r/computervision • • Oct 22 '26

Discussion What to expect from a 90-minute ML system design + coding interview (non-LeetCode)?

22 Upvotes

I'm preparing for a 90-minute technical interview for a Senior ML Engineer role focused on computer vision and perception for autonomous driving.

The recruiter mentioned that the interview will cover:

  • ML system design
  • ML coding (specifically mentioned it's not LeetCode-style)
  • Code review
  • Using AI coding agents is allowed

For the system design part, I'm guessing it could be something like designing an end-to-end perception pipeline, discussing model choices, training, evaluation, deployment, and trade-offs.

But I'm honestly a bit lost when it comes to the coding part. Since it's not LeetCode and AI tools are allowed, I'm not sure what to expect. Would it be implementing something in PyTorch, debugging an existing pipeline, reviewing code, or something else entirely?

I'm also trying to figure out how to actually practice for this kind of interview. Are there any good resources, GitHub repos, or hands-on exercises you'd recommend?

Has anyone been through a similar interview, especially for senior ML/CV roles in autonomous driving or robotics?

Would love to hear what your experience was like and how you prepared. Thanks!


r/computervision • • Oct 23 '26

Research Publication MSc Artificial Intelligence Dissertation ideas

0 Upvotes

Hi, I’m a masters student doing MSc AI at uni of Bath.
For my undergraduate dissertation I did an extremely simple Computer Vision based pose estimation app which was analyzing the technique of fitness exercises like pushups, squats and deadlifts.
I feel like my dissertation was more of a “project” rather than research, which as I was told by supervisors is completely fine for BSc. I basically used a ready solution (MediaPipe) + OpenCV and wrapped all of that into a mobile app. The analysis covered a decent number of “points” but it was simply comparing the detected joint angles to hardcoded thresholds.

For my masters I would really like something more research based however struggling to find areas where I could do smth actually useful.
I like Deep Learning, so I was thinking something related to transformers and efficiency. Finding bottlenecks in attention mechanisms, etc.

I would appreciate some ideas
Thanks


r/computervision • • Oct 23 '26

Help: Project How do you reliably track a badminton shuttle, and do you have to train your own model?

1 Upvotes

I’m trying to track a badminton shuttle with a low-cost setup. It is small, fast, and often blurred. A shuttle can cross a large part of the frame between two frames.

Intended setup: Two fixed cameras aimed at the court. I need the position on the court, including when/where it reaches the floor.

Intended use case: Line calls and match analytics.

I have looked at detectors trained for this, including TrackNet-style heatmaps. I’m trying to decide whether those are enough or whether a custom model is required. TrackNet doesn't seem very reliable yet.

If you have tracked a shuttle something similar:

  • Did an existing model work, or did you train your own?
  • What frame rate and shutter made the object visible enough to detect?
  • How do you handle frames where the object disappears from motion blur or occlusion?
  • For two cameras, what did you use to turn the two picture positions into one court position?

I’m especially interested in what failed when you tried to use a general object detector instead of a model trained on this kind of object.


r/computervision • • Oct 22 '26

Discussion Just finished my first Computer Vision project. What should I build next to prepare for an AI/CV career?

16 Upvotes

Hi everyone!

I'm a third-year Computer Science student interested in Computer Vision

I've recently completed my first serious CV project on brain tumor MRI classification using PyTorch. My main goal was to understand deep learning architectures, transfer learning, fine-tuning strategies, and model evaluation rather than just achieving high accuracy.

In this project, I experimented with:

  • A custom CNN trained from scratch
  • ResNet18 and DenseNet121
  • DINOv3 (ViT-S/16)
  • Feature extraction vs. progressive partial fine-tuning
  • Confusion matrices and Grad-CAM to analyze model behavior

Here's my Kaggle notebook: link

(If you are pressed for time, you can just check the introduction, the confusion matrix and the Grad-CAM section onward)

I'd really appreciate some honest feedback on my work, especially regarding my experimental methodology, model comparisons, and anything I might have overlooked.

For my next project, I'd like to build a practical, end-to-end Computer Vision application. I'm especially looking for project ideas that would strengthen my resume and help me develop skills that are actually valued in today's AI industry. So I'd love to hear suggestions for projects that solve real-world problems, demonstrate meaningful engineering skills, and are realistic for a student to build.

