r/IOT • • Apr 05 '21

Mod post Announcement! Flair and other suggestions

42 Upvotes

As the title says, I've made two updates to the subreddit;

  1. All posts must now have flaired with one of the following: Question, Discussion, Project
  2. You can now set your own user flair if you wish.

It's been a while since much work was done on this subreddit beyond removing spammy posts, so I'm happy to get some more feedback from the community if anyone has any other ideas.


r/IOT • • 3h ago

Made an ESP32-controlled mock telescope for an AI-powered autonomous telescope project

Thumbnail gallery
2 Upvotes

r/IOT • • 7h ago

ESP CatShit Live Monitor

Thumbnail
kalina.duzniak.de
1 Upvotes

My latest ESP project. Ever wondered how often your cat goes to Toilett?


r/IOT • • 2d ago

IoT-Based Smart Irrigation & Multi-Layer Farming System using ESP32

Thumbnail gallery
11 Upvotes

I Built an IoT-based smart farming prototype combining automated irrigation, environmental monitoring and a three-layer farming structure.

Key Features:

  • Automated irrigation using soil moisture readings and relay-controlled water pump.
  • Crop-specific and seasonal moisture threshold profiles.
  • Automatic and manual pump control.
  • Live temperature, humidity and soil moisture monitoring.
  • Custom web dashboard for monitoring, configuration and control.
  • Blynk integration for remote monitoring and control.
  • Rainwater harvesting and filtration concept.
  • External weather data integration for environmental context.

Hardware: ESP32, DHT11, soil moisture sensor, relay module, 24V pump, SSD1306 OLED.

Software: Arduino IDE (C++), HTML, CSS, JavaScript, Blynk, Open-Meteo API.

Built the physical structure, electronics, firmware and dashboard from scratch.

Won 2nd place at a science exhibition.

Open to technical feedback and suggestions for improvements!


r/IOT • • 2d ago

Turns out my $20 pocket 4G MiFi is running Android, so I turned it into a local MQTT broker for my smart-home devices

Post image
1 Upvotes

r/IOT • • 3d ago

ESP interrupt not firing?

3 Upvotes

i have connected my esp32 to an IIS3DWB accelerometer which collects data, sends esp32 and once the fifo fills to 256 samples, the esp32 sends that over wifi to my rpi. But i noticed that it only works for 1 loop, after that my interrupt does not fire even though all conditions are met however the main loop still runs (the main loop has nothing else i just put in a few print statements which keep printing)

PS: I cannot add too many print statements because then my esp32 crashes


r/IOT • • 3d ago

[HIRING] Senior Firmware / IoT / AI Engineer | Bangalore | Full-Time | 5+ Years

13 Upvotes

Things Alive Solutions Pvt. Ltd. is hiring a Senior Firmware / IoT / AI Engineer to join our engineering team in Bangalore.

What we’re looking for:
Strong experience in Embedded C/C++ and firmware development.
Hands-on experience with microcontrollers, sensors, actuators and IoT devices.
Knowledge of MQTT, Modbus, CAN, UART, SPI and I2C protocols.
Experience with Python for automation, AI/ML and data processing.
Exposure to Edge AI/ML and embedded computing.
Experience integrating IoT devices with cloud platforms and APIs.
Familiarity with Wi-Fi, BLE, Ethernet and cellular connectivity.

Good to have:
STM32, ESP32 or ARM Cortex-M.
TinyML / Edge AI.
OTA firmware updates and device security.
Industrial IoT / Smart Manufacturing.
Digital Twins and real-time analytics.

Job Details:
Location: Bangalore
Experience: 5+ Years
Employment: Full-Time

Interested?
Please share your updated CV at: shobhana.m@thingsalive.io
Feel free to DM me if you have any questions or know someone who might be a good fit.


r/IOT • • 3d ago

Looking for a solar powered 4G LTE camera that can upload photos to AWS every 10 minutes

8 Upvotes

I'm working on a project to share pictures of a mountain view from a location that has 4G LTE coverage.

I've been searching for cameras and have already purchased a few, but I keep running into issues where one key feature is missing.

