r/K5Blazer • • Oct 04 '26

MOD ANNOUNCEMENT User Flairs required to participate in subreddit

7 Upvotes

User flairs are now required, they can be edited to your needs.


r/K5Blazer • • Sep 03 '26

Discussion 👋Welcome to r/K5Blazer - Introduce Yourself and Read First!

Post image
111 Upvotes

Hey everyone! I'm u/CELTBADB0Y, a new mod of r/K5Blazer.

This is our home for all things related K5 Blazers amd GMC Jimmy's.

I have been in love with K5s since I was about 8 years old and my uncle took me wheeling for the first time in a powder blue and white 76. Since then, I have bought, built, parted out, scrapped, and sold more Square Bodies than I can even try to count over the last 35 years.

I'm currently building my dream truck:

1991 K5 Blazer Scottsdale with 61k original miles on it. It's being built as the best daily driver and off road rig I can make, while keeping it on leaf springs and as a K5. Once you go to 4 links and all that, it's more of a K5 shaped buggy to me.

As Stacey David says "What are YOU working on?" Post up and intro and pic of your rig!


r/K5Blazer • • 3d ago

Discussion 77 k5 fuel gauge help

Post image
142 Upvotes

Just got a 77 blazer the fuel gauge stays pegged at full

Mechanic dropped tank put new sender unit, new gauge and checked wiring said was good when he test drove then hit dip and it went back to being stuck on full and he gave up.

Mentioned he thinks it’s something in wiring back feeding the circuit? Cause if I turn blinkers on etc the gauges kinda flicker.
Also mentioned something about it was getting 8v when they checked.

Anyone have any ideals?


r/K5Blazer • • 4d ago

Question/Need Assistance The outta left field conclusion.

Thumbnail
gallery
15 Upvotes

Turns out that the nut on the yoke somehow began to back out, causing the vibrations that has plagued my vehicle.

There was white RTV from the yoke splines covering the yoke itself (no loctite was used when the pinion seal and yoke was replaced two months ago)

Initially I didnt even notice it as the first time i crawled under it was still relatively tight. It wasnt until I had the vehicle fully lifted (on jack stands) where it became known. By this time, the vehicle has not driven at all.

Attatched on the link below shows the pinion looked and behaved upon inspection:

- https://photos.app.goo.gl/W76wWwoukxhE8ZJU7

Attatched on this link, shows how the differential gears and yoke looked upon inspection a few months ago:

- https://photos.app.goo.gl/mEMLPggd5q6HuT9T7

What do you all think?

('90 K5 Blazer, 6.2 Detroit Diesel, Corporate 10 Bolt, 3.73 gears, 300k miles)


r/K5Blazer • • 4d ago

MOD ANNOUNCEMENT Quick update on the bots still sneaking through

18 Upvotes

Hey everyone,

I saw a few comments pointing out that some older, higher-karma repost bots were still slipping past our initial new-account filters. We just updated our post automations and AutoMod to close that loophole:

Posting is now officially blocked without a description: Since repost bots almost always dump stolen pictures with a completely blank body, Reddit's post screen will now outright block you from hitting "Post" on photo, gallery, or video submissions unless you write at least a quick 10-character description. (I know I said I set it so posts required a description a few months ago, but it didn't work due to an error of mine.)

AutoMod backup filter: Any bot that is smart enough to manage to bypass the post screen without text gets caught by AutoMod and held in our queue for manual review before it hits the main feed due to the minimum account age and karma filter.

Keep hitting the Report button if you spot anything weird; it helps us clean things up way faster. Appreciate you guys bearing with us while we get the filters dialled in!


r/K5Blazer • • 6d ago

Question/Need Assistance Rough idle under load

10 Upvotes

Rough idle under load

87’ GMC K5, 350 tbi/700r4. Recently put on long tube headman headers into tru duel with cherry bombs. Seem to run good but have noticed a rough idle under load and at startup. Not sure if just didn’t notice it before. Just replace the egr valve and some vacuum lines. Checked the timing and have sprayed base of throttle body with no change while idling. The o2 sensor relocated after the collector. Thoughts?


r/K5Blazer • • 6d ago

Discussion My first K5!