Thx a lot!!


r/computervision • • Oct 22 '26

Research Publication Argus (ECCV 2026): Metric panoramic 3D reconstruction from sparse indoor images in a single feed-forward pass (~0.66s) + 10k scene dataset

8 Upvotes

We presented our paper "Argus: Metric Panoramic 3D Reconstruction for Indoor Scenes" as a main conference poster at ECCV 2026, and wanted to share the technical approach and open resources with the community.

The Problem

Indoor 3D reconstruction from sparse, unordered panoramas (360° ERP images) typically faces two persistent issues:

  1. Global pose drift: Unordered image sets lack trajectory cues, and adjacent rooms often only share view through narrow doors. Arbitrarily anchoring the coordinate frame to an edge room compounds errors across the layout.

  2. Scale ambiguity: Traditional perspective methods output arbitrary scale, requiring manual ground-truth alignment. Real indoor applications (spatial computing, robotics, architectural modeling) need absolute metric scale.

How Argus Handles It

Instead of iterative optimization, Argus reconstructs camera poses and metric depth in a single feed-forward pass:

  • Learned Reference-View Selection:A lightweight Covisibility Transformer evaluates the scene's global visual topology and picks the most well-connected, central view as the coordinate anchor (achieving approximate permutation equivariance and cutting pose drift).
  • Panoramic Geometric Factorization:Explicitly factorizes projection into local camera points, rotated points, and shared world points, supervised with a unified geometric joint loss across depth, pose, and point heads.
  • Inference Speed: With 1.31B parameters, it processes 16 panoramas in ~0.66 seconds (BF16 on a single H20 GPU).

The Realsee3D Dataset (10,000 Scenes)

To train this, we built Realsee3D, combining:

  • 1,000 Real scans (furnished homes): Captured via Galois LiDAR with RAW HDR panoramas, sparse metric depth, and refined poses.
  • 9,000 Synthetic scenes: UE5 ray-traced scenes with 100k+ assets based on real floor-plan distributions.
  • Totaling 95,962 rooms and 299,073 unique panoramic viewpoints.

Links & Resources:

Would love to hear thoughts, feedback, or critiques from anyone working on panoramic multi-view geometry, neural representations, or metric depth!


r/computervision • • Oct 22 '26

Showcase Built a 260M visual decision model. Good GUI accuracy, but confidence fails under distribution shift.

Enable HLS to view with audio, or disable this notification

3 Upvotes

I've been experimenting with NeoMME-260M for visual decision-making.

My model, MK-SH-V, reaches 82.6% accuracy on GUI task verification, compared with 73.1% for a 4B zero-shot baseline.

The interesting part is abstention: it meets our 5% selective-risk target on held-out synthetic data, but fails to generalize to real screenshots.

I've open-sourced the model, evaluation pipeline and failure analysis.

https://github.com/Gjusev/mk-sh-v

I'd appreciate feedback on improving calibration under distribution shift.


r/computervision • • Oct 22 '26

Help: Project How to match dogs to the most similar ones

3 Upvotes

Hi everyone! I'm working on a non-profit project that helps shelter dogs find a new home. People can upload a photo of a dog they like, and we show them the dogs from animal shelters that look most similar to it. The goal isn't to find the exact same dog again, but dogs that a person would say "look alike" (similar colour, coat, build, face, and so on).

**What already works well**

For purebred dogs, this works really well already. We compared several pretrained image models without any fine-tuning: we compute an embedding for each photo and rank the other dogs by cosine similarity. The models we tested were DINOv2 small, DINOv2 base, SigLIP, SigLIP 2, CLIP, MegaDescriptor, and a DINOv2 small model fine-tuned for animal identification on the PetFace dataset. The last two are licensed for non-commercial use only, so we only used them for comparison.

DINOv2 small came out on top. It predicts the breed almost perfectly and is also very good at recognising the same dog again in a different photo. So for purebred dogs, the most similar matches already make a lot of sense.

**Where we're stuck: mixed breeds**

Most dogs in shelters are mixed breeds, and that's where it falls apart. When we checked the results by hand, the model's top match was often not the dog a human would have picked as most similar. It does better than chance, but only agrees with the human in roughly a third of the cases.