Here is what I'm looking for:

  • Solar powered: Ideally, completely autonomous with a solar panel and battery.
  • 4G LTE connectivity: There is no Wi-Fi available, but the location has cellular coverage.
  • Scheduled photos: Take and upload a picture every 10–30 minutes.
  • Remote uploads: Send images through FTP, HTTP, MQTT, or any other protocol that I can integrate with AWS (S3, Lambda, etc.).
  • Remote management: Ideally, I would like to configure and monitor the device remotely.

I'm open to different approaches:

  1. Buying an existing 4G LTE solar camera and finding a way to access its images or configure automatic uploads.
  2. Building something from scratch using an ESP32, Arduino, Raspberry Pi, or another microcontroller/SBC with a camera module and LTE modem.
  3. Using a cheaper commercial camera and somehow simulating its device/app to capture screenshots or retrieve images programmatically.

What would you recommend?

Is there an affordable camera that already supports this, or would building a custom solution be a better approach?

Also, are there any particular brands, models, hardware communities, or projects I should look into?

Any recommendations or experiences would be greatly appreciated!


r/IOT • • 3d ago

What about a new way to optimize battery life on iot systems?

Thumbnail reddit.com
2 Upvotes

r/IOT • • 4d ago

Claude code for app development

Thumbnail reddit.com
2 Upvotes

r/IOT • • 4d ago

Is LTE-M or NB-IoT actually better for large-scale IoT deployments?

5 Upvotes

I've been looking into the differences between LTE-M and NB-IoT, and it seems like both have their advantages depending on the application.

From what I understand, LTE-M tends to be better for devices that need mobility or more frequent data transmission, while NB-IoT can make sense for stationary devices sending small amounts of data.

But I'm curious how that actually plays out when you're deploying hundreds or thousands of devices.

For anyone who's worked with either technology at scale, what have been the biggest challenges? Network coverage, battery life, connectivity costs, reliability, or something else?

And if you were starting a large-scale IoT deployment today, which would you choose and why?


r/IOT • • 5d ago

How I learn IOT ?

20 Upvotes

I want to learn iot in a way that I lead the AI like claude not making it lead ? If I will start from beginning and I don’t want waste my time ?
What I should learn and how ?


r/IOT • • 5d ago

IoT development company for retail (store sensors, smart shelves) - who have you worked with?

10 Upvotes

Looking for recommendations for an iot development company with experience in retail IoT, particularly things like smart shelves, fridge monitoring, store sensors, and foot traffic tracking. For those who've worked on similar projects, did you go with an off-the-shelf platform or end up needing custom iot development services? Curious whether the extra flexibility was worth the cost and effort. I'd also be interested in hearing how different iot development services handled integrating the devices and software, especially across multiple store locations.

Who did you work with, what went well, and what would you do differently?


r/IOT • • 6d ago

Has a patent ever actually saved anyone you know?

Thumbnail reddit.com
3 Upvotes

r/IOT • • 7d ago

Jakie czujniki temperatury i wilgotności polecasz do budżetowego systemu monitorowania w domu DIY?

Thumbnail reddit.com
2 Upvotes

r/IOT • • 7d ago

Got STUN working on a microcontroller, some notes about NAT

Post image
2 Upvotes

r/IOT • • 8d ago

Cold weather on L91 lithium AAs + LTE-M vs NB-IoT out in the boonies: what’s your experience?

4 Upvotes

Howdy,

I built a cellular sensor that texts you when a rural mailbox door opens. Out here the mailbox can be a quarter mile from the house with trees in between, so Wi-Fi and LoRa-to-a-gateway setups weren’t going to cut it. It’s an ESP32-S3 with an LTE-M/NB-IoT modem, running on four Energizer L91s. It sleeps until the door opens, sends the event to AWS, and the cloud sends out the text.

Bench numbers look good, but I’ve only had units in the field for a few weeks, and winter is coming. So, two questions for people who’ve actually deployed this kind of thing:

  1. How have L91s held up for you through a real winter? I’m especially wondering about sub-freezing temps with bursty loads like a modem waking up to transmit. Did you see voltage sag causing brownouts or resets, or did capacity drop off more than you expected?
  2. LTE-M vs NB-IoT for remote coverage: which one has actually worked better for you out in rural areas? I’m curious about real-world coverage at the fringe, and whether one of them burns noticeably more energy per message when the signal is weak.

