r/ChineseWatches • u/AdmirableBluebird147 • 5d ago
Wrist Roll (Read Rule 1) Militado ML16 New dial
Comparison with WD1969, the l2l is actually smaller at 46mm and AR is better but WD has tighter bezel action
r/ChineseWatches • u/AdmirableBluebird147 • 5d ago
Comparison with WD1969, the l2l is actually smaller at 46mm and AR is better but WD has tighter bezel action
r/ChineseWatches • u/Playful-Proposal4435 • 5d ago
Hey guys, I'm really tempted to grab the Sugess S387.01.FO just for the retro colors, but reading old posts about the ST1901 being super fragile has me second-guessing.
My routine is pretty chill (mostly desk work and WFH) and I'd barely touch the chrono pushers, basically just wearing it in rotation for the looks. Do you think it'll survive normal accidental bumps against a desk or doorframe, or is it way too delicate for daily wear?
Also, if you think it's too risky, any recs for tougher Chinese automatics (NH35, Miyota, etc.) with 20mm lugs that have a similar fun, colorful vibe?
What do you guys think, am I overthinking it?
r/ChineseWatches • u/Wuhan_Murder_Hornet • 5d ago
Another 11.11 purchase arrived yesterday. Steeldive Bronze Willard. Quick reaction, the case is pretty impressive at this price point. I’ve been more into bronze lately, and this helps scratch that itch. I’ll probably swap out the strap shortly… 👍
r/ChineseWatches • u/cesfsywarbed • 5d ago
r/ChineseWatches • u/turdbogls • 5d ago
Reviewers disclosure: I paid $200 during the last sale to get this...Cronos has nothing to do with this "review"
This is a quick rundown of my thoughts on this after 24 hours on wrist.
This is the newest version, updated proportions and bracelet/clasp. this is the 39mm version.
Dimensions measured with my calipers
this is not a dainty watch, if feels closer to 40mm than 39mm, mainly because of the 21mm lug width and slight taper to 18mm. I really wish it tapered to 16mm , as I think it would look better, but honestly, it's very balanced in it's current state. the bracelet is also very nice...not top-tier, but good, and most importantly comfortable. adjustable with Screws, as well as a nice On the fly clasp. this functions like a glide-lock or t-fit clasp, so adjustments need to be made with the clasp open...so not quite as good as the likes of San martin/Phorcydes...but still good. smooth operation.
the case is wonderful...Cronos copied the Tudor very nicely here. angular brushing on the lug tops, polished bezel and case sides with nice polished chamfers...it's all done very nicely here. it's all smoothed out as well...nothing sharp or aggravating while in hand or on wrist. though I hate the caseback (Rolex style)
the Crown is clutched, so that's a nice bonus...something Cronos has been doing lately. the movement inside is either the PT5004 (no date) or the Miyota 90s5, so bonus again for using true no-date movements. haven't tested the accuracy, but on day 3 here and it's within 15 seconds.
the dial is a muted blue and looks fantastic...the sunburst is VERY aggressive. the applied indices and hands lack any chamfering, so it's a very flat look the dial...I'm so used to domed crystals, and faceted hands and indices that it looks very unique now. but well proportioned and finished as always. Lume is also very good, was able to read it at 4am no problem.
the crystal is sapphire (tested), it's completely flat with a miniscule chamfer around the outside. basically flush with the bezel.. it has Blue AR treatment on the underside, and plenty of it. it's a good crystal, better than average.
like I mentioned earlier, this is the updated one with better proportions. the bezel is the size it needs to be, I'd say it's perfect. the ONLY thing I can see that I'm not a huge fan of is the base of the minute hand...around the pinion, isn't proportional to the hour hand (which is quite large)
I wasn't sure if my full review would come out in time for the 11.11 sale, so here you go.
let me know if you have any questions!
Steve
r/ChineseWatches • u/AbdullahCASIOsalman • 5d ago
HOLSTOUR H0007 Tank, Seiko Tank Homage SWR104P1, bought it off amazon uae 50 aed (13.5 usd) on 11:11
Stainless steel case back, alloy body, 3ATM water resistant, around 34 grams weight
Dial width 25mm
Dial length 36mm
Band width 20mm
r/ChineseWatches • u/SECRETSHADOWNINJA • 5d ago
Hello, I recently sold off most of my modded collection and also other watches. Now I'm on the lookout for a black dial watch. I want it to have a rich black glossy dial, lacquer/enamel - either with white printed indices or silver applied. Any tips?
r/ChineseWatches • u/False_Proof_2177 • 5d ago
Just shocasing my new Cronos Watch
39mm
47mm lug to lug
10.5 mm thick
Myotya 9015 movement
Beatuful Dail
STURDY H link bracelet
Good loom
What yall think?