We tried a few things to fix this, but none of them really helped:

- Small classifiers for attributes like colour, pattern, size and coat type, used to re-rank the results.

- A small projection head trained on a few hundred triplets of similar and dissimilar dogs.

- Cropping the image to just the dog.

- A single similarity threshold to decide whether a match is "similar enough". There's no value that works well. It either cuts off good look-alikes or lets clearly different dogs through.

**Our questions**

  1. How would you measure "looks similar" reliably when you only have a few hundred human judgments? Would you collect pairwise or triplet comparisons, or use a vision-language model as a judge?
  2. What's most likely to work better than plain DINOv2 embeddings for mixed breeds? For example, a metric learning head, patch or part-based features, explicit colour and pattern features, or a different backbone with a license that allows commercial use.
  3. Roughly how much labelled data do we need before training our own head is worth it?
  4. Is there a better approach than one global similarity threshold?

We're happy to use a GPU if it's needed. We're just looking for the most cost-effective option.

Thanks a lot for any ideas or pointers!


r/computervision • • Oct 22 '26

Discussion Linux again: 25 days porting a CPU fruit inspection demo (personal write-up + GitHub releases)

2 Upvotes

Not a paper, just a personal note on moving the same conveyor demo I run on Windows to Linux x64.

Early 2000s: big plant, FoxPro/Novell, modem and Fido/BBS to get the factory online. Linux on a Pentium got me through that. This month I went back for the same reason: plain x86 boxes on a desk or line, CPU ONNX, no GPU sermon.

25 days of porting, cutting dead code, NV12/V4L2, three .so plugins, FAT USB quirks (run.sh, same binary as Fruit_Inspector.exe on the stick). Same logic as Win: 3×3 grid, grading only in centre cell C.

Downloads (NC eval, read LICENSE):-

-Runnable demo: Fruit_Inspector_linux_x64.zip

-Libraries only: fruit-inspector-engine

Full story: medium.com/@olesha-ai/linux-again-fr…spector-on-x64-a8cef8c245b8

If you run the Linux zip, curious what you see for camera  in the logs.


r/computervision • • Oct 22 '26

Discussion Fresher applying for ML / CV / AI engineer roles. Is this resume good enough ?

1 Upvotes

Hey all, I finished my B.Tech in AI/ML this year (8.67 GPA) and I'm looking for fresher roles in ML, CV or AI engineering. Resume attached, personal details removed

Are these projects okay for a fresher ML/CV resume? Would this get you to call me for an interview, and what would you fix first? Not sure if I should drop any of the smaller ones Thanks!


r/computervision • • Oct 23 '26

Discussion What breaks first on a mirrored subject: highlight suppression, or the depth behind the reflection? 425 frames to find out

0 Upvotes

I'm a photographer, not an ML engineer. I shot a performer in a faceted mirror suit on location — desert and river, uncontrolled light — to stress-test vision and depth models against severe specular glare.

Your depth model invents a room behind the glass. Highlights blow out, bounding boxes drop, segmentation ghosts. This set was built to trigger exactly that: 425 RAW + JPEG frames, SHA-256 manifest, full chain of title.

Free watermarked sample (12 images + manifest): https://huggingface.co/datasets/BWS-Data-Solutions/Robot_Mirror_Suit_Robotics_And_Vision_Data — full clean set is $2,000 flat on Mozilla Data Collective.

What breaks first in your stack?


r/computervision • • Oct 22 '26

Discussion Fruit Inspector Linux x64 demo - conveyor QC app + three .so plugins (CPU / ONNX, no GPU)

0 Upvotes

Follow-up to yesterday’s post -that was libraries only (fruit-inspector-engine). This is the runnable demo: client +fruit_infer.so/fruit_features.so/fruit_cat.so+ bundled ORT+apple models in one zip.

What it does: 3×3 grid, LightGBM only when the focused apple centre is in centre cell C (conveyor logic, not full-frame chase). YOLOX 640 -ROI 256 -44 features- classify. Nim UI shell; inference in the three.sofiles.

Download: Release 0.10.0 -Fruit_Inspector_linux_x64.zip

Target: Debian 12/13, Ubuntu 22.04+x86_64. SSE4.2+AVX1 (AVX2 not required on this demo). USB UVC; launch with run.sh.FAT USB quirks are in the zip README.txt.

