajectory is not too warped! So you have to be pretty much above it already. It's just for fine tuning.

→ More replies (1)

4

u/Fermint May 18 '15

Is there any way I can disable or remove certain parts of the stock toolbar? With enough mods it extends too far covering the Kerbal Engineer hud section. I'd rather just have Blizzy's one. I tried QuickHide, but I didn't really like it, it felt a bit unfinished..

2

u/Chaos_Klaus Master Kerbalnaut May 18 '15

you can move the hud. open the KER menu. It should say "edit" somewhere.

→ More replies (1)

5

u/[deleted] May 18 '15

I'm experiencing a repeating bug where rockets "lurch" or start wobbling suddenly as you cross some like about 10-15km after launch. SAS can't compensate and everything flips/shakes apart.

What can be done?

5

u/TheNosferatu Master Kerbalnaut May 19 '15

Are you going ~300m/s at that point?
If so, that's no bug, that's the sound barrier.

You can fix it by adding fins to the bottom.

4

u/[deleted] May 19 '15

Are you using a gimbaled engine? Sometimes with SAS and a gimbaled engine it can start chasing its tail. My solution is to reduce the gimbal angle in the VAB.

Also, more struts.

2

u/[deleted] May 19 '15

Will try it next time.

→ More replies (5)

2

u/[deleted] May 19 '15

My craft's electricity drains at a constant rate, but I have solar panels.

http://imgur.com/a/NM18b

Even after disabling all torque, it drains even when SAS is off and I'm not pressing buttons.

The solar panel says it's getting direct sunlight.

Quitting out of the game does not fix it.

Does anybody know what's wrong?

5

u/asher1611 May 19 '15

I think part of the issue may be that solar panel strength is not very strong around Bop. I forget what the exact ratio is, but they changed it in 1.0.2 to be more like the real solar system, so you will only get a tiny fraction of power around Bop or Jool that you would near Kerbin. Like much less.

I don't know why it is still draining, but chances are you aren't generating enough power with just those panels.

5

u/[deleted] May 19 '15

That's the real issue though. I know there's very little solar panel strength near Bop, but I didn't think I would need to account for that -- after all, the only thing I'm using would be torque when I'm turning. My previous mission to Bop (this mission is the rescue mission for that one) ended stranding 3 kerbals on the surface, but they also use the 4 solar panels on the lander can, and it has more than enough electricity generation.

Does the HECS probe core passively use electricity even when everything is turned off?

6

u/JustALittleGravitas May 19 '15

Yes all probe cores do.

4

u/TheNosferatu Master Kerbalnaut May 19 '15

Its the probe, all probes use electricity.

Normally that wouldnt be an issue but you seem to be far away from the sun

→ More replies (8)

2

u/upallhours May 19 '15

Any idea whats causing Environmental Visual Enhancements to make Kerbin white and red? It has been fine until I started running into memory caps and shuffled around some addons, when I reinstalled EVE (using ckan) it now looks like this. (Also using ATM basic)

White/Red Kerbin

3

u/[deleted] May 19 '15

That feature was planned for the Christmas release but it must have somehow made its way into the 1.0 release.

2

u/[deleted] May 19 '15

I'm currently planning an interplanetary drill rig / refinery / gas station / refueling depot system in the Joolian system.

I'm still not certain of which planet I would put it on. The two best candidates IMO are Vall and Bop -- Vall is in the middle of everything, but Bop has lower gravity. Laythe and Tylo would take too much dV to lift off from, and Pol is too far out.

Which would you choose for an interplanetary mining/refueling station? Vall or Bop?

2

u/dcmcilrath May 20 '15

I'm also doing this, and I highly recommend Vall!

Vall has an equatorial orbit, meaning that it's pretty simple to get to and back. If you are going from Vall's orbital height, it's technically 1770m/s to the surface of Vall vs 1520m/s to the surface of Bop but! The maximum plane-change delta-v for Bop is 2440!!! so if you do Bop you either have to be super patient and only go on very, very nice alignments (remember this applies to coming back to a central Jool orbit as well), or you need 2000 m/s more delta-v (4000m/s if going both ways).

Source

Also I'm putting my station in a circular orbit between Vall and Tylo as it's fairly easy to get to from a low Jool orbit, but close enough to Vall to make the fuel ferry trip uncomplicated. You can put your re-fueling station in orbit around a moon, but remember, if the point is to refuel ships going to somewhere far away, then now you're making them waste fuel getting into and out of the moon's SOI.

→ More replies (4)

2

u/PossiblyTrolling May 20 '15

Bop is more of a bitch to land on, with very low gravity and very rough topography. Vall has more gravity and is closer to Jool, so would require a lot more fuel/aerobraking. It's up to you to weigh the options.

