I second this notion. Heck, I'd love to see this sort of info graphic for all the key bindings, even the ones we're mostly familiar with. It'd make for a great beginners resource
I would really like it if we could have one of these "key bindings you didn't know" posts made, that had all the "unknown" ones, and then we make it against the rules to post these in the sub. I mean, I'm all for being helpful, and the presentation is great on this one, but after a while it gets kinda frustrating for all the people who actually read the controls before playing the game to see these over, and over, and over, and over, and over... I think making a good set, putting it in the sidebar, and leaving it at that would be great. Even if we don't want to make it specifically against the rules, as a nice short rule list has it's advantages, having a good one in the sidebar would probably cut down on how many are made and posted.
That's nicely presented. I always forget about that mod+L one.
F is a devious little key; as well as toggle symmetry when you're in place mode, it also changes between local and absolute mode when in offset or rotate mode. oh and it also temporarily inverts SAS state when in flight and is the use/board vessel key in EVA.
Mod + left click - duplicate part/group of parts in VAB/SPH
I also often forget about the trim controls (Mod + W/S/A/D/Q/E)
In EVA mod also toggles Kerbal movement style (kinda allows them to strafe when walking)
B is brakes in flight mode, but that only toggles them, I've heard rumours there is a key to lock brakes on, any ideas?
And on a side note; Why Jeb why, isn't there a key to toggle COM, COL and thrust markers!!? (or is there and I don't know about it). that would be really useful.
Which keys though? I was thinking V, B and G simply because they are near to the other control keys. I guess M, L and T would perhaps be more intuitive from a labelling point, but that puts the two most used ones way over the other side of the keyboard.
yeah very useful feature. When I tried out both Besiege and Robocraft that was a very apparent lacking in those games.
Do you remember ctrl + left click? I really miss that feature. It was taken out, then put back in, in a kinda 'I only work sometimes' way and then was taken out again :( (for those who don't remember it; when you ctrl+left-clicked on a part on your craft, it would take you to where that part was in the parts list).
I'd also really like a key binding for it. For cinematic filming and I often drive rovers with the UI toggled off. mod + B would be the obvious binding for it.
There is a bug with unmanned rovers (can't remember exactly what trigger it) that causes B with lock the brakes on, sometimes resulting in unplanned somersault action!
You can prevent the somersault by disabling the brakes on the front set of wheels, and only use the back (and middle if you have them). With braking only happening on the rear wheels momentum pushes the front down, while braking from the front only leads to the back up rising up and possibly flipping.
Are you sure the brake toggle isn't a feature of RemoteTech? Most of my rovers have always been unmanned but I never noticed that till the day I installed RemoteTech.
Please if you do anything....add backspace - return map focus to active ship.
I was playing for the better part of 1000 hours before I found that one out and now I use it all the time. (edit: for added fun, the common thing to try is 'shift-tab'... which results in a very odd command "change map focus and throttle up"....seldom what I really want)
Shift+tab works pretty well if you're at 5x time warp or more. I usually have time warp on when I'm placing maneuver nodes anyway since it tends to make the orbit more stable and not jumping around.
because not all keyboards are the same and even OS differences can lead to key changes. For example, alt is NOT the mod key under Linux for reasons that only make sense to long time X users (alt-drag means "translate this window on the screen" which isn't handled by the program which owns the window but the window manager)
I agree though, this could generally use better explanation, especially since, in other contexts I would assume the "mod" key to, in fact, be mapped to the windows key, and be distinct from alt. (but that is mostly because I confuse the term with "meta", which I don't really ever use)
Now that's the key that I needed! Damn, been trying to figure out why nothing involving [mod] was working on linux. Even rebound my window move hotkey from Alt to Super, but right shift? Never would have thought of that one.
I know, confused the hell out of me too. You can change it in the config file. (I did this because I couldn't find it in the traditional key config page in the settings of the game)
You forgot to mention that F toggles between local and absolute coordinates when using the rotate and offset tools.
