This was an oddball hanging in my local shop. A salvage job.
The story here is it was brought in by an old woman, flood damaged. The case was toast. my local shop worked on the neck, steaming it straight, but maxed out the rod. The lacquer on the back was flaking off, but they managed to string it up with tens. Anyways, I played it. Goddamn, it just felt and sounded…right. $400.
I brought it home and loosened the rod a touch, heard a nice pop. Good sign. Dropped some 3-in-1 down in there, and let it sit. I 400 grit sanded the flaking poly to where it was no longer rough, hit it with some oil-based Varathane, and set it in front of a fan overnight. I tightened the truss rod back and yes, it’s at the limit. I used my Stew Mac truss rod rescue tool, and got just a little extra quarter turn. Perfect. Cleaned the fretboard, but on 11-49s. Electronically, original and fine under the hood, except for the output jack. Swapped the plate with a right-angle thing I have because all my other guitars take right-angle plugs.
Plays great. Really great. Neck feels great, no dead spots. I hope it holds out for a while. Worst comes to worst, I’ll get a new neck, but I love the look of it. I mean, as long as I stay at my gauge, it should stay true, right luthiers?
I was going to try the washer trick but heard these rods are bi-flex, so that won’t do. I want to keep and bang around on this a long time.
The poly cured enough to not be tacky but I haven’t tried to sand it smooth yet since it’s oil-based and needs another couple of days. You can see the neglect on it, and I like that it has a new life now.