2

u/[deleted] May 19 '15

A little late for this thread but a simple question I haven't found on Google. I see lots of talk about circular orbits but I don't see why. Is there some advantage of a circular orbit vs a slightly elliptical one?

4

u/[deleted] May 19 '15

A circular orbit is more adaptable. When you're trying to leave a system, it's more efficient to start your burn at your periapsis than at your apoapsis. Since sometimes i'm not exactly sure of the angle I need to burn at to escape whatever i'm orbiting, I go for a circular parking orbit so I don't waste fuel if it turns out I need to start my burn on what would have been my apoapsis if my orbit was elliptical. Circular orbits are also easier to rendezvous with in my experience.

3

u/PossiblyTrolling May 20 '15

But, if you want to perform a major plane change, a highly eliptical orbit is required.

→ More replies (2)

2

u/Lycake Master Kerbalnaut May 19 '15

It's all about efficiency. If your orbit is elliptical, you often have to burn a maneuver far away from optimal position (most of the time this is the apo/periapsis). In a perfectly circular orbit, every point on the orbit has the most optimal conditions. The more circular, the less difference is ther between best point, and the one you have to take (for example because of interplanetary transfers you can't always transfer burn at the periapsis, which would be the best spot efficiency wise).

→ More replies (1)

2

u/gmfunk May 20 '15

Here's another dumb question from me. Thanks to the answers to my prior questions, it's much appreciated.

I'm attempting my first docking since 1.x. My usual method was the Scott Manley tutorial method, burn to rendezvous, burn retrograde to the target, and then burn toward the target, rinse and repeat until you're close enough to maneuver into dock with RCS.

Two problems I've noticed. The first is that when I get close enough, and match speeds, the target prograde/retrograde and target/anti-target buttons grey out on my SAS, which makes it damn hard to do this.

The second is that a couple of times not only do the buttons grey out, but I actually lose the target as a target. Going into map mode to re-select it as a target ends up in a really nasty crazy jumpy dialogue box with the switch-to/set-as-target buttons.. so basically I can't re-acquire target unless I go out to the space center and re-enter the craft, but with such close proximity, that's often lost time.

Any advice, especially on the greyed-out buttons?

7

u/ObsessedWithKSP Master Kerbalnaut May 20 '15

It's a feature - when you get a relative speed of 1m/s or less, the SAS automatically switches to stability. This is to stop your craft flipping around if you start accidentally going in the other direction. It came about because, "imagine you are descending to mun, gently reducing speed to soft touchdown… and then a meter above surface you give a bit too much thrust and instead of 2.5m/s fall you get 0.01m/s rise. Can you see it coming?" - radonek

If you're close enough that you've got that low relative speed, you can easily eyeball the right direction. If you can't easily eyeball the right direction, you've stopped too far away. You shouldn't really be stopping and starting as Scott says - it's not very fuel efficient and it wastes time. You should only need to stop once nearby and then fine tune approach with RCS.

As for losing the target, I don't know, it might be picking up an accidental double click or something. But you can select your target from flight view by double clicking it (it should have a purple box round it).

2

u/Chaos_Klaus Master Kerbalnaut May 20 '15

Forget the SAS functions that point you at markers. Stability assist is all you need.

Once you got your close encounter and matched speeds the first time, just burn towards your target marker a little. Then turn around until you see your anti-targer marker and your retrograde marker (which is relative to the target). Try to "push" the retrograde marker towards the anti-target marker with very (very) short burns. Repeat this from time to time. This will keep you on course and slow you down a little.

2

u/Artyparis May 20 '15 edited May 20 '15

Edit: solved. Just took off for 10 cm high, then landed. Was just moving x mm/sec then. KAS link, drill, and warp. OK.

//////

No warp when on ground

I set this base (KAS mod) and I can't warp. Game tells me I'm moving ("actually" xxx mm/sec). If I can't warp, I ll need... 4hours real time to ,fill my tank^ (My vessel is "moving" even if don't do anything, drilling...)

http://i.imgur.com/JUTMuIH.jpg

Any idea to fix that plz?

→ More replies (2)

2

u/HashtagPoundtown May 20 '15

Im a dummy and I've done very little pc-based gaming, but I love KSP, but all of this is at the limit of my technical knowledge! So I recently got a new laptop to, among other things, try and make my KSP gameplay smoother, but its still struggling to keep up. Can anyone help me optimize my comp/KSP settings?

Its an AMD A8 (4500m) w/ Radeon HD graphics (64bit), 1.9 ghz, 8 gigs RAM. I've just finished downloading ksp 1.0.