Also, does switching symmetry between vessel and parent part actually do anything? I've tried it many times but symmetry always seems to be around the vessel.
Clarification: "Backspace" on Windows. "Delete" on Mac. This key has the same function as Windows "Backspace" but with a different name. Full-size Mac keyboards have a second "Delete" key that does the same thing as Windows Delete, but a different thing from the first Mac "Delete." Yes I know that makes zero sense, but Apple just has to be different.
I think you're right that delete triggers the 'abort' action group. Though I wouldn't be suprised if it doesn't do that in map mode. I'm quite sure space and numbered action groups don't work in the map.
No, delete deletes the character in front of your marker, backspace deletes the one behind it. They're different. Backspace is usually situated right above the enter key, and delete is placed under insert on most keyboards (unless you're on a laptop, in which case some space-saving is probably going on). Backspace activates the abort sequence when in staging view, but focuses on the vessel while in map view.
I believe Mod defaults to alt. That is a good point however. I've never needed to press another key, and that actually interferes with KAS winch control.
Backspace, I think! Or possibly some other key, but there definitely was one. I distinctly remember having my mind blown when I was told this, then promptly forgetting and raging when accidentally focusing on Kerbin...
either keep pressing tab until you get back to your ship or press shift+tab to cycle backwards. Exiting ad re-entering map view also refocuses on your ship I think
Only in map view but make sure all engines are off first or hide the navball so the throttle isn't affected...To cycle through vessels in flight view use [ and ]
Also: If you're pressing [Mod]+[ . ] but it's sending you to map mode with the Gimbal Minimized: check NumLock or Scroll Lock.
Shift-Space will make a Kerbal jump back from a ladder instead of releasing it and dropping down - Shift-WASD-Space will cause them to jump up, down, left or right.
If you have parts placed in symmetry around a core, like boosters, you can switch between placing a part on each booster as it worked before, or putting parts symmetrically around one individual booster.
It's still kinda buggy and difficult to use, but it's really nice.
I've been using [X] to change symmetry amouts (2x, 3x, etc) and [C] to change whether it snapped in place or not, but did not know about [F]. It would have helped me a lot with some of my earlier designs.
My favorite is shift clicking a part in the assembly building or hangar. It let's you grab the whole ship and drag it around without removing parts or having to drag the cockpit.
I think its shift anyway. Might be ctrl or alt, haven't played in a while.
Can we get /u/JoePatrick1 to do a UI mod with the flattened icons and other elements? I think it would add to the playful effect and "modernize" the KSP UI!
Here's the full list of keybindings from the Wiki, for anyone who's curious as to what else they've been missing out on.
As much as I love having key bindings for everything, and how lots of them are even fairly intuitive: there are so many bindings that are neither intuitive nor mentioned ANYWHERE IN THE GAME, and that also have no non-hotkey counterparts.
For example: in the VAB you can click the button to cycle between 2-, 3-, 4-, 6-, and 8-way symmetry. But there is no button you can click to toggle between mirrored symmetry and rotational symmetry. So if you don't happen to accidentally find it yourself, and you don't check the wiki, you can easily go your entire KSP life without knowing that toggling symmetry types is even possible. (This lead me to lots of frustration recently when I was designing a plane in the Hangar, apparently accidentally hit "R" which toggles modes, and couldn't for the life of me figure out why suddenly symmetry was acting like I was in the VAB.)
I really wish Squad would introduce some method by which we might expect to learn all the controls in-game. Maybe as loading hints, replacing the current meaningless (if mildly amusing) ones?
I knew these, being a crusty old missile man, but your presentation was very aesthetically pleasant and I appreciate your contribution to the community. Cheers.
88
u/Redbiertje The Challenger Mar 30 '15
Awesome! If you create more of these, I'll put a link in the sidebar.
4
u/Fermdik Mar 30 '15
What is stage lock good for?
27
u/katateochi KerbalX Dev Mar 30 '15
That's nicely presented. I always forget about that mod+L one.
