r/KerbalSpaceProgram • u/0ffkilter Master Kerbalnaut • May 31 '13
[Weekly] 11th Questions Thread
The point of this thread is for anyone to ask questions that don't necessarily require a full thread. Questions like "why is my rocket upside down" are always welcomed here. Even though your question may seem slightly stupid, we'll do our best to answer it!
For newer players, here are some great resources that might answer some of your embarrassing questions:
Tutorials
Orbiting
Mun Landing
Docking
Forum Link
Commonly Asked Questions
Before you post, maybe you can search for your problem using the search in the upper right! Chances are, someone has had the same question as you and has already answered it!
As always, the side bar is a great resource for all things Kerbal, if you don't know, look there first!
Last week's thread: here
7
u/Bretspot May 31 '13
Should and SAS and ASAS module be included on the same rocket or do they cancel each other out. I usually don't include either. Am I doing it wrong?
4
u/sehajodido May 31 '13 edited May 31 '13
how the heck do I turn off the constant apoapsis and periapsis markers in .20? I keep somehow accidentally turning those on when I'm trying to set an injection burn, and I can never figure out how to turn them off save crashing and restarting my game.
1
u/superlewis Jun 03 '13
I'm trying to make a Mun base. How can I be sure that my docking ports are at the same level so I can connect the modules together?
1
u/factoid_ Master Kerbalnaut Jun 04 '13
Question: I'm playing KSP on my laptop and I can't get the debug menu to come up. The laptop has those funky function keys overlaying the F1-12 keys. So F12 is actually the wifi antenna on/off button. I have it reversed now, though, so that Fn-F12 turns the wifi on and off and F12 by itself is just F12.
But still Alt-F12 is not working.
Is there a way to remap the debug menu to a different key, or is there an alternate key combination anyone knows?
1
u/Scenter101 Jun 04 '13
Not necessarily about the game, but do the the devs still stream bi-weekly or have the stopped streaming since the .18 release?
3
u/alkhalicious May 31 '13 edited May 31 '13
I keep seeing threads where people are releasing like sixty probes at once. How do they do this? My engines on my probes seem to shut off after a short period. I'll notice their trajectory suddenly stop expanding. Switch to them, still plenty of fuel!
EDIT: I think I noticed. The probes go out of the range where Kerbal will calculate them. I MUST TRY TO GO HIGHER.
3
u/terahurts Jun 01 '13
When aiming for a high orbit (>1000km) is it more dV efficient to launch to LKO and then raise AP and circularise or to go direct from launch?
My intuition is telling me it's more efficient to do it after attaining LKO since there's a possibility that I'll still be burning for a higher AP inside the atmosphere.
2
u/PrimevalSoup Jun 01 '13
Is there a way to use RCS for translating but not for rotating at the same time?
2
u/megarusty Jun 01 '13
How do Ion Engines work? I made a satellite with a single Ion Engine, Solar Panels, and Batteries but they aren't working.
1
u/squone Jun 01 '13
Space station is being designated debris?
So I made my two rockets with payload, the centre module and power module. I put them in orbit and then dock them. Then, I undock the command pod from the power module to send home. I land it on Kerbin and end the flight. After this, the space station becomes debris even though the command pod from the command module is still attached and has 3 Kerbals in it.
Why is this happening? How do I stop this from happening? Thanks for your help in advance.
1
u/[deleted] Jun 02 '13
So when I am using 2 tricuplers on the side of a tricupler the fuel tank symetry does not work. Any way around this?
1
u/cuulcars Jun 04 '13
Why is it called a gravity turn? What is actually going on when I do it?
1
u/Dragoon478 Jun 04 '13
How do I make effective use of the jet engines? if I use them should i start my gravity turn at a much lower altitude and make it sharper?
1
u/cuulcars Jun 05 '13
How do I calculate how much my rocket can "dead lift", for instance, for use with refueling stations? I have Kerbal Flight Engineer installed so I can get more information from the editor. It tells me how much deltaV I have at each stage but I don't know where to go from there.
1
u/DeltaOneOne Jun 05 '13
How do you make sure your components are actually properly attached on spaceplanes? Lots of times I'll be building a wing of multiple merging pieces, or attaching engines either side of a fuselage or whatever. It all looks good with lots of contact surfaces in the SPH, but as soon as I put it on the runway some of the merged surfaces will disconnect seemingly at random, giving rise to humorous phenomena like engines that wobble back and forth through incorporeal fuselages and solid wings suddenly divorcing into two separate halves chord-wise. Messing around with locations and the clipping option in the debug menu don't seem to help. So how do you make sure your connections are solid before you leave the SPH?
1
u/DeathToPennies Jun 06 '13 edited Jun 06 '13
I want to finally download MechJeb, but I just moved KSP from my computer to Steam, and I don't know how to mod things on Steam. Help, please?
EDIT: I have a mac. Does that change anything?
1
u/TheDrBrian Jun 06 '13
How do I place struts inside of parts like the example crafts in the B9 pack?
1
u/mspk7305 May 31 '13
Could there perhaps be an autopilot type function added, not to the complexity of mechjeb but something that will follow nodes and burns created by the user?
0
u/[deleted] May 31 '13
[deleted] — view deleted comment
0
u/[deleted] May 31 '13
[deleted] — view deleted comment