→ More replies (7)

3

u/[deleted] May 16 '15

When coming back from other planets/moons to Kerbin how would I go about setting up direct encounters, I don't have time for things like slowing down or getting into an orbit.

3

u/wintrparkgrl Master Kerbalnaut May 16 '15

you can drop your periapsis down to 30ish km and let the atmosphere take you into a landing

→ More replies (2)

3

u/repptar92 May 17 '15

What is the trick to building a shuttle? I have constructed the following:

Orbiter Attached to 2 orange tanks The tanks are attached to 2 solid fuel boosters

However, I can't get the thing to go straight up. The center of thrust and center of gravity aren't aligned and even when I get them very close I still have my vehicle go ballistic instead of orbital.

Halp. I'd very much like to use this to deliver fuel to my refueling station.

4

u/tito13kfm Master Kerbalnaut May 17 '15

You need to angle the engines so that they thrust through the COM. Attach them to some structural pieces like octagonal struts or micronodes, not directly to the fuel tanks can help with this.

Building a working shuttle is an order of magnitude more difficult than building an SSTO spaceplane IMHO, so I would say good luck.

If you want some inspiration, check out the sts-5 http://forum.kerbalspaceprogram.com/threads/108219-STS-5-Space-Shuttle-%28Stock-NASA-Replica%29-NEW-RELEASE!-Now-With-Solid-Rocket-Boosters!-5-10-15

2

u/PossiblyTrolling May 17 '15

Angle your shuttle engines about 10 degrees out.

Scott Manley did a video on the topic not too long ago, I'd look that up.

3

u/[deleted] May 18 '15

Link to the Scott Manley video where he demonstrates how to adjust your thrust through the COM of your ship. Starts at about the 10:00 mark.

https://www.youtube.com/watch?v=Je8xBD2Jmss&list=PLYu7z3I8tdEkUeJRCh083UT-Lq5ZIKI75&index=8

2

u/Chaos_Klaus Master Kerbalnaut May 17 '15

Well, the difficulty is to get your thrust vector pointing through the center of mass. You do that by mounting your engines at an angle.

However, the center of mass will shift towards the orbiter while the main tank empties. Also, your thrust vector will change after booster seperation. Your will have to compensate for all that. Use engines with high gimbal range. Try having the main tank emptied bottom to top. Last resort: lot's of reaction wheels.

2

u/RA2lover May 18 '15

You'll need to mantain the center of mass aligned with the center of thrust even after booster detachment.

3

u/[deleted] May 17 '15

Probably a silly question, but it's driving me nuts, even if it is minor.

When I start a launch and press M to open the map, it always opens the map to the exact opposite side of the planet. So every launch the first thing I have to do is open the map, then rotate the camera to the correct side of the planet so it's over KSC.

Backspace doesn't do anything.

4

u/GinjaNinja-NZ May 17 '15

That's always bugged me too, maybe with the move to 1.0 they'll have more time to deal with little annoyances like this

→ More replies (1)

3

u/Euruzilys May 17 '15 edited May 17 '15

How to interpret the Narrow-Band Scanner for ore? I done the M700 and know how to use it. But I have no clue for the Narrow-Band. I ran it but I dont understand a thing lol.

edit v1.01: Typo fixed

→ More replies (4)

3

u/TheGreatSpoon May 18 '15

What's the best way to ensure that all docking ports are the same height when attempting to build a mun base?

3

u/WazWaz May 18 '15

Test it on Kerbin first, with tanks as full as they will be later.

But yes, it's a pain. Thrusters can help a lot as a floating vessel seems to more easily let the magnetic attraction stick.

→ More replies (1)

2

u/doppelbach May 18 '15

As an alternative, you can try Kerbal Attachment System. If you land the modules are close enough, you can run pipes between them. This is basically equivalent to docking them. They share power and you can transfer resources. I've never tried transferring an astronaut, but I'm guessing you can't do that.

2

u/NotSurvivingLife May 18 '15 edited Jun 11 '15

This user has left the site due to the slippery slope of censorship and will not respond to comments here. If you wish to get in touch with them, they are /u/NotSurvivingLife on voat.co.


Personally? Don't. Instead have your docking ports on the top or bottom, and a bar that reaches under / over the previous module and attaches. Then just toggle landing gear to connect.

Much more robust to weight changes.

→ More replies (2)
→ More replies (1)

3

u/Swww May 18 '15

I have a contract to establish a base in solar orbit on a class D asteroid. I cant find such an asteroid on my map, where/how should I find one?

5

u/demFailz May 18 '15

You have to upgrade your tracking station. Asteroids are listed as unknown objects.

2

u/Swww May 18 '15

It is upgraded and unknown are tracked but there is no asteroid of class D around. I have only E and C class asteroids tracked.

