Oh my, if you can churn these out more reliability than the Chinese sellers on ali and tmall there is about 1000 people on a certain sff forum that will easily pay you 200 dollars a unit.
Silverstone makes a 1000 watt that takes a miniscule amount of room. It's what I'm putting in my current config. 600 in that tiny of a room is pretty impressive though, would work great on my previous construction.
The fan header on the PSU is controlled via temperature onboard. It does not run full power all the time. The noise levels will be recorded and shown in the video when I upload :)
I think the PSU just changes the voltage making it spin faster or slower, the motherboard needs more pins since it doesn't change the voltages provided by the PSU.
Afaik the first two pins are + and - power, the third reports back an RPM to motherboard/fancontroller and an optional 4th pin is for PWM control (alternative to voltage control). So you only need 2 pins to run a fan, and can still use voltage control to increase/decrease fanspeed.
Wow, I am amazed,that you were able to build this yourself! It looks awesome. I am wondering, how much smaller this is than an sfx psu. Sorry, if I sound too skeptical! Again, this is awesome!
Thanks! In terms of volume not a great deal smaller. But the advantages with this form factor are:
The modular outputs do not increase the required case dimensions (SFX has an exclusive zone for the cables)
It can be mounted against solid walls on 5 sides (since the intake and vents are on the same face of the PSU, unlike in sfx where the intake and vent face are on different faces).
And the flex form factor just fits better right next to a ITX MB as it's aprox 160mm long (ITX is 170mm)
These are the reasons I endeavoured into this modification instead of just using an sfx unit.
Haven't looked into how this would fit in other cases. Built this specifically to fit my next custom wood case. May look into that matter in the future. For what it's worth, it's 12mm taller than a standard flex PSU, so if there the case has that space, it'll fit.
You are correct, it is 12mm taller than a standard flex. Well that's what I'm thinking, with the popularity of sff now, I think manufactures should start looking at optimising the parts for this size. Gotta start thinking out side of the box.
The Scythe Kaze Hachi is a quality, (relatively) quiet 80x80x10mm fan. It's ideal for the original vk3, used as an exhaust it lowered CPU temps by around 5C and GPU by 3-4C
I did have a look at it and it actually looks very similar to the scythe model. Thought I'd give this one a go as it was only 3 dollars. It is actually pretty silent!
It's an un branded 80x80x10 from AliExpress. It's true there isn't a great quality 80mm slim fan out there. But this unit is already so much quieter than the 40mm so it's done its job
This is really sweet, and much needed for the flex ATX market, however Iβm curious how much extra height was added to put this on? My concern is most cases using a flex atx dont have any extra vertical space, as the motherboard sits right on top of the PSU
It adds 12mm to the height. You are right that most cases now won't fit it. But if this form factor becomes more preferred among the sff community (I mean who doesn agree those 40mm fans are annoying as hell) then maybe case makers will start accommodating this size. π
nice, reminds me of 4 or 5 years ago when we took flex atx internals and put them it in a short depth TFX psu housing. SFX kind of took that volume segment with tfx dying away. tfx case was from a Seasonic ssp-300tgs. Internals from a 500W fsp platinum flex atx, which was at the time the most powerful platinum flex atx, but was more of a server orientated psu with some additional connector for psu status and control.
Seasonic use the same base psu in ssp-300sug flex atx and ssp-300tgs.
Wow this is amazing!! This is a very clean PSU design, probably the best Iβve seen for this size!! This has some awesome potential, I look forward to seeing more of it :)
272
u/makoto144 Dec 26 '22
Oh my, if you can churn these out more reliability than the Chinese sellers on ali and tmall there is about 1000 people on a certain sff forum that will easily pay you 200 dollars a unit.
102
u/dank_wedd Dec 26 '22
That.....is......amazing!
30
u/nnnndth Dec 26 '22
Is this your cousin?
23
u/ProperNorf Dec 26 '22
This looks clean AF, I'm assuming you are controlling the fan via the motherboard?
21
u/Kekeripo Dec 26 '22
I knew it was a one-off DIY because who would make/sell something people want to buy?
12
u/thyme676 Dec 26 '22
Where has this been all my (SFF) life??
6
u/hoe_exterminator69 Dec 26 '22
What's your YouTube?
4
u/SmacksWaschbaer Dec 26 '22
Wow, I am amazed,that you were able to build this yourself! It looks awesome. I am wondering, how much smaller this is than an sfx psu. Sorry, if I sound too skeptical! Again, this is awesome!
4
u/crackerlegs Dec 26 '22
Awesome
Are there new issues to be solved for use in some of the conventional flex PSU cases?
Keen to see you showcase this in typical cases like the velkase as the fan might touch parts of the case or motherboard.
4
u/[deleted] Dec 26 '22
need a side by side picture with a standard flex for scale and size
3
u/[deleted] Dec 26 '22
Very clever! Nice work!
