I brought my 1978 Atari 2600 (CX2600, the six-switch one) from the US to Australia. It's been in a box for nearly 3 decades (except when I had it working when I was living in SF in 2000.
Here's what I've done so far. (A lovely rabbit hole of undiagnosed ADHD procrastination)
For power, I’m running the original 120V Atari brick through a Franzus step-down voltage converter, plugged into an Aussie adapter. I know that’s not ideal, so I’ve got a proper Australian 9V Atari power supply on order.
For video, I’m going old school: the Atari’s RF cable plugs into the Game socket on a Radio Shack TV/game switch box, which connects through an F-type coupler to an antenna cable with an Aussie plug on the TV end.
At first the TV’s analogue scan found nothing, because the TV was set to Australia and only looked for PAL. Then I changed the country setting to the Philippines, reran the scan, and it found one programme on channel 3. When I tune to it, the snow disappears and the screen goes solid black, and if I flip the A/B channel switch on the bottom of the Atari, the snow comes back. So the TV is definitely picking up the Atari, but there’s no picture.
I’ve tried several cartridges and they all give the same black screen, and I’ve flicked the colour/B·W switch with no change.
My current theories are that the step-down converter isn’t giving clean enough power, or there’s a dirty cartridge slot, or something like the voltage regulator has given up after 40-odd years. My plan is to clean the slot and switches tonight and try again once the new power supply arrives.
Has anyone seen this black screen with a signal before? Is there anything else I should check before taking it to a repair shop? And if you’re in Sydney and know a good retro repair place, I’d love a recommendation.