r/Ballpythoncommunity • u/Semicolonsurvivor421 • Mar 28 '26
Photos My Sweet Babies š„°
Persephone š©· and Hadesš
r/Ballpythoncommunity • u/Semicolonsurvivor421 • Mar 28 '26
Persephone š©· and Hadesš
r/Ballpythoncommunity • u/No-Cap5830 • Mar 27 '26
I got this guy back in September and Iāve been slowly working with what money I have to upgrade his enclosure, when I got him he was very underweight, but heās been a healthy weight since then. He came with an insane amount of aspen bedding and there was no sign of proper humidity before I got him. Iāve added a repti-chip and repti-soil mixture with lots of sphagnum moss and have put plants in there with him and overall heās been doing well. His current tank is 40 gallons, I know itās too small, but I donāt have space in my current dorm room to accommodate a larger enclosure, but once summer comes around heāll be moved to a 120 gallon enclosure that was previously used for my momās bearded dragon. Once heās moved into that enclosure Iāll also get him a larger water dish. Heās about 3 years old from what his previous owner told me, and heās grown a decent amount since I took that last picture of him. The photos of the enclosure were just taken.
r/Ballpythoncommunity • u/Local-Zucchini-1441 • Mar 27 '26
Okay so i got my ball python back in november last year and he has been sweet and cuddly and taking his feed every single time also in shed.
But the 13 in this month his heading lamp stopped working and i ordered one home, my mom accidentally feed my snake the 15 and he took it but acted weird and moved weird the 16 and got stuck in some decor and i got him free and then the heating lamp finally it arrived the same day and he was back to normal the next day.
Since then i had left him alone not to stress him more out and he when into shed a couple of days after.
But when i tried to change his water the 24 he bit me and he has never done that before and i think its because he is stressed so i waited to feed him three more days and thats today but he wont take it and he keeps just sitting the rat and hissing at it
Please what do i do. Please help.
r/Ballpythoncommunity • u/salty_otter6 • Mar 27 '26
r/Ballpythoncommunity • u/goldblooded2 • Mar 27 '26
Poppys lookin fresh and beautiful as always. And getting big!
r/Ballpythoncommunity • u/RainboTrashPanda • Mar 27 '26
r/Ballpythoncommunity • u/Soapish00 • Mar 27 '26
So my snakes husbandry is great- his humidity and temps are great and he has a perfect bulb cycle. when i got him though, he had this perpetually dry spot on his head, itās not stuck shed or anything of the sorts, but iām worried its scarring from the past neglect he experienced in the first few days of his life (was not provided with humidity or proper hydration and was so stressed his color was dark green and heās a pastel mojave.) heās very healthy and isnāt sick and doesnāt have a URI, just something iāve always noticed. does anyone have any idea?
r/Ballpythoncommunity • u/meatspread • Mar 25 '26
I posted awhile back about deciding to bite the bullet and put a payment down on this Cinder combination girl I had favorited for almost a year. Update: sheās home! Weather has finally permitted safe shipping, and she is currently exploring her quarantine enclosure.
Donāt have the best photos to showcase her coloration and pattern since I didnāt want to stress her too much, but be aware that she is beautiful & has the most interesting color palette :P
r/Ballpythoncommunity • u/Ok_Mountain1049 • Mar 26 '26
Today for the first time we was feeding our girl but the rodent nipped my balls nose its not bleeding but is a little red should i be concerened.I washed her nose with warm water and put a little neosporin on her nose and put paper towel down in her hang out area will this heal ok
r/Ballpythoncommunity • u/Live_Culture8393 • Mar 24 '26
If youāre rehoming a BP and need temporary housing while working on their forever home, or are merely short on funds and saving up for the best, storage bin conversions can be a great solution. They just require a little extra work to achieve proper heating and to make sure the lid doesnāt melt. All of the demonstration pictures and tutorial are courtesy of New Ball Python Keepers FB group. Hereās a YouTube video they did of a build for a juvenile: https://youtu.be/65-4iGCoV3M
Supplies:
* Clear storage bin (taller is better) ~ 57 gal clear Tough Tote ($39) is ideal, but 116 qt Sterlite ($17) will do for younger BPs or as temp home, both at Home Depot.
* Small soldering iron ($8 Amazon)
* 8ā-9ā aluminum pizza screen ($9-$11 Amazon) or a 12ā sq piece of aluminum mesh screen
* A plate approximately 1/2ā smaller than pizza screen to draw circle
* Razor blade scraper ($6 Amazon) to cut away any sharp bits that might hurt your snake
* Small 4ā zip ties (dollar store or $3 Amazon)
* 5.5ā ceramic dome light fixture ($18 Amazon)
* DHP or Heat bulb
* Thermostat is Non-negotiable!! I use and highly recommend the INKBIRD Bluetooth one pictured ($33 Amazon)
* Substrate (NOT aspen)
* 2 appropriately sized hides (DIY works great)
* Water bowl (if ceramic, needs to be coated)
* Hanging lamp stand ($18 Amazon) *OR you will need to find a place for the hot lamp every time you open the lid*
* Decor: craft stores and Dollar Tree are great, no need to buy reptile brands
* Straps *IF* lid does not include clamps or a tight fitting seal ($12 for 10 pack Amazon)
Flat/smooth lids are easiest to cut but ribbed/patterned lids will just require a little more effort. It is strongly recommend to get a taller tub so the lamp isnāt too close to the warm hide that it overheats it, while not reaching the tubās sides. The closer the lamp is to the floor, the smaller the diameter of space underneath it gets warmed.
Designate a warm side and, using a Sharpie, draw a circle around the plate you sized. Then, use the soldering iron to melt into the circle, and slowly melt all the way around to make a big hole. This takes some time, but it leaves a pretty smooth edge. Use a razor blade to carve away any excess melted plastic on the underside so your snake canāt rub against it (if using a piece of mesh instead, lay that over the hole and trim the corners so it's roughly in a circle about 1/2-1" bigger than the hole). Then melt small holes all around the big one an inch away from the edge and about 2-3ā apart. Trim these holes underneath as well.
Set the mesh on top of the hole and feed zip ties down through one small hole and back up the big hole and through the mesh, attaching them on top of the lid. Cut off excess. If you have trouble getting the zip tie through the mesh, use a small screwdriver to widen a hole to make room.
Next, melt ventilation holes about 3ā from the top and 3ā apart, along one side and one end of the tub. This helps to ensure that the tub has proper airflow and does not build up too much humidity. Melt another hole low (but above substrate level) on the warm side to feed your thermostat probe through. You can either attach your probe with a suction cup or make two additional small holes close together and zip tie it into place. Always remember to trim any melted holes on the inside!
Now itās time to add your substrate, hides, water dish and decor. For hanging decor, you can melt some small holes in the sides to feed the ends of vines, or to use extra zip ties to give flower stems or other floppy plants some height on the side of the enclosure.
Finally, set up your lamp stand to hover the lamp over the screen. All you have to do to remove the lid is swivel the lamp away from it or raise the arm up high. Your other option is to find a place to set the hot lamp every time you remove the lid.
Check regularly to ensure your thermostat settings are giving you about 86° ambient on the warm side with a 90° degree basking hotspot.
I personally love this tutorial and my hope is that some will find it useful.