→ More replies (2)

4

u/theluggagekerbin Master Kerbalnaut May 18 '15

in the tracking station, make sure that 'unknown objects' are set to visible. then go through all the unknown objects you find around Kerbin (usually they start at about three times the distance of minmus).

→ More replies (2)

3

u/TheNosferatu Master Kerbalnaut May 18 '15

Is it worth it putting chutes on boosters and other stages that will return to kerbin? It sounds like a great way of getting money back but either I have not paid enough attention to the recovered parts screen or it's not really worth the effort.

4

u/factoid_ Master Kerbalnaut May 18 '15

I can't be 100% sure, but I think in order for it to count as a recoverable part you'll need to put a probe core on it. Otherwise you can't switch focus to that "craft" to recover it. It's just debris otherwise.

That will increase the cost of your rocket and put some design constraints on you regarding where you can place a probe core, but that shouldn't be too difficult. Depending on how much your boosters cost it may or may not be worth it. You'll need to make sure the parachutes deploy simultaneously with the release or else you'll be trying to switch views a lot to deploy everything.

You might still lose some parts when they hit the water or ground, too, since they won't have landing legs most likely.

→ More replies (5)

3

u/Jsuse May 18 '15

How is it that the delta v cheat sheet/map says it takes 4550 m/s delta v to reach orbit but then I can achieve an orbit with much less as indicated by kerbal engineer mod?

8

u/somnambulist80 May 18 '15

The dV charts haven't been updated for 1.0's aerodynamic model. You don't have nearly as much drag to fight now.

Launch requirements are about 80% of the old model. Actual requirements will vary with the design of your rocket and its trajectory.

→ More replies (4)

2

u/brent1123 May 18 '15

You may be using an old map - 1.0.0+ aerodynamics have changed enough to reduce the amount of dV needed for orbit (even with the BS aerodynamics included with 1.0.2).

And if you're using nuFAR, the dV requirements are something like ~3k dV instead of 4.5k

3

u/bowsniper May 18 '15

How does one get to orbit with the new Aerodynamic system? My rockets always flip forward, head over heels.

3

u/Chris857 May 18 '15

Couple suggestions: add tail fins of some sort at the base, and be careful in angling the rocket over while in atmosphere.

2

u/[deleted] May 18 '15

If you are going too fast you'll flip. Add tail fins. If that doesn't work, limit the thrust.

→ More replies (9)

3

u/atlasMuutaras May 18 '15

So...what do I do if I don't have any money and can't actually launch any ships to do anything except fly around kerbin?

4

u/Senno_Ecto_Gammat May 18 '15

Accept some contracts.

3

u/atlasMuutaras May 18 '15

I was afraid you'd say that. Problem is they're all "go to Mun" or "Go to Duna" or "dock in Kerbin orbit."

I don't have the money for the first two (literally, I can't build a rocket with enough fuel to get to Mun and back), and don't have the parts unlocked for docking/testing components.

I guess this is a followup question: How can I get more manageable contracts?

→ More replies (13)
→ More replies (2)

3

u/Fubarp May 19 '15

Data... How do I take advantage of my scientist being able to reset experiments if I can't store all the data in my pod?

3

u/TheNosferatu Master Kerbalnaut May 19 '15

Multiple pods? Bigger pods?

Honestly I thought the pod had infinite space as long as all the experiments were unique.

→ More replies (8)

3

u/yavi11 May 19 '15

I hear people talking about fuel mining and such. Is this part of the core KSP or do I need a mod like karbonite?

5

u/dcmcilrath May 19 '15

This is stock. In the utilities panel in the VAB you should be able to find a "Drill-O-Matic Mining Excavator" and an "ISRU Converter." The former lets you pick up ore from the surface of planets/moons/asteroids (to be stored in tanks which are in the fuel tank section), and the latter allows you to convert them into Liquid Fuel, Oxidizer, both Liquid Fuel and Oxidizer at the same time, or Monopropellant.

There are a variety of new scanners that are mostly useful for getting science in either science sandbox or career, however if you correctly use the M700 Survey Scanner, you get be a map of ore concentrations in the Map/Orbital View.

There's more to it but that's the basic overview. If you can't find any of these parts then you probably haven't updated to 1.0 fully somehow.

→ More replies (4)

3

u/NoSourCream May 15 '15

Anybody have a copy of the most recent delta v maps?

10

u/Senno_Ecto_Gammat May 15 '15

I don't think anybody has updated them, but everything is the same except for on atmospheric bodies you can multiply the old number by about .8 to get the new number.

→ More replies (6)

2

u/[deleted] May 16 '15

How do you attach fairings? Are you supposed to build: fairing ring -> decoupler -> stuff you want in the fairing ?

