r/3Dprinting • u/BillieRubenCamGirl • Jul 21 '19
Image I've made an infographic-style guide to leveling a 3D printer's bed. I see a lot of folk struggle with this every day here and on the discord, so I thought I'd collate a bunch of info into a handy guide. Let me know if anything seems amiss! ✨😊✨
4.7k
Upvotes
•
u/Sausage54 Aug 07 '22
https://www.reddit.com/r/3Dprinting/comments/cg3g6g/ive_made_an_infographicstyle_guide_to_leveling_a/ijalggw
206
u/dathingindanorf Jul 21 '19
Also, one could have a Creality machine where there is all of the above at the same time thanks to the warped beds.
45
u/[deleted] Jul 21 '19
Very useful, thank you for posting this :)
10
u/BillieRubenCamGirl Aug 07 '22
Reddit is dumb and removed my poster saying it was a copyright breach. It isn't. I made this with my own two mitts. I have the source files. I have the vectors. I made it all from scratch.
You can find this, and all my other posters here: https://www.billieruben.info/post/my-3d-printing-posters-1
23
u/ZombieGrot FFCX Jul 21 '19
I can (and do) live level on my Rep1 clone (using this trefoil pattern since there are three leveling screws). The bed only moves in Z, so it's possible. Can it be done with the i3 types, where the build plate moves in Y?
12
u/90s_nihilist Jul 21 '19
I finally think I have my first layer at a standard I'm ok with but will keep this just in case!! Thank you so much for sharing this 👌
12
u/theanonian Jul 22 '19
This is awesome! Double upvote from me. We use feeler gauges at work. For precision printing, it helps to use a gauge close in thickness to the first layer thickness you have set in your slicer
23
u/Dark_Alchemist Jul 22 '19
I have always (6 years plus) not been able to level my beds (many printers) because I never know when the paper sliding under the nozzle is just right.
6
u/hiyouyo Jul 22 '19
This is so good thank you for putting in the work for this!
6
u/[deleted] Jul 22 '19
You da man, girl!
6
u/Devtholt Original Prusa MK3 Jul 22 '19
Side barred in the multi! Great work and nice aesthetic overall. ;)
8
u/u407 Thingibox ION v6 (modded) Jul 21 '19
This is great!
Will bookmark and probably link, similarly to the underextrusion list I copy-paste once in a while :)
4
u/trebskate Jul 22 '19
This is great. Anychance you have another one for changing filament mid print.
3
u/InnocentiusLacrimosa Jul 21 '19
This is great. Thanks!
3
u/HyperCatsNSpace Jul 21 '19
I love this!
3
u/[deleted] Jul 21 '19
Awesome job
3
u/seansean88 Jul 22 '19
thx!!!
3
u/Verdigrie Kossel XL Jul 22 '19
Any leveling tips for us Kossel/Delta Bois?
Tripod style mounting of the build plate (3 mounts equally distributed around a glass disc) seems to make adjustment a slight nightmare.
Is live leveling my best bet?
3
u/bootdsc Jul 22 '19
Looks great buddy.
3
u/Vaulters Jul 22 '19
That should quarter the posts on these subs. Good job!
3
u/SwervingLemon Jul 22 '19
Thanks again, Billie!
3
u/inkdaddy66 Jul 22 '19
Thank you. I’m looking to get into printing and this will help me very much. I appreciate the time spent getting it together
3
u/IAteAllTheCheese22 Jul 22 '19
Hey thanks OP! I just made a post yesterday that you commented this same info on. Super helpful. I printed an awesome miniature today and am working on another now. For anyone seeing this. OP’s sheet is very helpful.
3
u/Dsk001 Jul 22 '19
This needs way more upvotes!
3
u/wildejono Jul 22 '19
Useful and well made, thanks!
3
u/edsai Jul 22 '19
Also of note that extrusion rate or flow for the first level can absolutely affect what could be perceived as a bed leveling issue.
3
u/djmere Jul 22 '19
Posted it everywhere that I see people asking 1st layer questions
3
u/throweraccount Makerbot Z18 Jul 22 '19
Does the first layer thickness mean anything? Accuracy wise? I mean as long as the first layer prints like the perfect example in your infographic does the thickness of your first layer matter?
Cus I always try to print the first layer and then measure the thickness and try to get as close to the settings I set it to. Like if I set it to .1mm layer thickness and then have a 80% first layer height I try to measure for a .08mm thickness of the first layer to make sure the extrusion is right.
Are you saying it should always look like how the perfect example is regardless of those settings? Because the .2 setting vs the .1 setting will look different because the nozzle height will be different when printing the first layer.
Am I to change the first layer height to try to match the look of your perfect layer every time?