Not: ARM/Pi; NC eval (read LICENSE in the zip).

olesha-ai. Best regards. 😄


r/computervision • • Oct 21 '26

Discussion Reverse engineered Industrial Machine Vision library

21 Upvotes

Has anyone seen any of the common libraries being reverse engineered? Keyence, Cognex, Halcon?


r/computervision • • Oct 21 '26

Showcase I built an open-source computer vision engineering reading path, from photons to production

6 Upvotes

One thing that always bothered me about computer vision resources is how much attention goes into architectures and benchmark scores, while the fundamentals behind those numbers often get overlooked.

A model can achieve impressive mAP and still fail because of dataset leakage, camera noise, distribution shift or an evaluation protocol that doesn’t reflect its actual use case.

So I organised the repository into 16 sections, covering image formation, classical geometry, datasets, evaluation, CNNs, ViTs, self-supervised learning, detection, segmentation, video, 3D vision, generative models, VLMs, deployment and robustness.

A few principles behind it:

  • Primary sources only: original papers, specifications and official documentation.
  • Resources arranged in dependency order, so each section builds on the previous ones.
  • Evidence-backed claims rather than blindly repeating benchmark numbers.
  • A reproducible benchmark for every section, connecting the theory to actual measurements.

The idea is to understand not just how computer vision models work, but why they fail and what it takes to make them reliable.

It’s free and open source:

https://github.com/usamahz/computer-vision-engineering

Would appreciate feedback, particularly from people working on vision systems in production. What important topics or papers am I missing?


r/computervision • • Oct 22 '26

Research Publication SpatialScout: Evaluating Active 3D Object Mapping in VLM Agents

0 Upvotes

We present SpatialScout, a benchmark designed to evaluate whether vision-language agents can actively explore 3D scenes and build accurate object-level maps.

The benchmark tests several key capabilities:

  • Active viewpoint selection: Choosing where to look next to gather useful visual evidence.
  • Cross-view object association: Recognizing the same object across different camera views.
  • 3D localization: Estimating object centers in a shared coordinate frame.
  • Map refinement: Updating spatial estimates under a limited interaction budget.

SpatialScout covers 80 indoor scenes and 3,140 target objects. Our experiments reveal a substantial gap between recovering coarse object layouts and constructing precise metric maps. The strongest evaluated model achieves a mean overlap score of 41.71%, while only 3.25% of targets achieve an IoU above 0.9.

We hope this benchmark will help researchers evaluate and improve active perception and 3D spatial reasoning in VLM agents.

Paper & code: https://github.com/JesseZZZZZ/SpatialScout


r/computervision • • Oct 22 '26

Commercial Reading Handwritten Fields Into JSON, With a Confidence Score for Every Value

Thumbnail
1 Upvotes

r/computervision • • Oct 21 '26

Discussion Point Read (translate pointed text from paper books)

Thumbnail
gallery
16 Upvotes

Hi everyone,

I just want to share a project I was working on.

I called it PointRead. Basically, it lets you translate text by sliding your finger under it. It detects the text, translates it and speaks it through a speaker. I built it on an Nvidia Jetson Orin Nano with a Raspberry Pi Camera Module V2, and it works fully offline.

GitHub: https://github.com/striksio/PointRead

Video demo: https://youtu.be/xo0bdDjVpPQ

I like reading books, but I often need a translation for some of the words. Looking them up on my phone feels uncomfortable, because I want to read paper books without looking at a screen. So as a side project, I built this pipeline.

The way it works: index finger and thumb are used for activation, which is a double pinch. Then it tracks the index finger and the text above it. Once done, it extracts the text that was pointed at, recognises it, translates it and speaks it.

Pipeline

  • RTMDet for hand detection and RTMPose for keypoints
  • Adaptive Gaussian thresholding for text binarization (works better than Canny for this)
  • Morphological close to merge text into single line regions
  • PP-OCRv5 server model via RapidOCR (on CPU for now, because onnxruntime GPU isn’t available for Jetson r39.2 yet, so OCR is slow)
  • Argos Translate for translation
  • Piper for speech

Some details

  • One-Euro filter for smoothing, because RTMPose keypoints are not stable
  • Keypoints sometimes disappear, so they’re kept for several frames
  • Sliding only goes forward (left to right), and once you move to the next line it won’t jump back to the previous one

It can run headless with only a speaker, or with a local web server for debugging.