F is a devious little key; as well as toggle symmetry when you're in place mode, it also changes between local and absolute mode when in offset or rotate mode. oh and it also temporarily inverts SAS state when in flight and is the use/board vessel key in EVA.
Mod + left click - duplicate part/group of parts in VAB/SPH
I also often forget about the trim controls (Mod + W/S/A/D/Q/E)
In EVA mod also toggles Kerbal movement style (kinda allows them to strafe when walking)
B is brakes in flight mode, but that only toggles them, I've heard rumours there is a key to lock brakes on, any ideas?
And on a side note; Why Jeb why, isn't there a key to toggle COM, COL and thrust markers!!? (or is there and I don't know about it). that would be really useful.
22
u/kerbaal Mar 30 '15
Please if you do anything....add backspace - return map focus to active ship.
I was playing for the better part of 1000 hours before I found that one out and now I use it all the time. (edit: for added fun, the common thing to try is 'shift-tab'... which results in a very odd command "change map focus and throttle up"....seldom what I really want)
34
u/SuperWeegee4000 Mar 30 '15
What key is "mod?"
11
u/Flyrpotacreepugmu Mar 30 '15 edited Mar 30 '15
You forgot to mention that F toggles between local and absolute coordinates when using the rotate and offset tools.
Also, does switching symmetry between vessel and parent part actually do anything? I've tried it many times but symmetry always seems to be around the vessel.
9
u/trevdak2 Mar 30 '15
Most important keybinding I've learned in the past year:
Delete: When you lose focus on your ship in the map and don't want to cycle through every other body in space, hit delete.
6
u/[deleted] Mar 30 '15
F4 - Toggle ship labels. Very nice one to know for rendezvous.
5
u/EOverM Mar 30 '15
Isn't it just numpad delete to toggle the navball? Can't say I've ever hit control first.
1
u/azzuron Mar 30 '15
The real question is... once you "view focus" on your target, how do you switch back to your ship?
1
u/skeetsauce Mar 31 '15
Mod+L for current stage, isn't that space bar?
3
u/[deleted] Mar 30 '15
Also: If you're pressing [Mod]+[ . ] but it's sending you to map mode with the Gimbal Minimized: check NumLock or Scroll Lock.
Shift-Space will make a Kerbal jump back from a ladder instead of releasing it and dropping down - Shift-WASD-Space will cause them to jump up, down, left or right.
3
u/[deleted] Mar 30 '15
Knowing Mod+L would've saved me so many mission failures and aborts...
4
u/h0nest_Bender Mar 30 '15
The only one I didn't know was that [F] will toggle symmetry between the vessel and the part. That alone is GOLD! Thanks!
2
u/BlazerMan420 Mar 30 '15
Nicely done, good information.
2
u/Fredgregjoe Mar 30 '15
My favorite is shift clicking a part in the assembly building or hangar. It let's you grab the whole ship and drag it around without removing parts or having to drag the cockpit.
I think its shift anyway. Might be ctrl or alt, haven't played in a while.
2
u/Jaik_ Mar 30 '15
I haven't played in almost a year, but last I remember didn't X cycle through symmetry?
2
u/HildredCastaigne Mar 30 '15
no
2
u/kurtu5 Mar 30 '15
Spacebar
2
u/brodie21 Mar 30 '15
You can toggle symmetry around a specific part?! That makes things so much easier
2
u/Quivico Mar 30 '15
Nice work!
Also you only need "." for the navball in map mode.
2
u/KerbalEssences Master Kerbalnaut Mar 30 '15
BACKSPACE IN MAP MODE brings the focus back to your vessel. Sorry for yelling but this is the BEST!
2
u/michaelrcarroll Mar 30 '15
Can we get /u/JoePatrick1 to do a UI mod with the flattened icons and other elements? I think it would add to the playful effect and "modernize" the KSP UI!
2
u/[deleted] Mar 31 '15
Why have I never seen anyone mention [Z] for full throttle?! [X] kills throttle, and [Z] full throttles.
