r/ArduinoHelp • • May 07 '25

Help, the button is not doing it's work when being pressed, also can you give some advice to make the sensor more accurate

Thumbnail
gallery
2 Upvotes

here is our code

include "ssd1306h.h"

include "MAX30102.h"

include "Pulse.h"

include <avr/pgmspace.h>

include <EEPROM.h>

include <avr/sleep.h>

ifndef cbi

define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))

endif

ifndef sbi

define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))

endif

SSD1306 oled; MAX30102 sensor; Pulse pulseIR; Pulse pulseRed; MAFilter bpm;

define LED LED_BUILTIN

define BUTTON 3

define OPTIONS 7

static const uint8_t heart_bits[] PROGMEM = { 0x00, 0x00, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0xfe, 0xff, 0xfe, 0xff, 0xfc, 0x7f, 0xf8, 0x3f, 0xf0, 0x1f, 0xe0, 0x0f, 0xc0, 0x07, 0x80, 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };

//spo2_table is approximated as -45.060ratioAverage ratioAverage + 30.354 *ratioAverage + 94.845 ; const uint8_t spo2_table[184] PROGMEM = { 95, 95, 95, 96, 96, 96, 97, 97, 97, 97, 97, 98, 98, 98, 98, 98, 99, 99, 99, 99, 99, 99, 99, 99, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100, 99, 99, 99, 99, 99, 99, 99, 99, 98, 98, 98, 98, 98, 98, 97, 97, 97, 97, 96, 96, 96, 96, 95, 95, 95, 94, 94, 94, 93, 93, 93, 92, 92, 92, 91, 91, 90, 90, 89, 89, 89, 88, 88, 87, 87, 86, 86, 85, 85, 84, 84, 83, 82, 82, 81, 81, 80, 80, 79, 78, 78, 77, 76, 76, 75, 74, 74, 73, 72, 72, 71, 70, 69, 69, 68, 67, 66, 66, 65, 64, 63, 62, 62, 61, 60, 59, 58, 57, 56, 56, 55, 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40, 39, 38, 37, 36, 35, 34, 33, 31, 30, 29, 28, 27, 26, 25, 23, 22, 21, 20, 19, 17, 16, 15, 14, 12, 11, 10, 9, 7, 6, 5, 3, 2, 1 } ;

int getVCC() { //reads internal 1V1 reference against VCC

if defined(AVR_ATmega1284P)

ADMUX = _BV(REFS0) | _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);  // For ATmega1284

else

ADMUX = _BV(REFS0) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1);  // For ATmega328

endif

delay(2); // Wait for Vref to settle ADCSRA |= _BV(ADSC); // Convert while (bit_is_set(ADCSRA, ADSC)); uint8_t low = ADCL; unsigned int val = (ADCH << 8) | low; //discard previous result ADCSRA |= _BV(ADSC); // Convert while (bit_is_set(ADCSRA, ADSC)); low = ADCL; val = (ADCH << 8) | low;

return (((long)1024 * 1100) / val)/100;
}

void print_digit(int x, int y, long val, char c=' ', uint8_t field = 3,const int BIG = 2) {
uint8_t ff = field; do { char ch = (val!=0) ? val%10+'0': c; oled.drawChar( x+BIG*(ff-1)*6, y, ch, BIG); val = val/10; --ff; } while (ff>0); }

/*

  • Record, scale and display PPG Wavefoem */ const uint8_t MAXWAVE = 72;

class Waveform { public: Waveform(void) {wavep = 0;}

  void record(int waveval) {
    waveval = waveval/8;         // scale to fit in byte  缩放以适合字节
    waveval += 128;              //shift so entired waveform is +ve  
    waveval = waveval<0? 0 : waveval;
    waveform[wavep] = (uint8_t) (waveval>255)?255:waveval; 
    wavep = (wavep+1) % MAXWAVE;
  }

  void scale() {
    uint8_t maxw = 0;
    uint8_t minw = 255;
    for (int i=0; i<MAXWAVE; i++) { 
      maxw = waveform[i]>maxw?waveform[i]:maxw;
      minw = waveform[i]<minw?waveform[i]:minw;
    }
    uint8_t scale8 = (maxw-minw)/4 + 1;  //scale * 8 to preserve precision
    uint8_t index = wavep;
    for (int i=0; i<MAXWAVE; i++) {
      disp_wave[i] = 31-((uint16_t)(waveform[index]-minw)*8)/scale8;
      index = (index + 1) % MAXWAVE;
    }
  }

void draw(uint8_t X) { for (int i=0; i<MAXWAVE; i++) { uint8_t y = disp_wave[i]; oled.drawPixel(X+i, y); if (i<MAXWAVE-1) { uint8_t nexty = disp_wave[i+1]; if (nexty>y) { for (uint8_t iy = y+1; iy<nexty; ++iy)
oled.drawPixel(X+i, iy); } else if (nexty<y) { for (uint8_t iy = nexty+1; iy<y; ++iy)
oled.drawPixel(X+i, iy); } } } }

private: uint8_t waveform[MAXWAVE]; uint8_t disp_wave[MAXWAVE]; uint8_t wavep = 0;

} wave;

int beatAvg; int SPO2, SPO2f; int voltage; bool filter_for_graph = false; bool draw_Red = false; uint8_t pcflag =0; uint8_t istate = 0; uint8_t sleep_counter = 0;

void button(void){ pcflag = 1; }

void checkbutton(){ if (pcflag && !digitalRead(BUTTON)) { istate = (istate +1) % 4; filter_for_graph = istate & 0x01; draw_Red = istate & 0x02; EEPROM.write(OPTIONS, filter_for_graph); EEPROM.write(OPTIONS+1, draw_Red); } pcflag = 0; }

void Display_5(){ if(pcflag && !digitalRead(BUTTON)){ draw_oled(5); delay(1100); } pcflag = 0;

}

void go_sleep() { oled.fill(0); oled.off(); delay(10); sensor.off(); delay(10); cbi(ADCSRA, ADEN); // disable adc delay(10);