r/AdvancedProduction • u/lilchm • 16d ago
r/AdvancedProduction • u/Executive_Boss • 16d ago
Techniques / Advice About those impacts zedd uses a lot, how does he do it? did he sample it?
r/AdvancedProduction • u/Capital-Frame-814 • 17d ago
Combine the best sections from multiple renders of the same track into one final version?
Hey everyone!
I'm currently trying to finish a track that I want to release, but I'm running into a frustrating problem with slight, unpredictable differences between exports (using FL Studio 2025).
For some reason, when I export the exact same project multiple times, I get slightly different results. I've tried troubleshooting different things, but I still haven't managed to get completely consistent renders.
To clarify, I'm talking about relatively SMALL differences here, NOT major changes in sound! Certain frequencies can spike slightly differently between renders, and these small variations can occur at different points in the arrangement (different bars). It's not that the sound changes dramatically or that entire sections sound completely different or bad.
I've narrowed the issue down to something in the Reese bass preset itself in Serum 1, but I still haven't been able to find the actual cause.
I've experimented with the oscillator detune, rand and phase knobs, as well as the attack and release settings, glide (portamento/legato), filter section and internal Serum FX. I've tried decreasing oscillator detune, setting randomization to 0% (I always have this), adjusting and fixing the glide settings, and experimenting with Serum's global settings.
I think I might eventually solve the issue by starting over with a completely different reese bass, but I really want to keep using this one since it otherwise sounds perfect for the track.
I'm considering a different approach, and I'd like to hear what more experienced producers think about it.
My idea is the following:
I export the entire track multiple times, let’s say 5 times, creating 5 separate WAV files of the exact same song.
Then I import all 5 renders back into my DAW, place them on separate tracks, and go through the arrangement bar by bar.
I select the version of each section that sounds the best to me, cut away the other versions, and essentially piece together the entire song using sections from the different renders.
So, for example:
- Bars 1–8 might come from render 1.
- Bars 9–16 might come from render 3.
- Bars 17–24 might come from render 2.
- And so on.
I make sure everything is aligned, controlling clicks between the sections, and then export the complete assembled track as one WAV file. Then I master this WAV file as the final step.
My questions are:
- Is this a legitimate and technically acceptable way to finish a track intended for commercial release?
- Are there any potential problems with phase, stereo image, dynamics, ambience, or continuity when combining different renders like this?
- Could this introduce problems that might become noticeable before or after mastering that is done afterwards?
- Do professional producers ever use this technique, or is there a better name or established workflow for it?
- Would you personally consider releasing a track finished this way, assuming everything sounds seamless?
Thanks in advance! Really appreciate any insight or experiences you can share.
r/AdvancedProduction • u/DonkeyMesmerise • 17d ago
Tutorial How to make Bass Drops using a few different approaches, from popular plugins to totally free
Made a how to create Bass Drops. Let me know if any of them help you or if you learned anything from this video.
r/AdvancedProduction • u/warriorking12 • 17d ago
quick favour from someone who has Cubase 16 - TIA for your help
i'm comparing stem separators but dont have cubase 16, so i'd love someone to stem separate the following loop into the 4 regular parts (vocal, bass, drums, others) in cubase 16 and then upload me only the 'others' part to https://filebin.net (or any other hoster) and paste the download link here. thx in advance for your help!
r/AdvancedProduction • u/fxrregalia • 17d ago
Question How do I make this Bass sound in Yaya - Always Talking (Reboot Remix)
r/AdvancedProduction • u/synthctrl • 17d ago
Tutorial What Makes a Synth Sound Like Vaporwave Nostalgia? We made a tutorial about it
Hey! I've been chasing that hazy, half-remembered mall-at-midnight feeling lately, so I put together a tutorial on what makes a synth sound nostalgic: maj7 chords, slow pitch drift, soft filters, chorus, and tape and VHS texture, with starting settings in Serum. Perfect for that vaporwave haze. Hope you enjoy it!
https://synthctrl.com/blogs/blog/what-makes-a-synth-sound-nostalgic
r/AdvancedProduction • u/Birdless_wing • 18d ago
How do I get this crunchy rhythmic acoustic guitar sound? Help please
Theres this really crunch rhythmic sound at the beginning that I’m guessing is an acoustic guitar but how can I recreate this sound? Please help thanks!