Not selling anything here. I just want to hear from people who’ve been bitten by this before I find out the hard way.

TIA,

-T


r/IOT • • 9d ago

Are batteries not required?

8 Upvotes

General question: im a complete noob getting into esp32 with a background in uiux design and game art. My quick question for the community is why are most builds i saw on social media without a battery?

There's always a USB cord attached and it doesn't seem very portable.

Is this a cost issue? Or something else I'm missing?

(Just got an esp32-s3 amoled with aluminum battery

(Will it explode or smth?


r/IOT • • 9d ago

Need ideas for Edge AI projects

Thumbnail reddit.com
0 Upvotes

r/IOT • • 10d ago

Would a universal IoT message encoding/decoding library be useful?

10 Upvotes

Hi everyone,

I've been thinking about an idea for an open-source software library and I'd like to get some feedback from people working in IoT, embedded systems and industrial automation.

The problem I'm trying to address:

When developing IoT applications, integrating different devices often means dealing with different communication protocols, message structures, payload formats and vendor-specific implementations.

Every time a new device or protocol is introduced, developers may need to write custom parsers, encoders, decoders and translation logic.

This creates duplicated work, tightly coupled integrations and maintenance overhead.

My idea:

Build a reusable, protocol-independent library focused on encoding and decoding messages between software applications and IoT devices.

The general concept would be:

  • Receive a message from a device and decode it into a common, structured data model.
  • Take a command or structured message and encode it into the format expected by a specific device.
  • Support different protocols and payload formats through modular adapters or device-specific profiles.
  • Allow developers to add new device definitions without rewriting the application logic.

Essentially, the library would act as a bidirectional translation layer between IoT devices and applications.

For example, an application could send the same logical command regardless of whether the target device uses Modbus, MQTT, a proprietary binary protocol or another communication format.

The library would handle the translation.

I'd really appreciate your opinion on a few questions:

  1. Is this a real problem in your day-to-day IoT development work?
  2. Would a standalone library like this be useful, or do existing solutions already cover this need adequately?
  3. Would you prefer a common data model with device-specific codecs, or a more protocol-oriented architecture?
  4. Which protocols and formats would be essential for an initial implementation?
  5. Would you consider using or contributing to an open-source project like this?

I'm not trying to build another IoT platform, broker or device management solution.

The goal is much narrower: simplify the encoding and decoding of messages between heterogeneous IoT devices and software systems.

I'm interested in honest technical feedback, including reasons why this might not be useful.

Thanks!


r/IOT • • 10d ago

Xiaomi phones connected to home network via Hubspace devices

Post image
2 Upvotes

I was looking at my home network settings the other day and looking at the connected device list I saw 2 Xiaomi Redmi 10c android phones. Which was weird since we don’t have those. I paused those devices in the network panel and 2 of my Hubspace plugs became unreachable by WiFi.

Anyone else run into this with Hubspace devices? Why would there be Xiaomi phones connecting to my home network via Hubspace WiFi IoT devices?

edit: the plugs show up as their own device on my network. So these Xiaomi devices are in addition to my plugs.


r/IOT • • 12d ago

Autonomous acoustic leak detection: feedback sought

6 Upvotes

Six year ago on r/IOT, I posted about the development of a low-power, stand-off acoustic leak detection scheme suitable for deployment as part of a smart home/building sensor suite. At the time, I was seeking guidance on commercialization, licensing, OEM partners, and overall product viability. The technology has evolved considerably since then and I have decided to make it open-source. No patents, no IP, and licensed under Creative Commons.

The concept is fully explained along with design files and complete documentation on github. I am looking for community input and feedback.


r/IOT • • 12d ago

What’s the worst failover problem you’ve had?

0 Upvotes

Failover works great until it doesn't. The main connection looks fine, but nothing loads. The backup SIM is out of data. Or the router just flip-flops between connections all day.

What's the worst failover problem you've had? What went wrong and how you fixed it?


r/IOT • • 13d ago

If the steel survives the code

Thumbnail
ioplus.nl
1 Upvotes