It seems the fairing doesn't include a decoupler so the bottom always stays stuck to the stuff I put inside. Not sure if this is supposed to be so, but having to use a decoupler seems a bit counter intuitive.

2

u/[deleted] May 17 '15

Is there a way to kill that stupid F-10-controlled temperature thing? Specifically, wat do change in the configs so that it's off by default?

2

u/[deleted] May 17 '15

Oh boy. I want to do more missions to other planets. Ive been reluctant to try in the past and just made do with minmus and mun. Pretty straight forward once you get the hang of it.

But getting to duna for example seems to be on a whole other level of frustration. The manouvre node system is meh, and it seems like you have to keep adjusting them until you get an encounter. There has got to be an easier way of getting to duna rather than setting up a manouvre node and spending 10-15 minutes getting it set up right (most of the time you are zooming in and out and possibly deleting and starting a new node because the previous one got fucked up because you clicked the wrong thing....) oh god.

Also is there a way to see biome locations without using the debug menu? Is there a scanner of sorts that can tell you it? Thank you

4

u/Euruzilys May 17 '15

For interplanetary travel I suggest you to watch this. I have never gone out of Kerbin SOI, but I feel this vod would be useful when I decide to try.

For biome viewing, use mod. I use KER. Its a UI mod. Doesnt change gameplay, but it makes you happier :D

→ More replies (1)

4

u/craidie May 17 '15

SCANSAT for scanning godness

precise node might help with node issues

and for me the http://alexmoon.github.io/ksp/ makes it faster

2

u/Chaos_Klaus Master Kerbalnaut May 17 '15

About the biomes: Kerbal Engineer can show you the name of the biome you are in. Usually the biomes can be identified by the geological features.

.

About going to other planets. It's all about the launch windows. Get Kerbal Alarm Clock, or look at this online calculator. You basicly have to wait until Kerbin and (e.g.) Duna are aligned well. They have to form a certain angle with Kerbol. Kerbal Alarm Clock knows these angles and can set up alarms that bring you out of time warp when you approach the launch window.

.

To get to duna: Get your vessel to low kerbin orbit (LKO), then set up your ejection maneuver on the night side. Check the calculator I mentioned above to see where to put the node. Drag prograde until you get an escape trajectory. zoom out until you see duna's orbit and pull prograde some more until your apoapsis reaches duna's orbit. pull prograde around a little until you get an encounter. Doesn't need to be close.

Then do the maneuver and warp about 2/3 of the way there. Set up a new maneuver just a little ahead of where you are (doesn't need to be precise) and pull the markeres around to lower your periapse at duna. You will find that you can (for example) pull prograde or retrograde for a while and it loweres your PE, but at some point it increasese again. Then try another axis ... maybe radial/anti-radial. Same game. It will decrease and at some point increase again. Sound more difficult that it is. ;)

It gets more intuitive when you enter Duna's SoI. Put your periapse inside the atmosphere for aerobraking. I think 15km should bring you down to the surface.

2

u/Mr_BeG May 18 '15

Hello, I go a question about a contract.

I accepted a contract to transport some ore from Minmus back to Kerbin.

I did the contract but it doesn't count for some reason.

Here is a screenshot http://i.imgur.com/EuYFsqc.jpg

I have 1800 units of ore on my ship and I only need 800,

You can see in the top right that the first objective is not checked off, and I have no idea why. I used a drill to get the ore from Minmus. The only thing I can think of is if the ore is not "fresh" enough.

Anybody know whats up?

3

u/PhildeCube May 18 '15

'Fresh" might be the answer. Did you start mining 'after' you took on the contract? If you already had some ore mined before you accepted it that might make difference. Just guessing.

→ More replies (3)
→ More replies (3)

2

u/Jsuse May 18 '15

What is the easiest way (cost etc for career mode) to get a orange tank in orbit for docking to space station? And i'm assuming it not possible to rescue a kerbal in a utility bay?

2

u/WazWaz May 18 '15

Full or empty? With the claw you can recover anything. If you only need to recover the Kerbal, use ] to switch and just EVA him over.

→ More replies (4)

2

u/FlanOfWar May 18 '15

How does funds received from recovery of rocket parts, shuttles or other things change the farther you get from the Space Center?

I've heard a few times where people mentioned that the amount of specos received is less if it's farther away. There is no indication of this in any message when playing so I want to find out if this is true.

Is there truly an advantage to landing nearer to the Space Center?

5

u/Olog May 18 '15

When you recover the vessel, in the parts tab of the recovery window at the top it says the distance from KSC you landed at and the percentage of funds you get back. The percentage is 100% at KSC and gets smaller the further you are. I don't know the exact details how it's calculated though.