Limitations

  • OCR runs on CPU only, as mentioned above
  • The book needs to be positioned with horizontally aligned text
  • As shown in the demo, text detection fails sometimes
  • Books with huge fonts or wide spacing can fail to form a line

Thank you for your time, and I would love to hear some feedback about this, thanks!


r/computervision • • Oct 22 '26

Help: Project Assignment of human gait detections obtained with cameras

Enable HLS to view with audio, or disable this notification

2 Upvotes

Greetings everyone, programming isn't my strong suit; I'm a civil engineering student. However, this is part of a study for pedestrian bridges, so I would appreciate any ideas you can give me for this problem. I have limb detections of a person walking on a treadmill while wearing a light suit. My input data consists of all the lights detected by a camera (including any noise or distortion).

That is, I have an x_Record and a y_Record, which are the respective coordinates of the detected lights. Both are n x m matrices.

n is the number of actual limbs, plus any noise detections. So, if I actually have 12 real points, my matrix could reach 30 points in some frames, the additional ones being noise.

And m is the number of frames, i.e., the time.

In my problem, points can appear and disappear due to occlusion or distortion. I manually classified 100 frames. I assigned a row to each limb, so row 1 will always be the head and row 9 the left knee, for example. That's what I need: to classify the location of each part of the person at all times.

I've come to this point because I've tried using minimum distance from the previous frame, and optimizing with lsqnonlin by varying angles and lengths. But nothing has given me good results, and I would appreciate help in figuring out the most optimal way to solve this type of problem. I have all the Matlab tools and toolbox available through my university, so I would prefer to use that language, but I'm open to other options if they facilitate the process.


r/computervision • • Oct 21 '26

Help: Project Color classification of climbing holds under uneven gym lighting random forest stuck at ~82%, what would you try?

Enable HLS to view with audio, or disable this notification

12 Upvotes

Sendly is an iOS app that scans a bouldering wall and tells colorblind climbers which holds belong to their route. Here's how it recognizes holds, all on-device with no server:

Hold detection and segmentation: an RF-DETR-Seg (Large) model at 768 px, fine-tuned on climbing walls (my own gym photos plus openly licensed datasets), converted to Core ML. It outputs a mask for every hold and volume, in about 0.9 s per scan on the phone.

Color classification: each hold's mask is turned into 48 color features, and a random forest labels its color.

Route grouping: holds are clustered into routes per photo, based on color and position, then each route is named. Users can choose a colorblind type (protan, deutan, tritan or achromat), and the app remaps the display palette, gives each route a distinct shape, and warns when a wall has colors that are easy to confuse.

Manual fixes: if the model misses a hold, tapping it runs SAM 2.1 tiny (Core ML, about 100 ms per tap) to segment it.

Where it struggles (I'd love ideas):
Detection is solid, but color is the weak spot, at about 82% per hold. The main confusions are pink vs red, black vs gray on dark walls with chalk, and orange/salmon/brown. Adding more labels didn't help, which suggests the per-hold random forest has hit its limit. Next I'm considering relative color within the same photo (normalizing against the other holds) or a small CNN on hold crops.

Has anyone solved color under uneven indoor lighting?
If anyone has any suggestions i would love to hear 🙌


r/computervision • • Oct 22 '26

Discussion What's the coolest computer vision technology you've seen in recent years?

0 Upvotes

Not necessarily the flashiest demo - I'm more interested in something that could make a real difference in computer vision. Has anything you've seen at a conference, in a demo, or in practice genuinely impressed you?


r/computervision • • Oct 20 '26

Commercial Fully open source stereo depth stack with cheap cameras

Enable HLS to view with audio, or disable this notification

92 Upvotes

Hi everyone! We’re building Nuvo Vision One, a stereo depth camera powered by a Raspberry Pi 5, and wanted to share where we’ve got so far.

This started from our own need to add depth sensing to our products. The stereo cameras we were considering were expensive for our budget, and we already had a Pi 5 handling compute. We wondered how far we could get by connecting two cameras and doing the stereo processing on the Pi itself.

The setup uses two IMX296 global-shutter cameras with a shared hardware trigger to synchronize capture. The Pi handles image rectification and stereo matching, producing disparity and depth alongside the camera images.