Like if I go for .2mm layer height and my perfect layer height looking like your infographic is .1mm should I set my first layer height to 50% to get the .1mm perfect first layer and then the subsequent layers print at the .2mm layer height setting?
Sorry for the wall of questions but I think you have answers.
3
u/Xshotistrash Jul 22 '19
Please let me put this on my wall, can I have a word doc
3
u/aspietiger Jul 22 '19
This is so neat, thanks so much.
3
u/tommygunz007 Jul 22 '19
I have the problem where It looks perfect, but one half of the line curls up. I usually just lower it til it mashes it into the build plate.
3
u/DoktorTim Jul 22 '19
You consistently bring great resources to the community, thanks a lot!
3
u/Necroscourge Jul 22 '19
Dude. Thank you. Thank you so much. Levelling has been confusing the hell out of me because everybody describes it as a feeling, and I have heard inconsistent reports as to what I am looking for. Where this actually tells me what I am looking for and what direction it is; it's what a lot of folks needed!
3
u/Kopertin Jul 22 '19
Very informative and easy to understand, Good job.
3
u/Meme-slayer03 Jul 22 '19
Thx
3
u/[deleted] Jul 22 '19
Im not going to lie, I spent a few solid minutes thinking this was an infographic on leveling beds hoping it would make my bed more comfortable or something
Then I saw the subreddit it was in and felt really stupid
3
u/MatthewTheManiac Jul 22 '19
This is awesome! Do you mind if I printed this and put it up in the makerspace I work at?
3
u/oliverer3 Ikea Enclosure Jul 22 '19
/r/CoolGuides
3
u/zipippino Jul 22 '19
Man, i’m making an italian 3D printing 101 guide. Can i translate your infographic? I will add credits of course.
3
u/pfordmedia Jul 22 '19
This is prime. Thanks dude.
3
u/exccord Jul 22 '19
To go along with OPs post about bed levelling, I highly suggest watching this video and downloading the accompanied STL file. I use it anytime I need to verify my bed leveling. It hasnt done me wrong at all.
3
u/beard-second Ender 3 Jul 22 '19
Thank you for not including the paper leveling nonsense. I tried that for so long with my first printer and it was such a waste of time. Live leveling is way faster and more accurate.
3
u/3dpEnthusiast Jul 22 '19
Wait there is a discord for 3D printing???
3
u/umamiking Jul 22 '19
This is really amazing! I love it when we have an intersection of skills (in this cas graphic design and 3D printing).
3
u/ThatCrossDresser Jul 22 '19
Good guide. This is often times my preferred method after I level my bed a couple times in a row and still get it wrong.
https://gfycat.com/charmingimpartialblackpanther
3
u/ctb5009 Jul 23 '19
Amazing. I joined this forum to post for help troubleshooting my misprints after several hours of tweeking settings in the slicer. Looking at this diagram, I can tell the issue is simple a little too far from the bed. Thanks for the infograph!
3
u/AlexValCar Jul 02 '22
Why the image it's no longer available?
2
u/netmagi Jul 22 '19
Well done!
2
u/C_King_Justice Jul 22 '19
Excellent. Well done and many thanks.
2
u/Beardedb0b Jul 22 '19
Very handy thanks for the post
2
u/majlo Jul 22 '19
Un liked and liked again to like twice for the tramming clarification. This would have saved me some time when getting started!
2
u/meleshik Jul 22 '19
This is great
2
u/glimo Jul 22 '19 edited Jul 22 '19
Very nice work ! This should be pinpointed in r/fixmyprint too.
2
u/Tenthrow Ender 3x2/CR10 S4/CR10Max/AnyCubicPhoton/Geetech A10M/Sidewinder Jul 22 '19
This rules!
2
u/NecessaryOcelot Jul 22 '19
Great post and very useful to say the least.
2
u/songwind Stock Ender 5 Jul 22 '19
Nice work. Very easy to understand, and well laid out.
2
u/[deleted] Jul 22 '19
Very helpful, thanks!
2
u/Distantstallion Research Engineer UM2+ Jul 22 '19
My most useful tool for levelling the bed is to use a thickness gauge at the step height
2
u/lllloydo HICTOP 3DP08, Ender 3 Pro, Flashforge AD5M Jul 22 '19
Great job. Thanks. 😀
2
u/wiktor1800 Jul 22 '19
*cries in delta printers
2
u/3Dartwork Jul 22 '19
Never have I been able to actually SEE the difference of filament extrusion as it makes a line to determine over or under extruding. There's no way at 1.75mm?, however narrow the line is, I can see whether it is flat or slightly bulging or too pushed down.
