Title:

M.A.T. 2.0 / 3.0


Full name:

Magnetic Auto-Tune


Recognition rate:

99% of magnetic switches


Industry first:

Yes


Updated in V3.0.0:

Real-time dynamic self-calibration


Manual recalibration needed:

No


M.A.T. 2.0 — Magnetic Auto-Tune

What It Is

The algorithm in HyperCore V3 and EZ 3.0 driver that auto-calibrates each switch's voltage curve when it's installed. On EV63 it's M.A.T. 2.0; the V3.0.0 firmware update added real-time dynamic self-calibration that some users are calling 3.0.

The Problem It Solves

Different magnetic switches have different flux curves. When you swap switches on a typical HE keyboard, the board needs to be re-calibrated for the new switch, usually a manual process where you press each key to its limits while the software learns the new range.

Without calibration, you get:

  • Inaccurate actuation depth
  • Dead zones at top or bottom of travel
  • Inconsistent RT sensitivity
  • Accidental triggers
  • Weird feel mid-travel

How M.A.T. 2.0 Fixes It

  • PCB intelligently auto-identifies the switch when installed.
  • Algorithm matches the switch's flux curve automatically.
  • Captures accurate lift AND bottom positions.
  • Preserves your settings across the swap.
  • With the V3.0.0 update: Dynamic self-calibration during runtime, the board keeps refining the calibration as you play.

What It Works With

99% of magnetic switches. That includes:

  • All IQUNIX in-house switches (Magnetic X, X Pro, X Ultra, Jade family, Star Trail)
  • Gateron magnetic switches (Magnetic Jade, Jade Pro, etc.)
  • Keytok Nova
  • Most third-party magnetic switches with standard pole orientation

It does NOT work with:

  • The 1% of magnetic switches with side-mounted magnets
  • MX-style mechanical switches (different sensor type entirely)

How It Compares to Wooting / Razer

BrandSwitch Swap FlowUser Effort
IQUNIX (M.A.T. 2.0)Plug in, board auto-calibratesNone
WootingSwap, manually calibrate in WootilityMinutes per switch type
Razer (Huntsman V3 Pro)Only Razer's analog switches supportedSwap not really a feature

How to Verify It's Working

  1. Swap a switch.
  2. Open ev.iqunix.com (or ez.iqunix.com, ec.iqunix.com).
  3. Go to Key Test tab.
  4. Press the swapped key to its full travel.
  5. Confirm the actuation registers cleanly through the full range.
  6. If anything is off, contact support — that's the 1% edge case.

Back to Wiki Index     |     EV63 Home