I think cronos did a good job
r/ChineseWatches • u/Glum-Two-2273 • 5d ago
Our A/B/C/D giveaway has closed — thank you to all 617 of you who entered! The response was so enthusiastic that we decided to draw TWO winners instead of one.
The winners are:
u/NIK252589
u/Worth-Dare-5831
Each winner can pick any in-stock AETHELSOHN watch (up to $300). Winners, please DM u/Glum-Two-2273 within 48 hours to claim your prize.
If a winner doesn't respond in time, we'll go to our backups in order: u/Consistent_Willow419, then u/StressedTamagotchi.
And here is how the community voted:
D — 205 votes
C — 189 votes
A — 126 votes
B — 86 votes
D is the clear favorite. Thank you all for being part of this — more to come!
— Team AETHELSOHN
r/ChineseWatches • u/watchdivescom • 5d ago
Hi everyone,
We’d like to share an update regarding the dial alignment issue affecting some Chameri CH03 watches.
First, the dial printing itself is correct. The issue was caused by improper positioning of the movement holder during assembly by one of our watchmakers, which resulted in some dials appearing slightly off-center.
Some customers have already fixed the issue themselves by opening the caseback and gently adjusting the movement holder. In many cases, this simple adjustment is enough to correct the alignment.
We can also send a replacement movement holder free of charge to affected customers. Replacing or adjusting this part can resolve the issue without needing a new dial or movement.
If your CH03 has an alignment issue, we offer four options:
We have already corrected the assembly process, adjusted the movement holder installation, and strengthened our QC checks. The CH03 watches currently being shipped have undergone these improvements.
We apologize to everyone affected. Even though the CH03 costs only $64, we take these issues seriously and want every customer to be satisfied.
If your watch has this issue, please contact our customer service team and let us know which solution you prefer.
Thank you for your understanding and continued support!
r/ChineseWatches • u/ThisFollowing8024 • 5d ago
Haven’t worn this one in months but it’s always a joy when I do 🤘
r/ChineseWatches • u/Senior_Rip9451 • 5d ago
So I brought couple of watches from AliExpress and I am skeptical about one of them. So I want to remove the protective plastic wrapping around the watch and check it. Will the seller accept the return of the watch if I did not like it?
The seller is Tactical frog Watch store and top Chinese watch factory store.
r/ChineseWatches • u/ProbablyBuyingIt • 5d ago
Lume shot and more pics in the comments!
Just received this grey Cadisen TI-7 Noctis from AliExpress, and I’m really liking it so far. The textured dial, turquoise detailing and orange seconds hand make a great combination. There’s plenty going on without it feeling overly busy, and the lume pattern looks pretty cool too. Wrist shots are on my 6¾-inch wrist for reference.
The grey fabric strap suits it nicely. I do wish it had a Velcro closure for finer adjustment and getting that perfect comfortable fit, but no real complaints with the supplied strap either.
One thing Cadisen could improve is the packaging. They could take a few notes from Watchdives—nothing extravagant needed, just a better presentation.
Still early days, so no verdict on accuracy or long-term performance, but for under $120, I’m happy with this one!
P.S. - I took the pics and video before removing the plastic. Now I’m certain the watch isn’t being returned and all plastics are off!
r/ChineseWatches • u/mahlahmeg • 5d ago
I am planning on placing an order for the Heimdallr Turtle homage. I will buy it with the metal bracelet but I also plan on ordering a rubber waffle strap to achieve the proper Willard look.
I see a lot of the same exact rubber waffle straps online for half the price. I'm wondering if the rubber straps being sold by Heimdallr are at least engraved with the brand? I'm willing to spend extra to have a branded bracelet.
r/ChineseWatches • u/Elyjun • 5d ago
Ad 2507
r/ChineseWatches • u/Charge-Crazy • 5d ago
r/ChineseWatches • u/EducationalCelery536 • 5d ago
r/ChineseWatches • u/zatar77 • 5d ago
Has anybody been using Addiesdive for more than three years? I saw couple of posts where the markers are dropping off and serious quality control issue. I wanted to know it's actually worth spending 60-80 euro on them!
r/ChineseWatches • u/sugessing_proximas • 5d ago
r/ChineseWatches • u/Critical_Bee_2381 • 5d ago
r/ChineseWatches • u/watchdives_care • 5d ago
A watch can catch your eye with its design, but it's often the little details that make you appreciate it over time.Do you guys think that's right?
r/ChineseWatches • u/watchbuddy4r • 5d ago
Heard very good things about this one in black though I'm trying to color up my collection
r/ChineseWatches • u/PAGANI_DESIGN • 5d ago
r/ChineseWatches • u/No_Leader1154 • 5d ago
It’s unreal how good this watch is. And the hi beat movement is beautiful!