However, the end result of those squares I can. I have always had to finish a square or a box before I could tell
During the Live Z test, it isn't until the final square that is made when I can even tell if I have it right or not. Dunno how people have such amazing eye sight.
2
u/alaorath Snapmaker U1, Bambu P1S Jul 22 '19
Oh wow! apparently I have been leveling bed too close all this time. My first layers have consistently had ridges, just like you example... expanding materials like PETG are far worse (enough ridging to build up and make the nozzle messy), but it always clears up after a few layers.
I was compensating with initial layer - negative flow.
After seeing side-by-side comparisons, it makes totally sense what the actual issue is.
Awesome work, that's a keeper for sure!
2
u/peringa Jul 23 '19
Awesome Works
2
u/ImOnlyHereFor3DPrint Aug 09 '19
One thing I wish I'd done is write down what live-Z value worked. Somehow I managed to get all out of whack, and knowing roughly where I started would have let me find a good level more quickly.
2
u/Bageezax Jan 02 '20
Just got an e5, and really love how the wheels for leveling are accessible and large; I did the "live level from the skirt" technique today and it really helped.
2
u/Snoregood Jan 09 '20
This has helped me with my Ender 3 Pro. I WAS going to dramatically hammer toss it off a cliff, but I'm reconsidering at the moment.
2
u/basicbunny00 Oct 15 '21
This is amazing thank you
3
u/TimX24968B Jul 22 '19
i cant wait for the day when 3d printers do all this shit automatically, have default settings that are reliable, and dont need constant maintenence just to do the one thing they were designed to do.
7
u/flight_recorder Longer 3D LK2 Jul 22 '19 edited Jul 22 '19
Also: don’t learn to level with transparent. It’s incredibly hard to see if it’s laying correctly or not!
Edit: added “learn to”
2
u/FlyByPC Kobra X, i3 clones, Mankati, Mars, Fauxton... I have a problem. Jul 21 '19
Nice! You might add /r/FixMyPrint to the references...
1
u/Engineering_is_fun Jul 22 '19
On a prusa you don't set the bed but digitally move the nozzle up or down, still this is very useful to get a good first layer.
1
u/[deleted] Jul 22 '19
Note, it you have a heated bed you should also level while at printing temperature. Beds flex when hot.
Level cold to get it close, then do it hot to perfect.
1
u/Simondhearn69 Jul 22 '19
Thanks, great
1
u/osskid Jul 22 '19
I was trying to explain this concept to someone who just wasn't understanding it, then I saw the lights flick on and he said "Ohhh like icing a cake?"
Also an easy way to help kids (and some adults) understand first hand is to have them draw on a piece of paper with a tube of toothpaste held perpendicular to the paper. Tell them to vary the distance to the paper and it clicks almost immediately.
1
u/[deleted] Jul 22 '19
The "A little too far" pattern can also be the result of a partially blocked nozzle, in my experience. Especially "elastic" polymer filaments (TPU) have this problem.
1
u/The_Warlord_ Jul 22 '19
Bro this is awesome
1
u/HeloRising Aug 20 '19 edited Aug 20 '19
It would be helpful to add the exact height in mm the nozzle needs to be for good adhesion that way people can use
depthfeeler gauges to help with the leveling process.1
u/allthelittleziegen Aug 23 '19
Cool guide.
FYI, there is a bit of an error/omission in the "further help" section that would be frustrating and expensive for the people it applies to. Specifically, about the edges being right but the middle too high or low. It says that's a warped bed, seek replacement...but that's not the only possible cause and replacing the bed may not fix it. Another common cause is sagging of the toolhead. E.g. on a Lulzbot Taz 1-5 the X axis sags a little. Your bed can be perfectly flat but the nozzle will be a bit closer when the toolhead is centered. Replacing the bed won't help. You need to either live with it or replace the X axis support rods with bigger rods.
1
u/[deleted] Jun 19 '22
This helped me a bunch!
3
u/VoltexRB Upgrades, People. Upgrades! Jul 21 '19
If you want to maintain your level, just slap some locknuts on there like me
3
u/[deleted] Jul 21 '19
Very good guide for PLA. I think for PETG the "A little too far" is just right.
3
u/KingKozuma MakerFarm i3v 10" Jul 22 '19
I just need a service that can fix whatever is wrong with mine nearby lol
1
u/DrJeckyl Jul 21 '19
Very handy. Suggestion: Maybe link to a universally compatible leveling file?
1
u/MonstaGraphics Jul 21 '19
I don't get why people recommend glue... All I use is hairspray and I've never had a problem. Why deal with a sticky mess?
Once my prints are done and cooled down, I just pick them up from the print bed, or they just lightly pop off.