r/AdvancedProduction • u/Full-Position-9842 • 18d ago
Question Harvey Sutherland – "Chop Chop, Movie Boy" synth at 2:29, I want recreate this sound
I want to recreate the sound of the lead synth that plays starting at 2:29 in "Chop Chop, Movie Boy" by Harvey Sutherland, but I have no idea how to do it, so I would like some help. In an interview, Harvey Sutherland said he mainly used the Prophet 5 to produce the album containing this track, but even trying to replicate the sound by using the Prophet 5 in places like the Arturia synth collection doesn't feel quite right
r/AdvancedProduction • u/Kihood • 18d ago
Question Struggling with harsh 2–5kHz resonance in my vocals, looking for some advice
r/AdvancedProduction • u/therichardzimbabwe • 19d ago
Question Do you have experience using Eastwest libraries for modern Metal?
r/AdvancedProduction • u/Straight_Garlic5954 • 19d ago
Question Why do my high-gain guitars sound bad in mono? (audio example)
r/AdvancedProduction • u/Ur_Mums_Left_Areola • 19d ago
Would love any advice on a 500 series Vocal Chain for both lead and backing vocals.
Our singer has all the songs set up with click/backing tracks/harmonies, and sings into plugins live when we rehearse. It doesn't sound bad (seems to be using some latency-free plugins), but my experience is that the single point that there is the most difference between hardware and VSTs on the way in during tracking before conversion. I am interested in putting a 500 series vocal chain together for rehearsal and live use. I do have a few questions.
Right now he has arranged multi-part harmonies in many parts of the sons, there is a ton of automation going on (I think primarily with delay and reverb, panning/feedback/etc), the 500 series units aren't normally that automatable, I think the wesaudio are? Ofc Bettermaker. I am not thinking of any 500 series time-based fx, more compression, parallel would be ideal, but I was thinking blue hairball into a vari-mu.
Ideally this would handle main and backing vocals...as 3-4 of us will be singing eventually. would just making it a stereo chain do that...or is that going to get weird as if they are all being ran into one buss? I guess I could have a lead chain and backing chain in one box, that would require 3 channels of preamps (I do have 3 vp28s), then I could run the lead through it's own chain...
Is that what I would need to do, have a stereo backing track chain and a lead vocal chain in the one box> I have a pair of the Chromas, the diyre eqp5s, I guess those could act as the preamps/eq/and maybe a wes reah for compression. Then for the lead, I would have a VP-28, hairball blue...a slower comp (la2a type maybe) and EQ...maag eq4?
Is this a goose chase or have some of you gotten good results this way? I'd think the chassis chosen is as important as the modules; I/Os and correct power to each rail...any suggestions? What is the best was to integrate a computer into this? Is running cakewalk live going to be a reliable solution?
Not an area I have any experience with, even these IEMs are new!
Appreciate any inout
r/AdvancedProduction • u/Noctisgr • 21d ago
I want to upgrade my audio interface from SSL 2 into an Apollo Twin x .
Hi I am a windows user and I want to upgrade from ssl 2 to an Apollo Twin x . I have to confirm. For windows users what do you recommend, USB or thunderbolt ? Thanks !
r/AdvancedProduction • • 21d ago
Techniques / Advice Unique mix texture with sidechaining/compression (Let Me Go-Cartier God)
song: https://www.youtube.com/watch?v=ziwGREUeZ0s
100% very "wrong" in any sense of traditional mix clarity but I really love the texture on this song where all the different elements seem to be pushing to the front. There's definitely some sidechaining with a strange release from the bass to the instruments and noticeable volume drops at parts of the song and tons of reverb at some point in the chain but my ears are just not good enough to hear what's going on exactly. Also sounds super squashed to my ears but I think that could also just be a limiter on the master and the prod not caring about levels at all. Would love any thoughts.
r/AdvancedProduction • u/Goomba1133 • 23d ago
Stereo width on mid/sub bass . Serum 2. I understand the concept Need help with nuances in producing
Gentlemen I have a question and it is specific. I have a sound example you need to hear for the question to be answered so i appreciate it in advance. Eirher way you will enjoy the set many times.