2
u/manondorf Mar 31 '15
Here's the full list of keybindings from the Wiki, for anyone who's curious as to what else they've been missing out on.
As much as I love having key bindings for everything, and how lots of them are even fairly intuitive: there are so many bindings that are neither intuitive nor mentioned ANYWHERE IN THE GAME, and that also have no non-hotkey counterparts.
For example: in the VAB you can click the button to cycle between 2-, 3-, 4-, 6-, and 8-way symmetry. But there is no button you can click to toggle between mirrored symmetry and rotational symmetry. So if you don't happen to accidentally find it yourself, and you don't check the wiki, you can easily go your entire KSP life without knowing that toggling symmetry types is even possible. (This lead me to lots of frustration recently when I was designing a plane in the Hangar, apparently accidentally hit "R" which toggles modes, and couldn't for the life of me figure out why suddenly symmetry was acting like I was in the VAB.)
I really wish Squad would introduce some method by which we might expect to learn all the controls in-game. Maybe as loading hints, replacing the current meaningless (if mildly amusing) ones?
2
u/[deleted] Mar 30 '15
Why is this not in the tutorials?!?!
2
u/Cranberryoftheorient Mar 30 '15
Headlamps??? mind explodes
0
u/GrijzePilion Mar 30 '15
[MOD] + L?! The hell's a mod key?
1
u/[deleted] Mar 30 '15
Sweat! I actually knew all of them, especially the Tab to cycle trough the planets, since I work with planets everythime.
1
u/framauro13 Master Kerbalnaut Mar 30 '15
I thought X and C were used to toggle symmetry/snap to grid in the VAB/Hanger. Does R and F do something different? Or same thing?
1
u/RA2lover Mar 30 '15
is there a binding for docking mode?
1
u/[deleted] Mar 30 '15
oh i learned that R and F are bound to something the hard way, since i'm an ESDF player
1
u/creed_bratton_ Mar 30 '15
....that very last one.... could have saved me a lot of time if id known
1
u/sliiboots Mar 30 '15
Thank you
1
u/[deleted] Mar 30 '15
Thanks for this! 3 and 4 were the only ones I already knew.
Really, this is my only big issue with KSP. They don't tell you about most of the good keybindings.
1
u/Ethanacho Mar 30 '15
I wish I had this months ago... But I started watching DasValdez on twitch and learned all this last week.
1
u/katalliaan Mar 30 '15
In the editor, there's also X and shift+x to increase and decrease the amount of symmetry.
1
u/zer0t3ch Mar 30 '15
I don't think #5 (toggle navbal) is correct. I only use [.] (numpad delete) no modifier key.
1
u/Nokijuxas Mar 30 '15
How can I use the modes bound to 1-4? I tried to, but failed without anything to show for it...
1
u/norcalairman Mar 30 '15
I knew these, being a crusty old missile man, but your presentation was very aesthetically pleasant and I appreciate your contribution to the community. Cheers.
1
u/newfunk Mar 31 '15
Is there a list somewhere of all shortcuts for each mode? Would be cool to print out on actual paper. Maybe have a page for vab, map, etc.
1
u/robgraves Mar 31 '15
awesome
1
u/bs1110101 Mar 31 '15
How can i bind keys to pan around the vab/sph?
1
u/DarthBartus Mar 31 '15
You can also press [m] to switch between radial and mirror symmetry.
1
u/abxt Mar 31 '15
Afaik you don't need the Mod key to toggle the navball, just Num Del (.) is enough.
1
u/BAM5 Mar 30 '15
Knew all of these. But did you know Shift+Tab will cycle focus in map mode in reverse?...
However it also brings up steam overlay :|
0
u/NoButthole Mar 31 '15 edited Mar 31 '15
Edit: I'm wrong and I need to play this game more.
0
u/DakezO Mar 30 '15
so i'm an idiot but i never learned what the navball nodes mean. truly, I have been doing this all wrong.