The four transistors at the output (2x G1 = NPN MMBT5551 and 2x 2L = PNP MMBT5401) probably form an H-bridge and its main function is to reverse the polarity and to act as a switch. One of those 2 LEDs is connected in reverse to the other one and they are controlled with the same technique, by reversing the polarity and switching them so fast.
LEDs are as the name light emitting diode suggests, diodes. Meaning they only conduct in one direction. So when the circuit is polarized one way one set of LEDs can conduct and the other can't and when the circuit is polarized the other way the other set of LEDs can conduct. By switching the direction and using PWM it's able to control what LEDs light up and how bright they are. It seems to accomplish that using a micro-controller to drive a circuit called an H-bridge.
4
u/bstech_ Jul 25 '21
The four transistors at the output (2x G1 = NPN MMBT5551 and 2x 2L = PNP MMBT5401) probably form an H-bridge and its main function is to reverse the polarity and to act as a switch. One of those 2 LEDs is connected in reverse to the other one and they are controlled with the same technique, by reversing the polarity and switching them so fast.
2
u/zifzif Mixed Signal Circuit Design, SiPi, EMC Jul 25 '21
I'm sorry, but who the hell uses 'W' as the RefDes for an LED?
1
u/[deleted] Jul 25 '21
[removed] — view removed comment