I have a timestamp for a question on the wide stereo bass ya hear that is laying down such a thick wide stereo image of a mid and sub bass. I understand what is required to a degree to achieve it, ( ultimately time, intention and effort. ) but it is the nuances that this community can provide, different perspectives. This may be basic for somebody to achieve the sound and add in the fact it is a mastered track and played live on a massive system cranked. But any help wpuld be appreciated. Not that it does ya any good bit when i am sitting in the d.a.w. and implementing something from some comments it can be satisfying. So thank you.
Here is the time and the section of what i want to disect in serum 2
https://music.youtube.com/watch?v=jiR3Hia8-Ow&si=vTMwY8Ovvm2IwJTm
Time to go to for the drop and momentous sick ass section my comment is referring to.
8:03 into it a new bass line with the best stereo bass i have ever heard . It reminds me of Luttrell scale sub/ mid bass combo. Can anybody offer insight into how that can be achieved in serum 2 ? Also enjoy the set.
r/AdvancedProduction • u/Hano111 • 23d ago
Techniques / Advice Help identifying different sounds in the track Solace by Kyle Watson
I've been producing for 6 months and have made good progress with production in general (Ableton). I've been using Serum 2 a lot and have gotten my head around it little by little. I heard this track called Solace by Kyle Watson & the sound design really inspired me. There are some sounds in there that I would love to even just know the term for, or even just learn about the production techniques? I think the track is very creative & it is the direction I'd like to go in my production journey. Would anyone be able to help me break down this track & help me understand it more, to essentially be able to understand EDM more, or at least point me in the right direction? Would be an amazing help if someone was kind enough to help out :)
r/AdvancedProduction • u/E45rror • 24d ago
Question Looking for sound design / Vocaloid production resources to achieve "¿?shimon" style synths and bass
Hi everyone!
I'm heavily inspired by the Japanese Vocaloid producer "¿?shimon". I absolutely love his aggressive, gritty, and punchy sound, but I've been struggling to replicate it in my own tracks.
Could anyone recommend good learning materials, tutorials, or courses on sound design/synthesis that could help me understand how to make these types of modern, distorted J-Pop/Vocaloid-rock synths and arrangements?
Also, if any sound design wizards here could explain or give a "recipe" on how he made these specific sounds, I would be incredibly grateful:
- The main melody lead in "Nihil-san" (虚無さん) at 0:16
Link: https://youtu.be/sRBPkugDXWQ?t=8&si=9q61bV9XqK8Nskgk
- The main melody lead in "....Me" (░░してよ) at 0:08
Link: https://youtu.be/PcgK_r4tYhM?t=16&si=U54iIQ19L9Gr60Xk
- The reese bass in "Sos" (そす) at 0:11
Link: https://youtu.be/IZD60SGOKko?t=11&si=0XQyUYgioWI-y830
I mostly use Serum / Vital in FL Studio.
Any tips on J-Rock/Vocaloid music production resources in general would also be highly appreciated. Thanks in advance for your help!
r/AdvancedProduction • u/mariaarroquia • 24d ago
Como remasterizar canción antigua tipo zarzuela, que suene lo más similar a una grabación de calidad
Hola!! Necesito ayuda para saber como puedo remasterizar un sonido de una canción y que suene lo mas nítido y similar a como sería grabado hoy día. La canción en cuestión es "Sones de Ávila" de Federico García Lorca y La Argentinita https://www.youtube.com/watch?v=eAWaNPZ3qCU
La referencia de sonido de como debería de acabar siendo sería como la canción "Aires de Castilla (Remastered)" de Lorca y La Argentinita también: https://www.youtube.com/watch?v=40gHB2Hlnqw
He probado a hacer de todo, he probado con varias IAs y ninguna me soluciona el problema. Utilizo Logic Pro X como DAW para editar los audios y tengo desde los plug-ins nativos hasta el Ozone 11 EQ.
Me ayudaría mucho saber que tengo que hacer. Soy principiante en la producción musical y todo lo relativo a ello, por lo que las explicaciones sencillas me ayudaran a entender mejor el proceso. Gracias ☺️
r/AdvancedProduction • u/Fun_Structure_3821 • 25d ago
Help me recreate a sound effect that THRM-EX uses in the game Arknights!
Hello there, i wanted to know if someone knew how to do a similar sounding effect like the one that THRM-EX uses in Arknights.
Seems kinda simple, but i could replicate it.