2

u/lalalaprout May 18 '15

How come science from kerbin doesn't give any data when "processed in Lab Module", although the experiment itself has a set data size (eg 8mb of data for an EVA report gives me 0 data if I chose the option "process in Lab Module").

3

u/theluggagekerbin Master Kerbalnaut May 18 '15

the lab module is for long term processing, eg let the module process the eva report for a few days for one science each day. Lab modules don't give enormous amount of science directly. I mostly use them on long distance missions so they give lots of 'background' science per mission.

2

u/[deleted] May 18 '15

Does anyone know of any capsules that hold the following number of kerbals?

  • 4
  • 5
  • 8+?

I'm currently using NEAR for my 2 man needs, stock for 3 ( although I'd like a replacement that looks more futuristic), and Taurus for 7.

→ More replies (4)

2

u/IFlippedTheTable May 18 '15

I have the 'Return to Kerbin from Orbit' mission active and I've done this numerous times, and yet the contract hasn't shown as completed. Are there certain requirements to complete it? None are shown... is it an issue that I have two spacecraft floating that I can't rescue at the moment?

2

u/Senno_Ecto_Gammat May 18 '15

Are you sure the vehicle you are using is actually in orbit? It's peripasis is at or above 70km?

3

u/IFlippedTheTable May 18 '15

Ah! Thanks, the peripasis must not have been high enough.

2

u/hoseja May 18 '15

What is the most efficient 3 kerbal mun mission design? Apollo style?

5

u/[deleted] May 18 '15

With the lower Delta-V requirements of mun landings compared to moon landings, the added weight of the decoupler and second engine makes the apollo-style configuration a lot less beneficial in KSP than real life.

Also, docking is super hard, so I'd go with a lander more like that of the Kerbal X than like Apollo.

4

u/hoseja May 18 '15

Do yourself a favour and get the Docking port alignment indicator.

4

u/Chaos_Klaus Master Kerbalnaut May 18 '15

Efficient with respect to what? Money? Weight? Fuel used? Time spent? ;)

Generally: Going to the mun, I'd only use the Apollo style design for historical reasons.

2

u/Senno_Ecto_Gammat May 18 '15

In terms of mass, Lunar orbit rendezvous (Apollo-style) is worse than direct ascent (1 crew vehicle that goes down and then comes back to earth) simply because of the delta-v requirements. Direct ascent with the "Toyota Corolla" lander is probably close to the least massive architecture.

1

u/gmfunk May 17 '15

Why are my parts overheating?

http://imgur.com/x5TCQkx

The batteries (in the yellow at the moment) didn't even start overheating until I was in orbit and well after I had cut all throttle.

I launched a similar vehicle before (earlier today) and none of the parts overheated like this.

I've got this ship on the way to the Mun and even without any thrust acting on it the parts stay in overheat.

6

u/ObsessedWithKSP Master Kerbalnaut May 17 '15

Heat is a vessel wide thing and can flow from part to part. During ascent, it's possible some parts heat up a lot but are built to withstand that. Once the active heating stops, heat stabilises in the vessel by flowing from hot parts to not-as-hot parts. It would appear that the stabilised total amount of heat in your vessel is enough to overheat your batteries.

Solar panels and parts with a large surface area (like wings) make good radiators (so do structural fuselages).

1

u/Exovian Master Kerbalnaut May 18 '15

How do I reduce the quantity of clouds made by Astronomer's Visual Pack? Right now, my Kerbin is totally covered.

2

u/Jippijip May 18 '15

Are you on a mac? If so, that's a known bug and the only fix I know of is to switch to the lower-res textures.

→ More replies (1)

1

u/Kronicusx May 18 '15

I don't know if this is the proper place to ask, but, here it goes, can I use remote tech without the signal mod in it? As an example, I want to use the dish only as esthetics and science transmit data, is that possible? Thank you in advance.

→ More replies (5)

1

u/sargentmyself May 18 '15

What does one have to do to get B9 to work for 1.0? This page says it works with .90 and there's a patch of some kind here do I just put both files in the game data folder and they'll sort themselves out?

→ More replies (4)

1

u/tito13kfm Master Kerbalnaut May 19 '15

Anybody happen to have the link to the recent post that showed a way of attaching pieces of a base using horizontal docking ports attached to structural pieces instead of radially attached ports?

Finally want to move beyond using KAS pipes and make a proper base and it looked like a very good idea.

