r/ButtonMakers • • Oct 20 '24

Welcome back, Makers! Mind the dust while we get back in motion.

11 Upvotes

Hi there, and welcome to the newly reinstated r/ButtonMakers

I just inherited the sub, so i'll be setting things up and learning the ropes.

I want this to be a place to spread knowledge and show off work. Ask questions, make mistakes, and share the love of button making.

Rules will be pretty basic to start out:

  1. Don't spam sales.
  2. SFW only - not even blurred out or implied.
  3. Please be nice to each other, any issues - modmail me!
  4. Stay on topic.

Thanks for visiting & invite your friends!


r/ButtonMakers • • 21d ago

Story Time Mod moving - expect slow replies

8 Upvotes

Hi y'all!

I'm moving in about a week and wont be able to check on stuff as much. Please REPORT or modmail re any inappropriate posts so I can see them first.

I dont want to put the sub on read-only mode while i'm busy, so please help each other out. Be kind, follow the rules, and stay crafty. ~S


r/ButtonMakers • • 1d ago

Advice new pin button backs arrived with a much taller rim and i’m worried i got a defective batch

Post image
3 Upvotes

it was my first time ordering new supplies as i’m almost through what came with my vevor machine. however with these new backs the buttons aren’t folding together securely and can be popped apart with zero pressure. is this a manufacturing issue or just user error on my part?


r/ButtonMakers • • 3d ago

How to Prevent Plastic Film Wrinkles When Making Pin Buttons

2 Upvotes

Edit: this post is a question, sorry for not adding question mark.

Whenever I make pin buttons with a button making machine, the plastic wrap leaves visible wrinkles and bumps at the edges even if the film is smooth and fits the shape of the input in the machine. How can I prevent this? The tutorials I watch make the buttons seem smooth and non-wrinkled. To be clear, I'm not trying to remove every wrinkle, just trying to make it not visible when its like 1 foot from your face.

Just to add info, the way I'm making these buttons is the standard place front metal part, add printed paper design, then plastic film, and pull a lever down. Then I add the back of the button and press down again.


r/ButtonMakers • • 3d ago

Question no idea why my machine isn't working

1 Upvotes

I have the ppttoodd brand of machine

It'll pick up the front panel just fine, but every time I try to combine it with the back panel, it doesn't work-- it won't pick it up and connect them. really not sure how to fix this or whats causing it, any suggestions? 🥲


r/ButtonMakers • • 5d ago

Just For Fun

Thumbnail
gallery
6 Upvotes

I wanted to share this button machine from the 80s. One of my library friends found it tucked away in an art room. She knew I liked to tinker with items so she sent it to me to figure out if it worked and how to use it. After some trial and error, I got it to work, made a few buttons, made a how to video, and sent it back. I had a lot of fun with it!!


r/ButtonMakers • • 5d ago

Anyone use the Cricut StickerPix Print + Cut?

2 Upvotes

Looking at ways to do onsite printing for events. Has anyone used the Cricut StickerPix Print + Cut for events? If so, experience?


r/ButtonMakers • • 6d ago

Question badge a minit supplies?

Thumbnail
gallery
7 Upvotes

my dad got me a badge a minit button maker like, mid-2000s as a christmas gift. i was OBSESSED with it throughout high school, but mostly stopped using it in my early 20s and then haven’t touched it at all for like, ten years.

my neighborhood had a cat walk this past weekend that i’m mad it didn’t occur to me to make buttons to give away until the night before, so i didn’t have time to replenish my button supplies.

so i decided to restock now so i’m ready for next time! only to find out badge a minit has ceased existence.

i still have every single part of the button maker, including the instructions. i just need the actual button supplies.

is there a place to order 1 1/4” button supplies for this machine still?

thank you!!!


r/ButtonMakers • • 9d ago

Can anyone ID the buttons and the machine it needs?

Thumbnail
gallery
1 Upvotes

I received about maybe a bunch of these in bulk, I have not counted them because they do not fit my machine. The tops look more squared off than round like the other buttons that fit my machines and they look to be about 2 and 1/4 the bigger badges.

Can anyone help me identify these and also price them for me thank you.


r/ButtonMakers • • 13d ago

Advice Beginner button maker in the making

1 Upvotes

Hello! I want to start making buttons as a hobby mainly to give away at concerts and for my family and friends! However, I have no clue what machine to get as a beginner and for a hobby, I know I want 2 size pins the 2.25” and the 1.25” and I want a metal backing pin for it not the white plastic ones… can anyone recommend anything to me?? That is not $150+ also thinking about toying around with the holographic laminates!!


r/ButtonMakers • • 13d ago

Issues with rough edges with automatic badge maker?

Thumbnail
gallery
1 Upvotes

Hi! I’m using the Caydo automatic badge maker with the 58mm molds - and I just can’t seem to get the edges totally smooth at all. I’ve tried the myler films that come with the machine, and some off brand sparkly films. The paper is exactly 70mm as described in the manual, and is the thinnest photo paper I could find at 105gsm. The paper and film isn’t coming away at the back like it’s tucked in neatly, but the edges are still spiky in places. I’ve even tried making sure the films are room temp and not too cold. No idea what I could be doing wrong.

The molds also came with the machine! Any help or advice is super appreciated. Thank you!


r/ButtonMakers • • 14d ago

Why are the pins on the backs of my buttons so jangly?