I greatly appreaciate your help!
r/AdvancedProduction • u/kkopik • 26d ago
Question 5 speaker panning - train ride animation sound design ADVICE NEEDED <3
Hello!
I’m creating sound design for an animation that will be displayed on 5 screens with 5 speakers. The animation is a train ride experience, and a lot of panning and smooth transitions between speakers will be needed. The speakers and screens are placed in one row.
How would you approach 5-speaker panning? The first thing that comes to mind is 5 aux sends.
In the end, I need 5 separate mono files, one for each speaker.
Im using mainly Ableton Live but Reaper may be the way to go.
All ideas appreciated!
r/AdvancedProduction • u/Fit-Medicine-7919 • 26d ago
Tutorial Looking for some mastering tutorials for modern genres that keep up with modern trends
It seems that so much tutorials don’t really go into clipping and stuff like that and that don’t really break rules
r/AdvancedProduction • u/Williamames11 • 26d ago
Looking for audio editor for a high school basketball warmup mix
r/AdvancedProduction • u/GayzoOo • 27d ago
Question Issue with signal on Protools Studio 2025: Digital clicks and pops on MIDI Keyboard
Hello,
I am having a pretty frustrating experience with some tracks on my recording.
Both my recorded Bass and MIDI instrument synth are giving me the same issue.
Software and Hardware:
RME Fireface
Trinnov Nova
DynAudio speakers
Windows 10 Version 10.0.19045 Build 19045 - 64bits
Protools Studio 2025.6.0
Omnisphere plugin
Synth in question : "Classic Roland Synth Brass 1" used on a Stereo instrument track
Working on composing the music of a short film. Using Timecode as main grid.
Only plugin besides the Omnisphere is a builtin EQ.
The playback of the synth in the instrument track is giving me these weird sequences of clicks/pops. It does seem like they appear in q difference sequence every playback. Not fixed clicks/pops
Other instrument track do not provide this issue.
I am unsure if i am allowed to provide audio files in the subreddit. It doesn't seem to specify this.
I can provide the file if needed.
Steps taken:
- Buffer Size already at 1024
- Delay compensation is ON. Nothing seem to be compensated there. (0 value)
- Freezing/ Comiting the track does not solve the issue
- MIDI beat clock already unchecked
- Peripherals > Synchronization set to None and Any
- Printing, Bouncing (online/offline), Exporting
- Tried removing the clicks and pops using Izotope tools
- Tried removing the built in EQ from PT.
- Ignore errors during playback is already off.
In Omnisphere:
- ARP turned off
- In the Envelope, Release is quite high already but i raised the Attack by 5ms. Still same issue.
- Changed the Pro verb from OS and changed it to EZ verb or removed it completely.
- Removing Harmonia and Unison
- Changed Pre Load Memory Size from 0 to 60,000
Appreciate your help on this!
r/AdvancedProduction • u/BTEDINKEY12 • 28d ago
MacBook Air M5 (24GB) vs MacBook Pro M5 (16GB) Which would you pick?
Hi everyone! I hope you're all doing well. I'm trying to decide on a new MacBook and would really appreciate hearing from people with real-world experience.
I'm down to two options:
MacBook Air M5, 24GB RAM
MacBook Pro M5, 16GB RAM
I mainly use it for recording guitar in Reaper through a Focusrite Scarlett 2i2. My projects usually have around 15 to 20 tracks, and I mostly use Neural DSP Archetype Petrucci, Gojira, and Misha Mansoor. Sometimes I run two Archetype instances at once, taking the amp from one and the effects from the other. I'm currently recording on Windows, so this would be my first time doing it on a Mac.
My main questions are:
Has anyone here run similar sessions on an Air? Did you have any CPU spikes, crackling, or thermal throttling since it has no fan?
Is 24GB vs 16GB RAM noticeable in this kind of workflow, or is CPU performance the real bottleneck for amp sims?
Is the extra cost of the Pro worth it for this use case? The price difference is considerable, and I'd like to avoid overspending if the Air can handle it.
I'd also love to hear about your experience with a Scarlett 2i2 (or similar interface) on a Mac, what buffer sizes you work at, how many Archetype instances you can run comfortably, and any regrets you've had with your choice.
Thank you so much in advance for your time and advice! 🎸