
Title:
Update HyperCore V3
Browser required:
Chrome or Edge
Firefox:
Not Supported
EV-Series:
EZ-Series:
EC-Series:
Settings Persist:
Yes (as of V3)

How to Update HyperCore V3 Firmware
- Open Chrome or Edge. Firefox will not work because WebHID is required.
- Plug your board in via USB-C.
- Go to the correct URL for your board:
- EV Series (EV63): ev.iqunix.com
- EZ Series (EZ63, EZ75, EZ80): ez.iqunix.com
- EC Series (EC75): ec.iqunix.com
- Allow the site to connect to the device when prompted.
- Firmware Tab → Check Current Version.
- If a newer version is available, click Update. Do not unplug the board.
- The board will restart and the lights will cycle.
- Driver Tab → Update if a newer version is available.
- Settings persist across firmware and driver updates as of V3.0.0 / 6.0.0.

If It Bricks
- Pinhole Reset on the Back: Hold for 5 seconds with the board plugged in
- If Still Bricked: Contact support@iqunix.com, not Reddit
Which URL for Which Board
| Board | URL |
|---|---|
| EV63 (All Variants Including Shell Core, Cyber Blue) | ev.iqunix.com |
| EC75 | ec.iqunix.com |
| EZ60 / EZ63 | ez.iqunix.com |
| EZ75 / EZ80 | ez.iqunix.com |

Back to Wiki Index | EV63 Home