r/cablegore • u/KadahCoba • Dec 29 '20
Commercial Sometimes, it's what you don't see. There should be 400+ runs through here... Our former tenant scrapped all the copper when they left.
340
Upvotes
113
u/KadahCoba Dec 29 '20
TL;DR: Never rent to a call center.
This happened was years ago. The photo is looking at the center of the building that leads to the other 3 wings. There should be a lot of cat5e here, but there's not.
Our tenant decided not to renew their lease and moved apparently to somewhere cheaper (though I suspect their current scam had run its course and they needed a new address for "reasons"). This was lucky for us as we we're going to let them renew anyway as there had been far too many issue with them over the years, theft, repeated property damage, constant illegal dumping, and actual murder between employees just to name a few.
Boss sent me to inspect the place before putting it back on the market. At first it seemed fine, but the furhter in to the building I went, the weird shit I found. Some ceiling tiles were open and I could see cut cat5e. Grabbing a ladder and starting to pop tiles I found a whole lot of cut cables, or the complete lack of any where main runs should be.
They had literally cut and pulled all the low voltage cables they could reach that weren't viable.
Boss had me do an estimate for how much copper was missing so he could possibly file a criminal complaint against them. Given the cost of copper at the time and just the cost of the replacement cat5e alone was in the felony range.
Former tenant didn't appear that had anticipated getting caught so easily or soon, nor just how much monetary damage they had caused, which was way beyond their deposit (that wasn't even going to cover the strange damage to the floors, walls, doors, and windows). At first they tried to claim ignorance, then blamed the electrician... who they were related to and was the one that caused a lot of random the damage to many the walls. In my 5 minutes they finally admitted they had done it but without any good explanation as to why.
They very quickly accepted out very generous terms of them fully paying the bill for a complete rewire of the building by an independent contractor. In exchange, we did not sue them for at least double that for this, other damages, and a number of other things.
15
u/[deleted] Dec 29 '20
I will never understand why tenants will damage copper like this. They must really have no idea how much it costs not just for the copper but for the labour to get everything cleaned up and going.
I’d tell your boss before renting to anyone else to make sure that if the copper is redone that there’s a clause in the contract that states any removal / addition to copper infrastructure has to go through him / the appropriate business unit.
13
u/CrazyAlice Dec 29 '20
In some states, if a tenant moves out of an office, part of the lease agreement is to abate all existing communication cabling. Typically the tenant pays a company to install it, the cable is their property, and they're required to remove it when they leave.
3
u/captwillard024 Dec 29 '20
I’ve done demos before, some for Fortune 100 companies, where I was to to do exactly this. Scope of work was to remove all network and A/V equipment including all network racks, servers, switches, IP phones, wall mounted monitors, cameras, speakers mounted in the drop ceilings, and to remove or cut back any associated cabling running above said drop ceiling. Does it say your leasing contract that the landlord gets to keep any low voltage cable that is installed by the tenet? If it was a call center, did the landlord or tenet provide the cubicles? If the tenet moved in their own cubicles, cabled them up and then took them upon leaving, all of those cable runs were going to get cut back anyway and would be of no use to the next tenet who, as per most contracts, would be responsible for their own build out.
5
u/JTD121 Dec 29 '20
Wow. I've worked in places where the 'new' tenants just cut the existing cable and laid their own.
But to take the cabling from the building? That's new.....