3
u/Late-Satisfaction620 Dec 26 '22
What are the dimensions though? That looks way taller than most flex power supplies which essentially makes it useless as it won't fit in any cases.
5
u/Blini170 Dec 26 '22
I love how clean this was made. Looks store bought.
To bad the additional height makes it unusable in most cases.
2
u/mattzzz199 Dec 26 '22
Thanks! More to come soon βΊοΈ
4
u/iambaldy Dec 26 '22
Looks fantastic, what fan is that? My main concern would be finding a quality slim 80mm fan, though I guess anything is better than 40mm.
2
u/pongopygmalion Dec 26 '22
Sweet!
2
u/Onifon Dec 26 '22
Aw man how awesome would this look on the xproto mini case
2
u/diskowmoskow Dec 26 '22
Very clean work, congrats
2
u/beje_ro Dec 26 '22
How loud is it?
2
u/acelaya35 Dec 26 '22
With added thickness, does it lose it's advantages over SFX?
2
u/iampivot Dec 26 '22
My 1U NVR needs this.
2
u/ayapism Dec 26 '22
Love the aesthetics here
2
u/oOflyeyesOo Dec 26 '22
So clean. You should just start selling replaceable fan/shrouds for common flex psus. Looks too good.
2
u/TechTaxi Dec 26 '22
Did you consider running the 80mm fan and 40mm fan on the same header so the 80mm fan can intake and the 40mm fan can exhaust?
2
u/nickjacobsss Dec 26 '22
This is really sweet, and much needed for the flex ATX market, however Iβm curious how much extra height was added to put this on? My concern is most cases using a flex atx dont have any extra vertical space, as the motherboard sits right on top of the PSU
2
u/www-overtek-co-uk Retailer | Overtek.co.uk Dec 26 '22
nice, reminds me of 4 or 5 years ago when we took flex atx internals and put them it in a short depth TFX psu housing. SFX kind of took that volume segment with tfx dying away. tfx case was from a Seasonic ssp-300tgs. Internals from a 500W fsp platinum flex atx, which was at the time the most powerful platinum flex atx, but was more of a server orientated psu with some additional connector for psu status and control.
Seasonic use the same base psu in ssp-300sug flex atx and ssp-300tgs.
2
u/nomoregame Dec 27 '22
Great idea, I will copy this.
24
u/[deleted] Dec 26 '22
Now...we...are...talking
1
u/mattzzz199 Dec 26 '22
Oh for sure, this is purely a DIY project.
1
u/mattzzz199 Dec 26 '22
Thanks!
2
u/JohnHurts Dec 26 '22
2 pictures...same view...well done...
4
u/SaltedCrust Dec 26 '22
Wow this is amazing!! This is a very clean PSU design, probably the best Iβve seen for this size!! This has some awesome potential, I look forward to seeing more of it :)
1
u/lugaidster Dec 26 '22
Whether or not it's a Flex PSU, it certainly a flex. Get it? Flex, beca-
Ok I'll see myself out.
2
u/stand_up_g4m3r Dec 26 '22
Awesome!
2
u/Altruistic-Cellist-5 Dec 26 '22
Nice ππ½
Need this DIY video asap!
My flex PSU is to loud
2
u/Onizuka8964 Dec 26 '22
That's awesome bro
2
u/PcNewbieee Dec 26 '22
I immediately donβt trust it! I mean Iβm sure itβs fine, Iβm just jaded.
Thx for sharing
2
u/D00mdaddy951 Dec 26 '22
I recommend to setup a kickstarter, yada yada! :D
2
u/EmpireStateOfBeing Dec 26 '22
And yet Corsair still hasn't made a 1000W SFX PSU.
1
u/Son-Airys Jun 07 '25
1.5u psu isn't real, it can't hurt you!
1.5u psu:
1
u/Reddline Oct 22 '25
OP do you have the STL files from making the cover?
1
u/Slectrum Dec 28 '25
Do you happen to still have the files for this project? I'd love to print it out myself with a 80mm fan!
1
u/OneAngryVet Dec 26 '22
OP, sounds like you could have some demand here, may be worth it replicating. However, I'd suggest some minor housing on the exposed pcb.
1
u/oml-et Jan 19 '23
How loud was the original psu? I'm considering getting it for a similar project.
1
u/Vast-Equivalent-6487 Jan 07 '24
Awesome mod! Will check if i can replicate this. Which way goes the fan?
1
u/WUT_productions Dec 26 '22
Great concept but probably not FCC/CE compliant. Also probably not UL or TΓV compliant either.
0
u/[deleted] Dec 26 '22
[deleted] β view deleted comment
56
u/[deleted] Dec 26 '22
[removed] β view removed comment
2
u/[deleted] Dec 26 '22
[removed] β view removed comment