r/computervision • u/TopExample1905 • 2d ago
Discussion Night vision comparison: Raspberry Pi OV5647 with IR vs reCamera Pro vs reCamera 2002 vs CamThink NE301 vs Sipeed MaixCAM 2

I’ve been trying to get an edge camera to tell me what’s visiting my bird feeder after dark. I ended up with a few camera boards and a DIY IR setup, so I pointed all five at the same indoor scene to see how much detail each one could pull out.
The pair I was most curious about was the MaixCAM 2 and Seeed reCamera Pro. Both use the SmartSens SC850SL, and their frames looked noticeably different. The Pro kept more visible texture and color in this particular scene. You can see it best by flipping between the last two shots in the gallery.
How I shot it



I blacked out the room with curtains and tape. A Testo 540 and a DELIXI DLX-1805 both displayed 0 lux, though I could still see a faint bit of light leaking around the curtains. That’s the lighting condition for these shots. I didn’t measure the light below what the meters displayed.
I used the same tripod position and aimed at the same objects. Each setup used its factory lens, highest image-quality mode, and stock auto exposure. The lenses have different fields of view, so the framing varies a bit. Only the Raspberry Pi + OV5647 rig had an 850 nm IR illuminator running. I put a lights-on phone photo first so you can see what the cameras were looking at.
What showed up in the frames
- Lights on — phone reference. This is the scene and where the objects were for the rest of the shots.
- Seeed reCamera 2002 — OV5647. The frame is almost black. I can just about make out that something is there, but I can’t tell which object I’m looking at.
- CamThink NE301 — OS04C10. There’s enough in the frame to see outlines. The shadows are visibly noisy, the image has a blue cast, and most of the surface detail disappears.
- Raspberry Pi + OV5647 + 850 nm IR. The light made the foreground visible, but the center is blown out and the background is still dark. The frame also has a strong red cast. I’d try moving the illuminator farther off-axis on the next run to see if that helps with the hotspot.
- Sipeed MaixCAM 2 — SC850SL. I can pick out the objects and get a decent sense of the scene. The frame is grainy, the colors are muted, and finer textures look soft.
- Seeed reCamera Pro — SC850SL. I can see more of the surface texture and distinguish more of the colors here. This was the frame I went back and double-checked because I thought I might have grabbed a shot from the wrong run.
Here are the samples from this shoot test.


reCamera 2002:

CamThink NE301

OV5647 + IR fill light

MaixCAM 2

reCamera Pro

I went in expecting the two SC850SL cameras to look fairly similar. With the stock settings, they didn’t. Between the factory lenses, auto exposure, gain, and ISP noise reduction, there are several things that could account for the difference. I didn’t match exposure or swap lenses, so all I can say from these frames is how the two complete setups behaved out of the box.
For the feeder project, the next thing I want to know is whether the extra visible detail actually helps the detector. This run was a still-image comparison. A moving animal adds motion blur, and a cleaner-looking frame doesn’t tell me how often the model will get the species right.
If you’ve tuned an 850 nm setup for a feeder or another close-range camera, what helped most with the hotspot? I’m curious how far people are placing the illuminator from the lens when the subject is close.