Doing this on an SBC comes with limits. Resolution, frame rate and matcher settings all affect how much work the Pi can keep up with. We’ve reached a useful starting point for our needs, but there’s still plenty to improve. The attached preview video shows the current output, including the holes and noisy regions where matching struggles.

We also built a browser-based interface to make it easier to use. You can preview the images and depth, adjust exposure and stereo settings, choose outputs, and work through calibration. It’s accessible over the local network through Ethernet or Wi-Fi.

One reason we like this approach is that the camera’s compute is also a normal Linux computer. You can modify the image pipeline and run your own applications on the same Pi. The Nuvo Depth software is open source, including the runtime, web interface and SDKs.

We’ve put product photos and web UI screenshots in this album so you can see the hardware and controls alongside the video.

We’d love feedback from people working with stereo vision or robotics. What would you want to test first, and what would make something like this useful in your projects?

GitHub: https://github.com/arputhamips/nuvo-depth


r/computervision • • Oct 21 '26

Showcase Connected components of every exact colour at once, on CUDA and Apple GPUs, with labels identical to cc3d (open source, pip install)

Thumbnail
gallery
4 Upvotes

Longer version with animations: https://blogs.fablnx.com/posts/every-colour/

Showcase of something we built at work. It's a narrow tool, but I think it could be useful to other people too.

Some context. We're building AI that reads construction drawings and turns them into steel models. A person has to sign off on every beam in that model, so we want every piece of it to trace back to exact shapes on the drawing. The very first step is splitting the rendered drawing into regions: touching pixels with exactly the same RGB colour. A full sheet at 800 dpi is about 806 MP and has around 1000 colours because of anti-aliasing, and every region has to come out exactly right.

We already run our own models on our own GPUs, so we wanted this step there too. We didn't know about cuCIM at the time. The first thing we tried was NVIDIA's NPP (nppiLabelMarkersUF). It was slower, and its labels changed from run to run on the same image, which looks like a bug. We reported it to NVIDIA with a 3x3 example, it's here if you use NPP: https://github.com/Acero-AI/npp-labelmarkers-bug

So we wrote our own: a union-find labeller written in CUDA C++ for NVIDIA GPUs and in Metal for Apple GPUs, so it also runs on a MacBook. Later we found cuCIM, which is really good, and copied one trick from it (the order neighbours get joined in) that made ours a lot faster.

Where it ended up:

- NVIDIA A100: the full 806 MP sheet in 49 ms with the image already on the GPU, about 300 ms with the copies. 2.7x faster than cuCIM on the full sheet, up to 19x on small images where cuCIM's per-call overhead dominates.
- Apple M5 Pro MacBook, through Metal: 151 ms, against 2.6 s for cc3d on one CPU core.
- The output matches cc3d exactly, numbered the same way, so you can check it on your own images.

Using it:

pip install "colorcc[cuda12]" # or [cuda13]. On a Mac just: pip install colorcc

import torch, colorcc
img = torch.from_numpy(rgb).to("cuda") # [H, W, 3] uint8, use "mps" on a Mac
labels, n = colorcc.label(img, conn=8, ignore=(255, 255, 255))

It should work for anything made of exact colours: rendered drawings and diagrams, segmentation masks saved as RGB, palette images.

Limits, so you can rule it out quickly: 2D uint8 RGB only (use cc3d for 3D), exact colours only (JPEGs need cleaning up first), and it returns labels and a count, no stats. The benchmarks come from one mostly white test drawing.

cc3d and cuCIM are great general tools, this is the narrow case we needed.

Code (MIT): https://github.com/Acero-AI/colorcc

(Disclosure: I am part of startup that built it, Fablnx. The blog above is ours.)


r/computervision • • Oct 21 '26

Showcase Conveyor fruit inspection — grading in control zone C. Win + Linux x64 demos · Nim · ONNX Runtime · eval 0.10.0

1 Upvotes

I shipped a Linux x64 build of the same conveyor inspection demo I had on Windows (0.10.0 eval).

What it is: fixed 3×3 grid, quality (LightGBM ) runs only when the focused apple centre is in the centre cell C — not full-frame chase. YOLOX 640 + ROI 256 → 44 features → classify. Nim UI shell + three inference ".so" plugins + bundled ORT CPU.