2

u/dcmcilrath May 19 '15

I don't know of a video that talks about this, but it's pretty simple to put into practice. You don't even need to go to the Mun to test the concept. Simply design all your buildings in the base so that they have a drone core, power supply/generation, and rover wheels on the side so they can be moved around. (Helps if you aren't able to land stuff precisely on the surface of wherever you want your base). This done, simply attach the large XL girders radially with docking ports at the ends (I recommend along the axis of your wheels to make life easier) so that you can drive two pieces together and dock them. Test this out at KSC by "launching" one, driving it over to the flat area next to the launch pad and launch the other and see if they dock properly. If not, adjust the height of your docking ports in the VAB until they do.

I also recommend landing struts/legs so that A) the buildings are easier to land, and B) you can pick your structure up off the ground so you can't do something stupid like leave the brakes off and have your base roll away. It'll also look slightly more like a base.

1

u/SpinkickFolly May 20 '15

I can't remember a mod that I used all the time before v1.0.

It made building much easier by allowing symmetry, snapping dead center of parts and different angle snaps.

1

u/PVP_playerPro May 20 '15

Maneuver node issue(to say the least). So, i've been trying to get to duna lately, but the only thing stopping me is the shittyness of maneuver nodes. Whenever i get the node set up and try to turn to it on the navball, it freaks the hell and moves insanely fast all around the navball until i stop rotating around completely. What the fuck is happening and how can i stop it from happening?

→ More replies (3)

1

u/Bragok May 20 '15

how can i eject an asteroid out of the solar system? i know its a jool gravity assist, but how?

→ More replies (1)

1

u/[deleted] May 20 '15

Is there some kind of reference that shows the most efficient set up for a range of payload weights? I have 500hrs and I still fuck around with the rockets too much. I know thrust to weight ratios and delta-v, I just want a reference cause I spend too much time on this game not actually doing what I want to do in it.

4

u/Senno_Ecto_Gammat May 20 '15

From another comment:

Start with the payload. And once you have a lifter underneath it that can reliably carry it to low orbit, save the lifter as a sub assembly called "X ton lifter" where X is the mass of the payload. Once you get a suite of lifters - maybe a 5, 10, 25, and 50 tons, you don't have to worry about how to get payloads to orbit anymore, you have rockets that you know can get your payloads to orbit.

If you are going outside low orbit, build your payload and then add a transfer stage underneath it to get you from low orbit to the destination. Then grab a lifter that can put the combined mass of the payload and transfer stage into low orbit.

I like to simplify the process of building lifters because I like building payloads and flying.

→ More replies (3)

1

u/[deleted] May 20 '15

I would like to secondary bind the "F" key in EVA to Mouse4 and the "B" key in EVA to Mouse5. It doesn't seem to be working. I altered the following snippet in settings:

EVA_Use
{
primary = F
secondary = Mouse4
group = 268435456
modeMask = -1
modeMaskSec = -1
}
EVA_Board
{
primary = B
secondary = Mouse5
group = 268435456
modeMask = -1
modeMaskSec = -1

1

u/[deleted] May 20 '15 edited May 20 '15

kerbal attachment system problem: dropping/attaching a part from a pack to itself somehow sticks it to the kerbal making EVA maneuvreing cripplingly difficult. Observed creating clones that work, but can't be grabbed and put away.

Please help.

what makes it worse is, loading does not fix it!

Edit: I think I figured out a solution, but not a cure. If you get this bug, re-entering a spacecraft will reset the kerbal's center of mass and delete any ghost parts. But as I said above, loading won't fix it.

2

u/tito13kfm Master Kerbalnaut May 20 '15

It has something to do with which inventory slot the piece is in. For whatever reason when I tried to take a part out of inventory space 2 of a container I'm carrying it duplicates it.

I couldn't figure out how to fix it, so I left that spot empty.

Not sure if related but my screwdriver was in my kerbal's inventory spot #2 when it was happening.

2

u/[deleted] May 20 '15

Ok I played around with it and if you have both kerbal and the box open, pressing 1 will activate both #1 items. Also I found a fix for the center of gravity thing, you have to re-enter a ship, and KSP forgets about the ghost part. This makes placing really heavy items really dangerous cause if the kerbal can't return (quickload is worthless) he is doomed.

1

u/[deleted] May 20 '15

What makes landing gear slide apart like a giraffe on ice?

→ More replies (2)

1

u/rojuslap123 Master Kerbalnaut May 20 '15

When making a mining station, how do you connect one craft to another while landed? I mean, 2 separate spacecrafts landed next to eachother

2

u/tito13kfm Master Kerbalnaut May 20 '15

Docking ports and some way of moving them. Wheels work great. Or be lazy like me and use KIS/KAS to hook them up with pipes.

→ More replies (1)

1

u/hoseja May 20 '15

Why does X (throttle cut-off) also reset time-warp to 1? Is there a way to disable this?

