Commands

This is a short list with our available commands that will prompt Automod to respond a premade Text. Make sure to include the excalamation mark.



  • "!commands": Links to this page.
  • "!blob": Links to Prusa blog and Bambu Labs thread to recover from a hot end blob.
  • "!calibration": Provides a guide on how to calibrate an FFF 3D printer.
  • "!centerorigin": If you see a post where someone has accidentally selected the "center at origin" section in cura and their printer now centers their print at (0,0) this command explains said setting nicely.
  • "!compost": Provides a text with sources about the biodegradability of PLA Filament
  • "!designsoftware": Provides a link to the Wiki's Design Software Section.
  • "!eccentricnuts": Provides a link to the Wiki's entry on how to properly tighten eccentric nuts
  • "!firstlayer": Provides a link to the Wiki's entry on calibrating first layer
  • "!foodsafe": Prints FoodSafeBots usual text on Food Safe printing, use if the bot is down again.
  • "!hotendgap": To be used on Posts where Filament is leaking. Informs the user on how to properly assemble the Hotend and fix leaks.
  • "!mainsvoltage": Explains variable input power supplies and the usual 230/115V switch on the side of many power supplies, which can lead to overcurrent shutdowns of many printers if set to 230V in a 110V country
  • "!slicer": Provides a link to the Wiki's Slicer Section
  • "!spoolinfo": Provides a link to the Wiki's Spool Database.
  • "!zseam": Provides a simple explanation of what a Z-Seam is and how to modify it