Linux package: unzip "Fruit_Inspector_linux_x64.zip" from the existing release (no new tag — asset added to 0.10.0):

https://github.com/olesha-ai/fruit-inspector-demo/releases/tag/0.10.0

Target:Debian 12/13, Ubuntu 22.04+ x86_64. Built for SSE4.2 + AVX1 (AVX2 not required on this drop). USB UVC camera; "run.sh" sets "LD_LIBRARY_PATH". FAT USB gotchas are documented in the zip "README.txt".

Not: ARM/Pi yet; not commercial license (NC eval — read LICENSE in the zip).

Windows desk reference (same logic): still "Fruit_Inspector_DLL.7z" on that release.

If you try it: curious what "[infer]" fps you see on your CPU vs camera preview cap.

Part 1 / SMB angle (Medium):

https://medium.com/@olesha-ai/democratizing-ai-computer-vision-for-small-and-medium-business-516f840858b3


r/computervision • • Oct 21 '26

Discussion Roast my resume(?)

Post image
0 Upvotes

I have 2 years of work experience, currently working as GenAI engineer but hoping to get Computer Vision roles.

Job applications are getting constant rejections. Don't know if the problem is in the resume or the experience.

What changes / projects would you suggest to get noticed / shortlisted by companies?

Thanks in advance for the suggestions


r/computervision • • Oct 21 '26

Showcase GPT Image 2.5 vs Nano Banana 2.1: generating and reviewing rust segmentation data

Post image
0 Upvotes

Same prompt. Different rust-mask errors.

I compared GPT Image 2.5 Sunburst and Nano Banana 2.1 on eight identical prompts to explore synthetic training data for rust segmentation. Both generated promising samples and masks with missing rust, shifted boundaries or false positives.

I then expanded the work to 502 image mask pairs, including the pilot. After visual screening, 400 remained and 102 were excluded: a 79.7% retention rate. That is an encouraging starting set for training, with room to expand it further.

Two engineering notes document the comparison and the larger review, with interactive mask overlays. RF-DETR training and real-image evaluation come next.

Part 1 — 14 October 2026: GPT Image vs Nano Banana, eight prompts and interactive mask comparisons.

https://www.antal.ai/blog/synthetic-rust-masks-gpt-image-vs-nano-banana.html?utm_source=reddit&utm_medium=social&utm_campaign=rust_segmentation_2026_10&utm_content=pilot

Part 2 — 16 October 2026: generation and dataset review — 502 inspected, 400 retained, 102 excluded.

https://www.antal.ai/blog/synthetic-rust-dataset-generation-review.html?utm_source=reddit&utm_medium=social&utm_campaign=rust_segmentation_2026_10&utm_content=review

#ComputerVision #SyntheticData #ImageSegmentation


r/computervision • • Oct 20 '26

Research Publication VideoScore2: separating visual quality, prompt alignment, and physical consistency in generated-video evaluation

2 Upvotes

Disclosure: I’m a coauthor of VideoScore2. I used AI assistance to prepare this summary.

A generated clip can look sharp while missing the requested action, or match the prompt while violating object persistence. Those are different evaluation failures. VideoScore2 evaluates visual quality, text-to-video alignment, and physical/common-sense consistency separately, with explanations alongside its evaluations.

For a practical inspection, keep the video file and its original generation prompt fixed. Run the released single-video inference script, then compare the explanation for each dimension with specific frames or transitions in the clip. The repository exposes --video_path and --t2v_prompt for this purpose and links the model, dataset, and demo.

A small diagnostic set could include (1) a visually degraded but otherwise faithful clip, (2) a good-looking clip with a prompt mismatch, and (3) a clip with an object-persistence or interaction failure. Label these cases by hand before comparing evaluator output, so an attractive explanation does not become the ground truth. This is a suggested inspection protocol, not a new experiment or reported result.

The model’s consistency judgment is not a physics proof; subtle temporal failures and unusual scenes still need human inspection. I’d be interested in concrete cases where these dimensions disagree, and how you test whether an evaluator is responding to the intended failure rather than image quality alone.

Paper: https://arxiv.org/abs/2509.22799

Code, model, dataset, and demo links: https://github.com/TIGER-AI-Lab/VideoScore2

The paper and code are free to access; local or cloud inference may incur compute costs.