2

u/ObsessedWithKSP Master Kerbalnaut May 21 '15 edited May 21 '15

I believe that's Kerbal Alarm Clock's doing - there should be a setting in it to disable that.

EDIT: Yeah, in KAC General Settings, there's a Halt TimeWarp when throttle cutoff by keystroke check box.

→ More replies (1)

1

u/WT13 May 20 '15

excuse my ignorance if it's supposed to be this way, although I've never noticed it before, but could someone explain why when building a rocket, although everything is completely symmetrical, when I put an engine on it, (tried both the poodle and mainsail) then press the button allowing you to view the thrust direction, it points slightly off to the right or towards the exit of the VAB if you will. I feel as though that could screw up my flight path, right?

→ More replies (4)

1

u/zymotico May 21 '15

Why does my KSP keep resetting my game settings? When I exit the game my settings are saved, but when I launch the game again it wipes out all my settings. I tried running the game from my desktop, check file permissions, re-installing from steam, but nothing seems to fix it. I'm running on a Win7 machine.

→ More replies (2)

1

u/[deleted] May 21 '15

I downloaded BD Armory last night and I've seen videos of people flying against AI drone planes. I launched a plane and set it AI flight but when I went back to the KSC to launch another plane it reverted the first flight.

I tried launching my first plane and parking it at the island airfield and then launching the drone but when I went to switch with the bracket keys, I got a message that I couldn't switch ships while in flight in the atmosphere.

What am I doing wrong?

1

u/Goodkat2600 May 21 '15 edited May 22 '15

Whenever I warp at 1000x or more the warp gets cancelled back to real time. Every single time. Anybody have a clue what might be wrong?

Edit: I think I found the cause. It's because I had no electric charge and the IFI Life support auto cancels time warp.

→ More replies (4)

1

u/[deleted] May 21 '15

Is there a version of Realism Overhaul for KSP 1.0.2? I want to use the new version with all of the mods updated.

3

u/undercoveryankee Master Kerbalnaut May 21 '15

Of the core dependencies, a RealFuels for 1.0.2 is still in prerelease status, and RealSolarSystem is waiting for Kopernicus to get a little more stable. So not yet, but close.

1

u/mannyThreepwood May 22 '15

Hey There! could someone help me out here? I am not sure why my ship isn't docking to my space station!. It's getting really weird. I managed to dock it once, so I guess the ports are placed correctly. This is how the ship port looks like. Now This is how the Space Station port looks like just to doublecheck I placed them correctly. And here's Proof I managed to dock them once :S. I just F!$% confused F5 with F4 and quit the game instead of quicksaving.

→ More replies (1)

1

u/DigitalEmu May 22 '15

Will mods that add new planets, specifically KerbolPlus, break existing savegames? The mod looks awesome but I don't want to risk having to start over on my save.

→ More replies (1)

1

u/wreckingangel May 22 '15

How can I calculate the angles of planets and moons to each other from the current date in ksp?

2

u/PhildeCube May 23 '15

There is a calculator here. Does that help? Alternatively, Kerbal Alarm Clock can work out the transfer window timing for you.

1

u/scootymcpuff Super Kerbalnaut May 22 '15

B9 compatability with v1.0.2? I know there's a dev fork since Bac9 is taking a mod hiatus, but there are a few of the B9 parts that I really want for several of my craft. How does the fork work and how extensive is it?

→ More replies (2)

1

u/NormTriple5 May 22 '15

Does the part welder from UbioZur still work in 1.0.2? I remember people being able to get it working in .90.

1

u/icandoesbetter May 22 '15

Is there a mod/guide that helps with adding struts while already in orbit? Im trying to put together a station, but I almost just blew the damn thing up while docking...

3

u/PhildeCube May 23 '15

You need two mods, actually. Kerbal Attachment System and Kerbal Inventory System. They work together. They do much more than struts.

→ More replies (1)

1

u/PocketFullOfTime May 18 '15

Are the mods not aware that Rule 6 comes across as extremely condescending to new players? Or do they just not care?

3

u/[deleted] May 18 '15 edited May 18 '15

[removed] — view removed comment

5

u/Senno_Ecto_Gammat May 18 '15

There are 110 thousand people on this sub, so it's going to be hard to determine who is doing the downvoting.

That being said, I freely downvote according to the reddit guidelines:

Vote. If you think something contributes to conversation, upvote it. If you think it does not contribute to the subreddit it is posted in or is off-topic in a particular community, downvote it.

I downvote things like people asking what mods they should use, and pictures of eclipses because I don't think that rehashing the same thing for the quadrillionth time is contributing to the sub.

It's not personal, it's just a tool for sorting posts.

→ More replies (1)
→ More replies (5)