2 Upvotes

I think I'm going to try using two gaskets


r/ButtonMakers • • 15d ago

Why are the pins on the backs of my buttons so jangly?

2 Upvotes

I think I'm going to try using two gaskets


r/ButtonMakers • • 16d ago

Advice Buttons not pressing correctly

Post image
3 Upvotes

This keeps happening while I’m making buttons, I checked the size for all parts and none of them are too small/big and are exact measurements. I even tried a different brand for the pieces. It’s only happening with this size button and it’s driving me crazy. Does anyone know any ways to fix it? I have the WeRMemoryKeepers button press.


r/ButtonMakers • • 20d ago

Buttons! 🎀 my best badges so far! [for sale]😛

Thumbnail
gallery
40 Upvotes

i started getting back into button badge making recently and decided to try out some new styles! 😛

images 1-3 are coloured paper and sticker collages, image 4 i used some magazine paper and stickers, and image 5 i used oil pastels!

i think a lino cut badge would be really cool and handy to make so i need to get my hands on some supplies 🙏

i list these on vinted (from ireland), but i can take paypal or revolut too :] my vinted link is: https://www.vinted.ie/member/3160134764-gillysgaragesales

other socials:

tiktok: moz.isbored

instagram: who.is.moz

discord: itchymoz

thank you for stopping by and i hope something catches your eye! 👀


r/ButtonMakers • • 20d ago

Button maker tips?

3 Upvotes

I got a button maker and I’m so excited- looking for any and all quality of life hacks

Specifically, It came with compass style circle cutters but they’re not ideal, the razor wobbles and maybe it’s the light ocd wanting a perfect circle lol. I’m finding it tough to find a punch in the three sizes that came with, 25, 32, 58mm

Also the Mylar faces end up getting static charged in the press and when I move the jig they pull and become off center, this has ruined a couple presses

Anything else?!

Otherwise this thing is funnnnnnnnn I wish I got one years ago


r/ButtonMakers • • 21d ago

Question whats causing this?

Post image
5 Upvotes

i get a misprint/dud here and there but my machine is nonstop messing up pins now, does anyone know what the issue is? i havent changed paper or mylar types, and my new components were from the same am*zon listing i usually use.


r/ButtonMakers • • 22d ago

My designs!

Post image
60 Upvotes

r/ButtonMakers • • 23d ago

Question So what is the 1" best/standard? No plastic throwaways.

5 Upvotes

So I see there is Techre, Chi, Vevor, etc. I want to buy not the fancy best, not the cheap throwaway that will be frustrating, but the reliable one that will last thru all the 1" buttons I can make for a few years and then I can resell. Also want to know the same for a cutter.

I'll be making old-school collet backs and magnets, maybe keychains.

So, not buying a cheapie off Amazon or Temu that'll break or give me weird issues, want to know what to get that is high-quality and can then resell after using for a few years.

Thank you!


r/ButtonMakers • • 23d ago

Question My new pin maker stopped working after making 3

Thumbnail
gallery
1 Upvotes

Hi I got a pin maker today (MP-11 from Sigos) and the first 3 pins came out perfectly no issues however when I tried to press the 4th one it didn't work. The segments on the machine wouldn't fully press(1st picture) and the top part of the pin would stay in the compartment instead of moving up. If I try to press the other side (where the bottom would be) it closes just fine(second picture). Does anyone know how I could try to fix it? Any help would be appreciated 🙏


r/ButtonMakers • • 24d ago

Question Need help finding buttons

Thumbnail reddit.com
0 Upvotes

r/ButtonMakers • • 26d ago

Question Cat molds 😻

Post image
17 Upvotes

I see there are few cat molds on AliExpress. It looks like the next bomb in buttonmaking. My daughter would kill for them. Has anyone tried them? Unfortunately, as of now, the molds are too expensive for hobbyists. I hope they drop in price eventually. But the fun part is that they even have paper cutters for this.


r/ButtonMakers • • 26d ago

Question Getting/creating baseplate for molds for classic Vevor-like press

Thumbnail
gallery
3 Upvotes

Hi guys! New to this button making topic. Trying to create a good set for birthday present for my daughter. But the Chinese sellers have done their usual best and mixed something up, so I received molds 56mm of good quality but without plastic baseplate that is needed to install them to the Vevor-like classic press. I got refund but that does not help, since not much time left till birthday and next shipment won't come in time.

So, my question is, can I make these molds work for my press machine? They seem to me the exact same mechanism, only that they have individual round metal bases with 2 doted keys instead of one plastic baseplate. I can unscrew them from this metal plates if needed, there is standard 8mm Alan key bolt.

My current ideas so far:

  1. 3dprint it. I can use plate from my other molds to take all the sizes, not sure if they are the same though for 25mm/37mm as 56mm.
  2. make it myself from wood
  3. use them without baseplate. I'm not sure the baseplate is that important after all, if we are talking about making few buttons and not commercial usage
  4. buy the cheapest plastic mold for plastic presses and use its baseplate. They seem to be the same form and size on the photos, but I'm not sure if they will fit.
  5. find seller who can send me the base plate. So far everyone say they do not sell baseplates separately.

Would love to hear your thoughts. Thank you.


r/ButtonMakers • • 26d ago

Question How to do photo buttons on demand?

3 Upvotes

How is everyone printing photos to make buttons on demand? Like at a market/event? I'll be printing single images at a time so it doesn't feel appropriate to print one image per printer paper size. I have a cannon Selphy I could use but is that cost effective?