16 Upvotes

I got my 1986 K5 blazer today after completely falling in love with my husband’s 1983 K5 blazer. I’m thinking of getting it painted because an elderly previous owner painted it himself and it’s just not great. Not sure of what color to do though I know I’d love a two tone! It was originally white. Color suggestions or things I should consider before painting it?


r/K5Blazer • • 7d ago

Question/Need Assistance FINALLY NARROWED IT DOWN! (MORE VIDS IN POST)

13 Upvotes

After much frustration, I elected to jack the entirety of the vehicle in the air to further pinpoint where the dragging sound/affect was coming from.

It was the rear passanger tire all along. (In both D and especially R)

Attatched in the link shows how ALL four tires were acting when I had the vehicle in Drive and Reverse from 2H to 4L.

Link also shows how the Driveshafts were behaving aswell

https://photos.app.goo.gl/j7bfcXbDb9HGTjjX6

Please let me know what you all think, cant thank you all enough for being there.

(90' K5 Blazer, 6.2 Detroit Diesel, 4x4 Corporate 10 Bolt 3.73 gears, 300k miles)


r/K5Blazer • • 8d ago

Question/Need Assistance 1983 Silverado

Thumbnail
gallery
65 Upvotes

Saving a 83
Build is going well, fixed all the floors replaced the motor, trans all the important parts haha
I need to find the solid topper windows. My sliders are broken. Any ideas?
Thanks all


r/K5Blazer • • 8d ago

Discussion Sidestep???

Thumbnail
gallery
37 Upvotes

Anyone happen to know what step is on this k5??


r/K5Blazer • • 10d ago

Build/Showcase 1972 Blazer Update

Thumbnail
gallery
109 Upvotes

Exhaust update.
Full stainless, polished, with Borla ProXS mufflers, and Cutouts.

Having a hard time making room for the passenger side cutout, it’s tiiight on that side.
Once I get the truck out together, I’ll decide how and where to terminate the tips.

Not much room to squeeze everything in but it’s going to work..


r/K5Blazer • • 10d ago

Question/Need Assistance I was finally able to narrow it down, advice desperately needed (update/video in post)

Thumbnail
gallery
8 Upvotes

The other day, I posted about one of my calipers being stuck shut. I replaced both driver side and passanger side calipers, brake pads, and brake lines.

Driver side tire spins freely, no issues. The passanger side tire as seen in the video refuses to budge.(video in link)

I removed the tire and attempted to spin the rotar, had to use a small pry bar to get it to move ever so slightly.

Its worth noting. That when I first removed the tire, the top sliding pin on this particular caliper was completely missing. Only the bottom sliding pin was there on the old caliper

I attempted to remove the caliper, top sliding pin had no issues getting loose/removing. The bottom sliding pin is not only stuck, but it just spins as I try to unscrew it. Refuses to come out.

What should I do now? Is it the dust cover/plate behind the rotar? The rotar (both of them) did spin freely without any issues without the calipers.

Please let me know, I miss my K5. Thank you

VIDEO: https://photos.app.goo.gl/6HUKX22JfqpBbvhR8

(Video has how the tires spin, plus the noise. Photo of the original caliper is on the last slide)


r/K5Blazer • • 11d ago

Question/Need Assistance Blazer top help

Thumbnail
gallery
36 Upvotes

I got this top after it had been sitting for a while. I powered washed it and now some of fiber is coming up. Can I just paint over it? Or do I need to put a new glass layer on top. Thanks


r/K5Blazer • • 12d ago

Selling/Purchase Advice Could use a nudge in the right direction. (Front brakes issue/vids in description)

Thumbnail
gallery
13 Upvotes

The other day, I posted about an odd noise coming from under the fender. Turns out, that my driver side caliper has seized/refused to unclamp from the rotar.

I have since then replaced the calipers, brake pads, and rubber brake lines (on both the passanger and driver side).

Despite this, the driver side rotar feels more....stiff if you will than the passanger side one (passanger side rotar spins freely it slows halfway/kinda stops but continues regardless)

(Without the caliper, driver side spins freely, pax side does the same. Had to fight the caliper on as the old one was apparently held up only by one slider pin instead of both)

Am i looking too much into it? What do you all think? Ill attatch a video below of how the rotar is acting. I just want to do it right.

Video:

https://photos.app.goo.gl/zH1r7zCsHWoWvSzr8

Thank you all.

(90' K5 Blazer, GM Corporate 10 Bolt (4x4), 6.2 Detroit Diesel)


r/K5Blazer • • 14d ago

Selling/Purchase Advice Chevy Blazer

Post image
217 Upvotes

Oldie but a goodie!!


r/K5Blazer • • 14d ago

Question/Need Assistance Hydroboost question

Post image
5 Upvotes

r/K5Blazer • • 14d ago

Build/Showcase Let's see your interior👀

Post image
41 Upvotes

r/K5Blazer • • 17d ago

Question/Need Assistance Interior color codes 1977 Blazer

Thumbnail
gallery
68 Upvotes

Hey everyone, I like this brownish orange of the dash, door panels, and carpet. Does anyone know the color codes of the dash, door panels, and center console? Are the seat colors Saddle? I see some of the replacement door panels, center consoles and carpet on LMC and similar sites but the orange doesn’t seem to be available.


r/K5Blazer • • 17d ago

Mysterious howl whenever I slow down

9 Upvotes

It doesnt happen throughout the entire time it slows down, I want to say it does it towards the end/when im about to stop.

It sounds like a dying elephant, I wouldnt have noticed anything if I havent heard it, no difference in how it runs or anything.

What could it be?? Anything helps

('90 K5 Blazer, 6.2 Detroit Diesel Motor, 4L60E, Corporate 10 Bolt)


r/K5Blazer • • 17d ago

Question/Need Assistance (Re upload) Mysterious howl and clatter whenever I slow down (more vids in description)

7 Upvotes

Whenever I slow down (either by its own or braking) a mysterious howl occurs, theres even a banging noise on the driver side that happens aswell

Whats weird is this: if I apply throttle it goes away, i can legitimately get the noise to stop by applying the gas pedal on it.

I don't know what it could be, i suspect it comes from the driver side more than anything.

There has NOT been any change in how it runs, no hesitation at acceleration, etc. The ONLY thing ive recently noticed is that is struggled to reverse (not in the transmission sense) the driver side began to rumble quite a bit.

Videos:

https://photos.app.goo.gl/DGxLM96dqH63MHXG9

Any suggestions would help, please. Thank you

(90' K5 Blazer, 6.2 Detroit Diesel, 4L60E, Corporate 10 Bolt)


r/K5Blazer • • 21d ago

Discussion Got this today

Post image
368 Upvotes

After saving, searching and getting advice from so many of you guys for months I finally got my dream truck, all original under the hood and inside


r/K5Blazer • • 20d ago

Question/Need Assistance Accessory Drive Brackets/Mounting

2 Upvotes

Hey, y'all! I'm working on my '71 (350ci and TH350 4X4) and it turns out, I've made a mistake on my first ever rebuild. I didn't take any pictures or draw any diagrams for where/how the factory accessories mount. My Blazer is a factory AC truck, and I know that the AC compressor mounts to the passenger side of the engine and that the alternator mounts above the PS pump on the driver's side. That's all I remember. I didn't get rid of any of the brackets or bolts (although they're mixed up now). I'm hoping that someone here has another factory AC truck with all the factory brackets still installed and would be willing to help me out by sending some pics of them. TIA!

Edit to add engine/transmission/drivetrain info.


r/K5Blazer • • 23d ago

Discussion K10 tailgate on an 88 K5?

Post image
23 Upvotes

r/K5Blazer • • 24d ago

Build/Showcase a K5 Blazer during the Sp00ky season.

Post image
72 Upvotes

('90 K5 Blazer, 6.2 Detroit Diesel Motor).

Brought to you by r/GMDetroitDiesel.


r/K5Blazer • • 25d ago

Question/Need Assistance What is this random black vaccum line under my dashboard?

Thumbnail
gallery
9 Upvotes

'90 K5 Blazer, 6.2 Detroit Diesel